Carbon emission reduction and cost–benefit of methane digester systems on hog farms in China

Three different sizes of hog farms were selected to analyze the carbon emissions reduction and the cost–benefit of three methane digester systems. The sizes of the digesters are 2,200, 2,200 and 800 m³, respectively. The sales of slaughter hogs from them are 50,000, 35,000 and 10,000 head, respectively. The carbon emissions reductions were 5,237, 4,017, and 1,334 tons, respectively. The results show that while the methane digester systems have a significant effect on carbon emissions reduction, it is difficult to operate the systems sustainably. If the carbon emissions reduction can be traded at high enough prices in the carbon offset markets, then the systems will be profitable and sustainable. Newly established China's domestic carbon offset market could provide this possibility, but more government support is needed. In addition, this study shows that scale economies make the digester adoption relatively more profitable for larger farms than smaller ones.     

Assessing local planning capacity to promote environmentally sustainable residential development

Smart growth and sustainability planning have, in recent years, become central issues in planning discourse. Scholars have argued that planning capacity at the local government level is critical for smart growth planning, and that planners have a fundamental role to play in advancing local and regional sustainability. In this paper, we investigate the extent to which local planning capacity enables communities to promote more sustainable, smart growth residential development. Based on a 2013 survey of 38 county and 53 municipal governments in the state of Wisconsin, USA, this study finds that the majority of the sample communities have permitted residential developments characterized as transit-oriented, New Urbanist, mixed use, infill developments, or conservation subdivisions as alternatives to low-density, automobile-dependent conventional developments. The study also finds that jurisdictions with higher planning capacities are more likely to overcome significant barriers to more sustainable residential development.     

Traps in and of our minds: relationships between human logic,dialectical traps and social-ecological traps

Social-ecological traps are theorized to be present when human actions affect feedbacks and drivers in social-ecological systems, which, in turn, lead to regime shifts that may alter ecosystem capacity to generate services on which human wellbeing depends, and this, in turn, triggers societal responses, where actors and institutions interact with ecological dynamics and unwittingly lock development into a vulnerable pathway. The key dynamic in this theorization seems to be that human action often predicates or initiates the series of cascading affects that determine the presence of, and, perhaps, the effectiveness of, social-ecological traps. However, what drives human action in this context? What logic, assumptions, decisions, world views, and other processes are implicated in this configuration? This paper first briefly reviews ecological identity and the problems of anthropocentricism, human exceptionalism, and human exemptionalism and introduces the term ecological disenfranchisement. Building upon this, the author invokes Horn’s logic and dialectical traps as a lens for understanding human roles and the prevalence of issues with ecological identities, within social ecological traps. Drilling further down, the paper illustrates these traps with short vignettes, in each case, attempting to link the human logical traps with larger system dynamics. Finally, the author proposes a chain of reasoning to serve as an example of how the presence of human logic traps (or entrapment) in a number of different spheres has an impact upon the larger system, and, perhaps, even predicts entrapment of the larger system. Future efforts to either understand social-ecological traps or navigate away or out of them must first take stock of the human logical traps that actors within the systems are influenced by, and that influence the large system(s).This paper argues that failing to account for human traps within will render most efforts to avoid or escape social-ecological traps futile.     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

Partial characterization of the exopolysaccharide from Oscillatoria trichoides Szafer and the role of released polysaccharide in sequestration of Cr6+

The structural investigation and the chromium adsorptive potential of an exopolysaccharide (EPS) released during the growth of an indigenous cyanobacterium, Oscillatoria trichoides Szafer, were investigated in a laboratory‐scale study. The results showed that, of the total EPS produced, 410.53 milligrams/gram (mg g^?1) were released polysaccharides (RPS) and 11.36 mg g^?1 were capsular polysaccharides (CPS). The sorption of hexavalent chromium (Cr⁶⁺) by the RPS achieved a maximum amount of metal removal (q_max) value of 76.92 mg g^?1 of polysaccharide dry weight. The highest coefficient of determination (0.9742) for the Langmuir adsorption model indicates best fitness of the model in explaining the sorption as a unilayer process. Equilibrium studies indicated that 30 to 40 milligrams per liter initial chromium concentration and a pH of 2 were optimal for biosorption of chromium by the RPS. Scanning electron microscopy with energy‐dispersive X‐ray spectroscopy analysis of Cr⁶⁺‐treated RPS showed the presence of 3.76% bound chromium. Compositional analysis of the EPS showed the presence of carbohydrates, proteins, pyruvic acid, and hexosamines. High‐performance liquid chromatography analysis demonstrated the presence of hexoses, as neutral sugars and glucuronic acid as an acidic sugar. The presence of carboxylic groups was also detected by infrared spectroscopy. The presence of these chemical constituents may serve as binding sites for the metal ions; therefore, the RPS of this species appears to be a promising biosorbent for Cr⁶⁺.     

Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

The objective of this work was to improve the impact and thermal properties of polylactic acid (PLA)-based biocomposite by appropriate application of cellulosic fiber and a bioelastomer. Biocomposites formulations with fiber contents of up to 20% in combination with a bioelastomer were extrusion-compounded in a twin-screw extruder followed by molding in an injection molding system. Fibers used in the formulations included three types of cellulosic fiber; namely, raw fiber from oat hull biomass (RF), hydrolysis byproduct (ATF) which was the solid fraction obtained from an acid-catalyzed hydrolysis of RF, and delignified fibers (AD30, AD65, AD100) which were the products of delignification of ATF. Formulated biocomposites were characterized for thermal (glass transition and melting temperatures, and enthalpy of melting) and physico-mechanical (tensile and bending strengths, stiffness, impact energy, and water absorption) properties. Among all types of biofibers, RF resulted in poor properties in the biocomposites due to the high hemicellulose content in the structure. On the other hand, the ratio of lignin to cellulose (in the absence of hemicellulose) in the modified fibers did not significantly affect the physico-mechanical and thermal properties of the biocomposites. The elastomer applied in the formulations improved the impact energy, thermal properties, and elongation at break of the composites. However, it adversely affected the strength and water resistance of biocomposites, especially in the presence of hemicellulose. The results indicated that, depending on the application, a wide range of PLA green composites with different physico-mechanical properties can be achieved.