Efforts to Reduce Mortality to Hydroelectric Turbine-Passed Fish: Locating and Quantifying Damaging Shear Stresses

Severe fluid forces are believed to be a source of injury and mortality to fish that pass through hydroelectric turbines. A process is described by which laboratory bioassays, computational fluid dynamics models, and field studies can be integrated to evaluate the significance of fluid shear stresses that occur in a turbine. Areas containing potentially lethal shear stresses were identified near the stay vanes and wicket gates, runner, and in the draft tube of a large Kaplan turbine. However, under typical operating conditions, computational models estimated that these dangerous areas comprise less than 2% of the flow path through the modeled turbine. The predicted volumes of the damaging shear stress zones did not correlate well with observed fish mortality at a field installation of this turbine, which ranged from less than 1% to nearly 12%. Possible reasons for the poor correlation are discussed. Computational modeling is necessary to develop an understanding of the role of particular fish injury mechanisms, to compare their effects with those of other sources of injury, and to minimize the trial and error previously needed to mitigate those effects. The process we describe is being used to modify the design of hydroelectric turbines to improve fish passage survival.     

Effects of Habitat Disturbance from Residential Development on Breeding Bird Communities in Riparian Corridors

This study assessed the relationship among land use, riparian vegetation, and avian populations at two spatial scales. Our objective was to compare the vegetated habitat in riparian corridors with breeding bird guilds in eight Rhode Island subwatersheds along a range of increasing residential land use. Riparian habitats were characterized with fine-scale techniques (used field transects to measure riparian vegetation structure and plant species richness) at the reach spatial scale, and with coarse-scale landscape techniques (a Geographic Information System to document land-cover attributes) at the subwatershed scale. Bird surveys were conducted in the riparian zone, and the observed bird species were separated into guilds based on tolerance to human disturbance, habitat preference, foraging type, and diet preference. Bird guilds were correlated with riparian vegetation metrics, percent impervious surface, and percent residential land use, revealing patterns of breeding bird distribution. The number of intolerant species predominated below 12% residential development and 3% impervious surface, whereas tolerant species predominated above these levels. Habitat guilds of edge, forest, and wetland bird species correlated with riparian vegetation. This study showed that the application of avian guilds at both stream reach and subwatershed scales offers a comprehensive assessment of effects from disturbed habitat, but that the subwatershed scale is a more efficient method of evaluation for environmental management.     

Bench-scale testing of a novel soil PFAS treatment train for informed remedial planning and decision-making

Bench-scale batch tests were conducted to assess the potential applicability of a combined separation/concentration/destruction treatment train to address soils and sediments impacted by per- and polyfluoroalkyl substances (PFAS) contamination at Schriever Space Force Base with historic aqueous film-forming foam (AFFF). Specifically, a novel treatment train coupling soil washing (for treatment of impacted soil/sediment) with foam fractionation (for treatment of the wash water [WW] generated during soil washing) and electrochemical oxidation (ECO, for treatment of the foam fractionate generated during foam fractionation) was evaluated at the bench scale using site-specific materials. Results presented herein show that the AFFF-impacted sandy soils with low organic content were amenable to treatment via soil washing. However, the removal of hydrophobic PFAS, such as perfluorooctanesulfonic acid (PFOS), from the organic-rich sediments was challenging. Results from batch desorption experiments were within a factor of 2 of those generated by soil washing bench studies, suggesting that simple batch tests can potentially be used to reasonably predict the treatment efficacy of soil washing. Long-chained perfluoroalkyl acids (PFAAs) within the WW were removed more effectively in the foam fractionation studies as compared to short-chain PFAAs. Addition of a surfactant, such as cetrimonium bromide (CTAB), enhanced foaming but only marginally improved the treatment of short-chained PFAAs and in some cases inhibited PFOS removal. ECO reduced PFAS concentrations in the foam fractionate generated during foam fractionation by several orders of magnitude. However, generation of unwanted byproducts may warrant further treatment and/or disposal. Overall, results from this study provide a novel data set highlighting the site-dependent nature of these PFAS remedial technologies and how simple, low-cost bench tests can be reliably leveraged for informed decision-making during PFAS remedial planning.     

Influences of Climatic Change on Some Ecological Processes of an Insect Outbreak System in Canada's Boreal Forests and the Implications for Biodiversity

Insect outbreaks are a major disturbance factor in Canadian forests. If global warming occurs, the disturbance patterns caused by insects may change substantially, especially for those insects whose distributions depend largely on climate. In addition, the likelihood of wildfire often increases after insect attack, so the unpredictability of future insect disturbance patterns adds to the general uncertainty of fire regimes. The rates of processes fundamental to energy, nutrient, and biogeochemical cycling are also affected by insect disturbance, and through these effects, potential changes in disturbance patterns indirectly influence biodiversity. A process-level perspective is advanced to describe how the major insect outbreak system in Canadian forests, that of the spruce budworm (Choristoneura fumiferana Clem. [Lepidoptera: Tortricidae]), might react to global warming. The resulting scenarios highlight the possible importance of natural selection, extreme weather, phenological relationships, complex feedbacks, historical conditions, and threshold behavior. That global warming already seems to be affecting the lifecycles of some insects points to the timeliness of this discussion. Some implications of this process-level perspective for managing the effects of global warming on biodiversity are discussed. The value of process-level understanding and high-resolution, long-term monitoring in attacking such problems is emphasized. It is argued that a species-level, preservationist approach may have unwanted side-effects, be cost-ineffective, and ecologically unsustainable.     

Opportunities for redistributed manufacturing and digital intelligence as enablers of a circular economy

The linear production of consumer goods is characterised by mass manufacture by multinational enterprises and globally dispersed supply chains. The current centralised model has created a distance between the manufacturer and end user, limiting the opportunity for intelligent circular approaches for production and consumption. Through a mixed method approach, opportunities of circularity are explored for the consumer goods sector. The study presents four lenses to analyse three enterprises through a multi-case study approach to explore the potential of digital intelligence and redistributed manufacturing (RDM) as enablers of circular business models. In addition, the study examines whether Discrete Event Simulation can be used to evaluate the circular scenarios identified through quantifying flows of material that determine traditional economic value (cost/tonne). The mixed method approach demonstrates that, a qualitative systemic analysis can reveal opportunities for circularity, gained through implementing ‘digital intelligence’ and distributed models of production and consumption. Furthermore, simulations can provide a quantified evaluation on the effects of introducing circular activities across a supply chain.     

Assessment of Flood Losses with Household Responses: Agent-Based Simulation in an Urban Catchment Area

Densely populated coastal urban areas are often exposed to multiple hazards, in particular floods and storms. Flood defenses and other engineering measures contribute to the mitigation of flood hazards, but a holistic approach to flood risk management should consider other interventions from the human side, including warning information, adaptive behavior, people/property evacuation, and the multilateral relief in local communities. There are few simulation approaches to consider these factors, and these typically focus on collective human actions. This paper presents an agent-based model that simulates flood response preferences and actions taken within individual households to reduce flood losses. The model implements a human response framework in which agents assess different flood scenarios according to warning information and decide whether and how much they invest in response measures to reduce potential inundation damages. A case study has been carried out in the Ng Tung River basin, an urbanized watershed in northern Hong Kong. Adopting a digital elevation model (DEM) as the modeling environment and a building map of household locations in the case area, the model considers the characteristics of households and the flood response behavior of their occupants. We found that property value, warning information, and storm conditions all influence household losses, with downstream and high density areas being particularly vulnerable. Results further indicate (i) that a flood warning system, which provides timely, accurate, and broad coverage rainstorm warning, can reduce flood losses by 30–40%; and (ii) to reduce losses, it is more effective and cheaper to invest early in response measures than late actions. This dynamic agent-based modeling approach is an innovative attempt to quantify and model the role of human responses in flood loss assessments. The model is demonstrated being useful for analyzing household scale flood losses and responses and it has the potential to contribute to flood emergency planning resource allocation in pluvial flood incidents.     

Competitive adsorption and desorption of arsenate,vanadate, and molybdate onto the low-cost adsorbent materials alum water treatment sludge and bauxite

When low-cost adsorbents are being used to remove contaminant ions (e.g. arsenate, vanadate, and molybdate) from wastewater, competitive adsorption/desorption are central processes determining their removal efficiency. Competitive adsorption of As, V, and Mo was investigated using equimolar oxyanion concentrations in single, binary, and tertiary combinations in adsorption isotherm and pH envelope studies while desorption of previously adsorbed oxyanions was examined in solutions containing single and binary oxyanion combinations. The low-cost adsorbent materials used were alum water treatment sludge (amorphous hydroxy-Al) and bauxite ore (crystalline Al oxides). Adsorption isotherm and pH envelope studies showed that Mo had only a small effect in decreasing adsorption of As and V but V and As had substantial and similar effects in reducing adsorption of the other. As had a greater effect than V in reducing adsorption of Mo and it was concluded that the affinity of oxyanions for the surfaces of water treatment sludge and bauxite followed the order As > V >> Mo. In 0.3 M NaCl electrolyte, desorption of previously adsorbed oxyanions amounted to 0.3–3.4% for V and As, and 11–20% for Mo. As had approximately four times greater effect than Mo in increasing desorption of V while V had about three times the effect of Mo in increasing desorption of As. Thus, the order of oxyanions in inducing desorption of the other oxyanions (i.e. As on V and As) was the same as that for adsorption selectivity: As > V >> Mo. Water treatment sludge was a more effective adsorbent than bauxite because it had a greater adsorption capacity for all three anions and, in addition, they were held more strongly so desorption in the background electrolyte was proportionately less. It was concluded that at similar molar concentrations, arsenate would tend to reduce adsorption of vanadate as well as displace vanadate already held on adsorbent surfaces while both anions will compete effectively with molybdate. The limiting factor for simultaneous removal of As, V, and Mo from multielement solutions by adsorption will therefore be the removal of Mo.     

Mediterranean forests,land use and climate change: a social-ecological perspective

Regional Environmental Change - Mediterranean forests are found in the Mediterranean basin, California, the South African Cape Province, South and southwestern Australia and parts of Central Chile....     

Corporations,Consumerism and Culpability: Sustainability in the British Press

Sustainability and sustainable development are prominent themes in international policy-making, corporate PR, news-media and academic scholarship. Its definitions are contested, however sustainability is associated with a three-pillar focus on economic development, environmental conservation and social justice, most recently espoused in the adoption of the UN Sustainable Development Goals in 2015. In spite of its common usage, there is little research about how sustainability is represented and refracted in public discourse in different national contexts. We examine British national press coverage of sustainability and sustainable development in 2015 in a cross-market sample of national newspapers. Our findings show that key international policy events and environmental and social justice frames are peripheral, while neoliberalism and neoliberal environmentalism vis-à-vis the promotion of technocratic solutions, corporate social responsibility and “sustainable” consumerism are the predominant frames through which the British news-media reports sustainability. This holds regardless of newspaper quality and ideological orientation.     

New perspectives on horizontal to vertical well ratios for site cleanup

Directional drilling has been used for a variety of purposes, including utilities, dewatering, and remedial activities. Using this method for site cleanup versus traditional vertical extraction wells needs to be considered based upon today's remedial challenges. Traditionally, it has been stated that a single horizontal well can substitute for up to 11 vertical wells. This “rule” is arbitrary, since length and depth of the plume, surface access, and hydrogeological conditions must be considered. A better way to evaluate the cost‐benefit of a horizontal versus vertical well system is a predicted zone of influence using a mathematical and hydrogeological approach, as described herein.