Report: anaerobic digestion of a sulphate-rich high-strength landfill leachate: the effect of differential dosing with FeCl3.

The effect of different dose concentrations of FeCl3 on the performance of a mesophilic anaerobic digester treating a highly alkaline, high-strength and sulphate-rich landfill leachate was tested. The results indicated that sulphate reduction was the predominant reaction and methanogenic processes were entirely inhibited in the reactor without FeCl3 addition. Adding FeCl3 into the reactor restored some methanogenic activity and also improved the rates of sulphate reduction. A combination of sulphate reduction and methanogenic activity resulted in up to 75% chemical oxygen demand (COD) removal and 85% sulphate removal. Sulphate reduction remained the principle mechanism by which COD removal took place with a methane yield of only between 0.14 and 0.18 m3 CH4 kg(-1) COD removed being achieved. The process was, however, stable and offered advantages for the further treatment or conveyance of the anaerobically treated leachate.     

Little by little,inch by inch: Project expansion assessments in the Papua New Guinea mining industry

Social impact assessment (SIA) has traditionally been practiced as an ex-ante predictive tool in the context of regulatory approval by government agencies. This model of SIA developed by Burdge and others is based on ‘greenfields’ development, of a new project going in to areas where there are no, or relatively few, similar types of development. The International Principles of SIA signalled a conceptual shift in the practice of SIA where greater emphasis is placed on the assessment and management of social issues across the life-cycle of developments. In addition forms of cumulative impact assessment have been developed for contexts where more than one project is likely to impact on populations or communities. With these changes to the traditional models of impact assessment there is a need to clarify how and when dedicated phases of ‘assessment’ might be undertaken over the life-cycle of a development. In the context of the mining industry, SIAs are increasingly required by governments for incremental increases in the size or impact of these operations. This paper reviews the development and application of Project Expansion Assessments (PEAs) for two large-scale mining operations in Papua New Guinea. It argues that a different set of assumptions need to underlie the model of IA for such assessments, with more emphasis on trajectories rather than baselines, a critical evaluation and attribution of effects, and the incorporation of adaptive management tools into the process.     

Alignment of the Lumbar Vertebrae in a Driving Posture

The purpose of this study was to define the anatomical arrangement of the lumbar spine in the mid-body sagittal plane of a human volunteer while in three postures: a driving posture; full flexion; and full extension. Radiographic images of the lumbar spine were made of a 33-year old 50th percentile male subject seated in a comfortable driving posture. Additional radiographs were made of the lumbar spine while the subject was postured in full voluntary flexion, and full voluntary extension. Anterior and posterior mid-sagittal vertebral endplate positions were plotted on an x-y coordinate system for each posture. Anterior and posterior disk thicknesses, and the positions of the centers of each vertebra were numerically determined using information from the plots. Disk thicknesses were then graphed and comparisons made for each posture. The arrangements of the centers of vertebrae were graphed and compared for the three different postures. The arrangement of the lumbar vertebrae tended toward that of full voluntary flexion while the subject was in a normal driving posture. Anterior disk thickness was a sensitive indicator of posture, while posterior disk thickness was not. While in a driving posture, the lower back approximated a straight-line that was nearly parallel to the seat back axis. The observations support those of an earlier study. Since soft tissue spinal elements can only be damaged by applying tensile forces in excess of their tolerance, the anterior elements of the lumbar spine would not be directly threatened in low velocity frontal collisions, since anterior elements would be in relative compression. Tension injury to the anterior structures as a result of a rear-end collision would first require reversing the preimpact conditions imposed by the normal driving posture. Tension injury to the posterior spinal elements resulting from low velocity rear-end collisions would be unlikely since axial compression loading would also diminish tension stress in posterior soft tissue structures. Any compression injury to posterior elements resulting from rear-end collisions would first require reversing the pre-impact conditions imposed by the normal driving posture.     

The ‘new’ economics of iron and steel

The author commences his analysis of the iron and steel industry by examining the historical background of the industry, and discusses its importance for the world economy. He examines the implications for the world industry of the successful development of the steel industry in Japan, and traces the evolution of a commodity cartel in the iron ore market, analysing the price levels of the commodity in the ‘free’ and ‘controlled’ markets. Following a discussion of the role of energy and coking coal supplies in the industry, the author examines the evolution of this industry in the less developed countries, with particular reference to the role of technology in the industry's development. He concludes that there have been important structural changes in the world industry, embraced by the concept of ‘partial demise’.     

A kinetic study of anaerobic digestion of olive mill wastewater at mesophilic and thermophilic temperatures

The kinetics of the anaerobic digestion of olive mill wastewater (OMW) was studied in the mesophilic and thermophilic ranges of temperature. Two completely mixed continuous flow bioreactors operating at 35 degrees C and 55 degrees C and with an average biomass concentration of 5.45 g VSS litre(-1) were used. The thermophilic reactor worked satisfactorily between hydraulic retention times (HRT) of 10 to 40 days, removing between 94.6 and 84.4% of the initial chemical oxygen demand (COD). In contrast, the mesophilic reactor showed a marked decrease in substrate utilization and methane production at a HRT of 10 days. TVFA levels and the TVFA/alkalinity ratio were higher and close to the suggested limits for digester failure. The yield coefficient for methane production (1 CH(4) STP g(-1) COD(added)) was 28% higher in the thermophilic process than in the mesophilic one. Macroenergetic parameters, calculated using Guiot's kinetic model, gave yield coefficients for the biomass (Y) of 0.18 (mesophilic) and 0.06 g VSS g(-1) COD (thermophilic) and specific rates of substrate uptake for cell maintenance (m) of 0.12 (mesophilic) and 0.27 g COD g(-1) VSS.day(-1) (thermophilic). The experimental results showed the rate of substrate uptake (R(s); g COD g(-1) VSS.day(-1)), correlated with the concentration of biodegradable substrate (S(b); g COD litre(-1)), through an equation of the Michaelis-Menten type for the two temperatures used.     

Biphasic production of hydrogen and methane from waste lactose in cyclic-batch reactors

The biphasic production of the energy gases hydrogen and methane was possible in a fed batch culture resulting in a volumetric mix of approximately 20% H₂ and 80% CH₄ and an energy conversion efficiency of 95%, based on the measured Chemical Oxygen Demand and theoretical calculations assuming that the substrate (a dairy waste permeate) was lactose. Gas production showed a rapid initial phase over 0–20 h in which the composition was up to 50% hydrogen with the balance mainly carbon dioxide. This was accompanied by the accumulation of volatile fatty acids (VFA) in which butyric was predominant. A slower second phase of gas production produced a mixture of methane and carbon dioxide with a reduction in the accumulated acids. The duration of this second phase depended on the initial load applied to the reactor, and in the experiments carried out lasted between 6 and 12 days. Where the applied initial load led to an acid accumulation such that the pH fell below 5.5, the second phase of gas production was inhibited. Where pH control was exerted to prevent the pH dropping below 6.5, ethanol accumulated alongside VFA as a first phase product, with the gas comprised entirely of carbon dioxide. Despite the excellent energy conversion and the production of biogas fuel elements matching those for hythane (a mixture of hydrogen and methane, with improved combustion characteristics), the overall process loading was considered too low for efficient volumetric conversion of the feedstock to energy. The concept could be further developed based on high rate reactor systems with granular or immobilised biomass either as a single tank biphasic system or in a split tank two phase production process.     

Latitudinal symbiont zonation in <Emphasis Type="Italic">Stylophora pistillata</Emphasis> from southeast Africa

Studies on latitudinal gradients in Symbiodinium diversity on scleractinian corals are largely restricted to warm-water low latitude locations, and it appears that there is a shift in symbiont distributions with increasing latitude. The Symbiodinium assemblages of high latitude coral communities have largely been undocumented despite occupying an important transitional zone between tropical and temperate regions. Using a combination of the internal transcribed spacer region 2 (ITS2) and denaturing gradient gel electrophoresis (DGGE), we assessed the cladal and subcladal variability of Symbiodinium in the widely distributed species Stylophora pistillata along a latitudinal transect in southeast African waters which extended into high latitude locations. All colonies examined belonged to clade C. Six unique ITS2-DGGE banding profiles (designated C_spa to C_spf) were observed, which showed a latitudinal distribution from north to south, most likely a result of a gradient in water temperature and irradiance driven by riverine input in the southern regions. Sequence analysis revealed that all sequences except one did not match previously identified clade C sub-types, probably due to the lack of regional information in the Western Indian Ocean when compared to the Caribbean and Pacific. This study further supports the applicability of ITS2-DGGE in studies on Symbiodinium diversity, and highlights that potentially ecologically informative biogeographic patterns may be overlooked when only cladal designations are employed.     

Digital technology and human development: A charter for nature conservation

The application of digital technology in conservation holds much potential for advancing the understanding of, and facilitating interaction with, the natural world. In other sectors, digital technology has long been used to engage communities and share information. Human development—which holds parallels with the nature conservation sector—has seen a proliferation of innovation in technological development. Throughout this Perspective, we consider what nature conservation can learn from the introduction of digital technology in human development. From this, we derive a charter to be used before and throughout project development, in order to help reduce replication and failure of digital innovation in nature conservation projects. We argue that the proposed charter will promote collaboration with the development of digital tools and ensure that nature conservation projects progress appropriately with the development of new digital technologies.     

Persistent organic pollutants (PCB, DDT, HCH, HCB & BDE) in eels (Anguilla anguilla) in Scotland: Current levels and temporal trends

Eels are an ideal biomonitor for persistent organic pollutants (POPs) because of their high lipid content, longevity and tendency to remain within a defined range during their freshwater life phase. This study investigated concentrations of POPs in eels (Anguilla anguilla) from 30 sites across Scotland, including polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (BDEs), DDT (and metabolites), hexachlorocyclohexanes (α, β, γ-HCH), hexachlorobenzene (HCB), hexachlorobutadiene (HCBD) and pentachlorobenzene. Despite its EU-wide ban ∼30 years ago, DDT and its derivatives were detected in almost all samples. PCB 153 and 138 were the most widely detected PCB congeners, while BDE 47 was the dominant BDE. Pentachlorobenzene was not detected, while HCBD was detected once only. α-HCH, β-HCH and HCB concentrations were very low (generally <3 μg/kg or below detection). When compared with 1986 and 1995 data, the results revealed considerable decreases in p,p′-DDE concentrations. More drastic reductions were evident for γ-HCH, reflecting the tightening restrictions on pesticide use imposed over the previous decades.