Dietary uptake of polybrominated diphenyl ethers (PBDEs), occurrence and profiles, in aquacultured turbots (Psetta maxima) from Galicia, Spain

Polybromodiphenyl ethers (PBDEs) are one of the many toxic chemicals present in the environment and in the food we eat every day, being fish one of the main sources of persistent organic pollutants in our diet; like other lipid-related contaminants, they are of concern since they can bioaccumulate and biomagnify through the trophic chain. We published a study focused on the dietary uptake of dioxins and furans (PCDD/Fs) and dioxin-like polychlorobiphenyls (dl-PCBs) in a set of samples of Spanish farmed turbot (Blanco et al., 2007). In the present paper, we extend the study to PBDEs to provide more information about the uptake and transfer from feed to fish of halogenated contaminants. PBDEs in the feeds (2.35-4.76 ng g(-1)) were reflected in turbot fillets (0.54-2.05 ng g(-1)): predominant congeners were tetra-BDE 47, penta-BDEs 99 and 100. It is remarkable that tetra-BDE 49, accounting for only 2% in the feed, contributed to 15% of total PBDEs in turbot fillets. Dietary net accumulation values, 30-45%, showed that tri-, tetra-, penta- and hexa-BDEs were as efficiently transferred into turbot as dl-PCBs and tetra- and penta-chlorinated PCDD/Fs. Lipid-normalized biomagnification factors relating concentration in fish and in feed, BMFs>1 were obtained, except for BDE 209. BDE 49 accumulation, 90%, was possibly contributed by metabolism of higher brominated BDEs. Implication in aquaculture management is a need for uncontaminated fish feed to offer safe products.     

Impact of increased collection rates and the use of commingled collection systems on the quality of recovered paper. Part 1: increased collection rates

The recovery and utilization of recovered paper have increased over past decades all over the world due to economic, environmental, and social issues. However, it is well known that an extended recovered paper collection is detrimental to its quality, either by the exploitation of lower quality sources such as households, or the spreading of commingled systems instead of selective collection systems. The influence of these two factors was assessed by analyzing the quality of different recovered paper grades used as raw material in a mill located in Madrid (Spain) producing newsprint and light weight coated paper from recovered paper. Part 1 of the paper deals with the impact of increased collection rates on the quality of recovered paper and Part 2 with the use of commingled collection systems. Results of Part 1 show that increased collection rates have a large impact on the quality of the recovered paper. The quality, measured as total unusable material and moisture contents, had deteriorated very rapidly in only 4 years (2005–2008) as a consequence of increased collection rates. Collection rates increased in Spain from 58.5% to 68.6% during this period, resulting in more than 50% increase of total unusable material and 25% of moisture content. The downgrading of the quality of recovered paper is one of the major threats for extending the current limits of paper recycling. Therefore, future challenge is to increase its availability but maintaining its quality.     

Anatomic correlates of ultrasonographic prenatal diagnosis

In utero sonographic diagnoses from forty-five malformed infants were correlated with their autopsy findings. Fifty-two malformations were diagnosed prenatally in 42 of the patients but 90 additional malformations were not. Nine sonographically diagnosed abnormalities were not confirmed at autopsy. Factors compromising sonographic diagnosis included: limited examinations, small fetal size, timing of examination, oligohydramnios, fetal position, nature of the malformation and unfamiliarity of the ultrasonographer with specific malformation syndromes. In vitro ultrasonography is an invaluable tool of diagnosing congenital malformations but has limitations.     

Greenhouse gas emissions from the waste sector in Argentina in business-as-usual and mitigation scenarios

The objective of this work was the application of 2006 Intergovernmental Panel on Climate Change (IPCC) Guidelines for the estimation of methane and nitrous oxide emissions from the waste sector in Argentina as a preliminary exercise for greenhouse gas (GHG) inventory development and to compare with previous inventories based on 1996 IPCC Guidelines. Emissions projections to 2030 were evaluated under two scenarios—business as usual (BAU), and mitigation—and the calculations were done by using the ad hoc developed IPCC software. According to local activity data, in the business-as-usual scenario, methane emissions from solid waste disposal will increase by 73% by 2030 with respect to the emissions of year 2000. In the mitigation scenario, based on the recorded trend of methane captured in landfills, a decrease of 50% from the BAU scenario should be achieved by 2030. In the BAU scenario, GHG emissions from domestic wastewater will increase 63% from 2000 to 2030. Methane emissions from industrial wastewater, calculated from activity data of dairy, swine, slaughterhouse, citric, sugar, and wine sectors, will increase by 58% from 2000 to 2030 while methane emissions from domestic will increase 74% in the same period. Results show that GHG emissions calculated from 2006 IPCC Guidelines resulted in lower levels than those reported in previous national inventories for solid waste disposal and domestic wastewater categories, while levels were 18% higher for industrial wastewater.

Implications: The implementation of the 2006 IPCC Guidelines for National Greenhouse Inventories is now considering by the UNFCCC for non-Annex I countries in order to enhance the compilation of inventories based on comparable good practice methods. This work constitutes the first GHG emissions estimation from the waste sector of Argentina applying the 2006 IPCC Guidelines and the ad doc developed software. It will contribute to identifying the main differences between the models applied in the estimation of methane emissions on the key categories of waste emission sources and to comparing results with previous inventories based on 1996 IPCC Guidelines.     

Extent and variation of sound enhancement inside burrows of the frog Eupsophus emiliopugini (Leptodactylidae)

Variation of the amplification effect of burrows of the leptodactylid frog Eupsophus emiliopugini on conspecific calls generated externally was investigated. Advertisement calls broadcast through a loudspeaker placed in the vicinity of a burrow were monitored with small microphones positioned inside and outside the cavity. For 150 presentations of calls of 15 individuals in 12 burrows, 134 were amplified and 16 were attenuated (range –6–13 dB). The fundamental resonant frequency of burrows, measured with broadcast noise and pure tones, averaged 814 Hz (range 302–1361 Hz) and covaried with burrow length. The dominant frequency of the calls of burrow occupants (average 1062 Hz, range 636–1459 Hz) was not correlated with the fundamental resonant frequency of these cavities. In burrows with low resonant frequencies, externally broadcast calls with high dominant frequencies were attenuated, or amplified to a lower extent than calls with lower dominant frequencies. The dominant frequencies of the calls experienced shifts towards the burrows’ fundamental resonant frequencies. The amplification of calls inside burrows of E. emiliopugini exhibits manifest variability, with considerable potential for facilitating acoustic interactions in this species. Received: 18 July 1999 / Received in revised form: 19 July 1999 / Accepted: 25 July 1999     

Soil-to-plant transfer factors for natural radionuclides and stable elements in a Mediterranean area

The transfer factors (TF) for natural uranium isotopes (238U and 234U), thorium isotopes (232Th, 230Th and 228Th), and 226Ra were obtained in plant samples (grass-pasture) growing in granitic and alluvial soils around a disused uranium mine located in the Extremadura region in the south-west of Spain. Affected and non-affected areas of the mine presented large differences in the activity concentrations of radionuclides of the uranium series. We also determined transfer factors for several stable elements (essential and non-essential). A set of statistical tests were applied to validate the data. The results showed that the transfer factors for both the natural radionuclides and the stable elements are independent of the two substrate types involved and also of the two areas considered in the study.     

Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Solar photocatalytic mineralization of commercial pesticides: acrinathrin

A comparative study of the degradation of commercial acrinathrin spiked in water using TiO2 photocatalysis and photolysis under sunlight was performed. Samples were analysed by liquid chromatography-diode array detector (HPLC-DAD) and gas chromatography-ion trap-mass spectrometric detector (GC-ITMS). Additional total organic carbon (TOC) analyses were carried out to evaluate the mineralisation rates. One photoproduct, 2-phenoxy benzaldehyde, was unequivocally identified and evaluated by GC-ITMS during the processes. Although acrinathrin is almost destroyed when exposed to irradiation for more than 400 h, photocatalysis with TiO2 noticeably reduced degradation to a few hours. In this case, with the additional presence of peroxydisulphate, in less than 2 h acrinathrin is completely destroyed. Mineralisation of acrinathrin, without catalyst, was only around 50% after 400 h of irradiation.     

Treatment of chlorinated solvents by TiO2 photocatalysis and photo-Fenton: influence of operating conditions in a solar pilot plant

Titanium dioxide photocatalysis (using 20 0mg l(-1) of TiO2), under aerobic and anaerobic conditions, and photo-Fenton (2 and 56 mg l(-1) iron) were applied to the treatment of different NBCS (non-biodegradable chlorinated solvents), such as dichloroethane, dichloromethane and trichloromethane dissolved in water at 50 mg l(-1). All the tests were performed in a 35-l solar pilot plant with compound parabolic collectors (CPCs) under natural illumination. The two solar treatments were compared with attention to chloride release and TOC mineralisation, as the main parameters. Photo-Fenton was found to be the more appropriate treatment for these compounds, assuming volatilisation as a drawback of photocatalytic degradation of NBCS dissolved in water. In this context, several operating parameters related to NBCS degradation, e.g., treatment time, temperature, hydrogen peroxide consumption and volatility of parent compounds are discussed. The correct choice of operating conditions can very often diminish the problem of volatilisation during treatment.