Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

Pilot‐scale demonstration of in situ capping of PCB‐containing sediments in the lower Grasse River

A fish‐consumption advisory is currently in effect in a seven‐mile stretch of the Grasse River in Massena, New York, due to elevated levels of PCBs in fish tissue. One remedial approach that is being evaluated to reduce the PCB levels in fish from the river is in situ capping. An in‐river pilot study was conducted in the summer of 2001 to assess the feasibility of capping PCB‐containing sediments of the river. The study consisted of the construction of a subaqueous cap in a seven‐acre portion of the river using various combinations of capping materials and placement techniques. Optimal results were achieved with a 1:1 sand/topsoil mix released from a clamshell bucket either just above or several feet below the water surface. A longer‐term monitoring program of the capped area commenced in 2002. Results of this monitoring indicated: 1) the in‐place cap has remained intact since installation; 2) no evidence of PCB migration into and through the cap; 3) groundwater advection through the cap is not an important PCB transport mechanism; and 4) macroinvertebrate colonization of the in‐place cap is continuing. Additional follow‐up monitoring in the spring of 2003 indicated that a significant portion of the cap and, in some cases, the underlying sediments had been disturbed in the period following the conclusion of the 2002 monitoring work. An analysis of river conditions in the spring of 2003 indicated that a significant ice jam had formed in the river directly over the capping pilot study area, and that the resulting increase in river velocities and turbulence in the area resulted in the movement of both cap materials and the underlying sediments. The pilot cap was not designed to address ice jam–related forces on the cap, as the occurrence of ice jams in this section of the river had not been known prior to the observations conducted in the spring of 2003. These findings will preclude implementation of the longer‐term monitoring program that had been envisioned for the pilot study. The data collected immediately after cap construction in 2001 and through the first year of monitoring in 2002 serve as the basis for the conclusions presented in this article. It should be recognized that, based on the observation made in the spring of 2003, some of these conclusions are no longer valid for the pilot study area.The occurrence of ice jams in the lower Grasse River and their importance on sediments and PCBs within the system are currently under investigation. © 2003 Wiley Periodicals, Inc.     

Local Environmental Investments and Sustainable Development: the evaluation of environmental projects in Scotland supported by the European Agriculture Guidance and Guarantee Fund

In the UK for the period 1994-99, a broad range of environmental projects were given financial support through the European Agriculture Guidance and Guarantee Fund under the Objective 1 and Objective 5b programmes. This paper is concerned with the ex-post evaluation of these projects set within a Sustainable Development framework. The aim was to identify project types or characteristics that offered the greatest return on investment. A classification of six broad project types was adopted. The evaluation revealed that there were significant differences between individual projects with respect to the type and scale, and temporal and social distribution of the benefits they delivered. In particular, as well as delivering environmental and economic benefits, many projects made a significant contribution to the development of human and social capital. The paper concludes that it is possible to improve the basis for future project selection in order to maximise the returns on environmental investments in the context of sustainable development.     

An Application of a Modified Ecological Footprint Method and Structural Path Analysis in a Comparative Institutional Study

This paper presents an application of a modified ecological footprint method, using a regional, disturbance-based approach. In contrast to conventional institutional ecological footprint calculations, energy and land use resulting from all upstream production processes are explored by employing an input-output framework. Ecological footprints are calculated for two research institutions: the School of Physics (SoP) at the University of Sydney, and the Sustainable Ecosystems (CSE) Department of the Commonwealth Scientific and Industrial Research Organisation. These are broken down further in terms of land disturbance and greenhouse gas emissions, and as a function of production layer. To enable the use of the results in policy formulation, the ecological footprints are decomposed into detailed contributing paths, which are ranked according to their importance, using structural path analysis. The paper demonstrates that a considerable proportion of impacts occur upstream in industrial production. Thus a significant result of the study is the weight of obscure paths in the total footprints and, therefore, the importance of conducting an holistic assessment in order to ensure all upstream contributions are captured in the final impact of the institution.