Ecosystem Impacts of Geoengineering: A Review for Developing a Science Plan

Geoengineering methods are intended to reduce climate change, which is already having demonstrable effects on ecosystem structure and functioning in some regions. Two types of geoengineering activities that have been proposed are: carbon dioxide (CO(2)) removal (CDR), which removes CO(2) from the atmosphere, and solar radiation management (SRM, or sunlight reflection methods), which reflects a small percentage of sunlight back into space to offset warming from greenhouse gases (GHGs). Current research suggests that SRM or CDR might diminish the impacts of climate change on ecosystems by reducing changes in temperature and precipitation. However, sudden cessation of SRM would exacerbate the climate effects on ecosystems, and some CDR might interfere with oceanic and terrestrial ecosystem processes. The many risks and uncertainties associated with these new kinds of purposeful perturbations to the Earth system are not well understood and require cautious and comprehensive research.     

A Sampling Protocol for Composting,Recycling, and Re-use of Municipal Solid Waste

Abstract

This article reports on development of a protocol for characterizing municipal solid waste (MSW). This protocol is similar to that recommended by the American Society for Testing and Materials but includes a distinction between pure and mixed loads of MSW. Thirteen component categories were used with a focus on material feed stock for composting, recycling, and reuse. The required number of samples was determined to achieve a 80%, 90%, and 95% statistical accuracy for characterizing MSW categories at 1% and 2% sampling error. This study found that a maximum of 25 randomly collected samples of 200 pounds will reflect each component category of mixed load MSW with at least a 95% confidence level and 2% error. This protocol was successfully tested in Monongalia County, West Virginia, to provide a “snapshot” MSW characterization during early summer.     

空气污染对儿童及其父母呼吸系统健康的影响

 根据空气污染数据对广州、武汉、兰州、重庆4城市8个点位进行了空气污染的聚类分析,并按空气污染程度进行了排序.在此基础上,分析了空气污染程度与儿童及其父母呼吸系统健康的关系.发现儿童11种患病率随空气污染程度加重而呈上升趋势.污染最重组的患病率是污染较轻组的1.71(3.95倍.污染最重组的比数比(即OR值)是污染较轻组的3.313(6.942倍.空气污染对儿童父母的呼吸系统患病率也有轻度至中度的影响.     

MEETING PUBLIC EXPECTATIONS WITH ECOLOGICAL INNOVATION IN RIPARIAN LANDSCAPES1

ABSTRACT: Appearances matter for managing riparian landscapes because the appearance of landscapes affects public willingness to accept plans and designs that improve ecological quality. Riparian landscape design and planning should respect and strategically incorporate characteristics that the public values and expects to see. Such design can be quite novel in its ecological effects, but it also should be sufficiently familiar in appearance to correspond with cultural values. This paper describes some influential cultural values for riparian landscapes and demonstrates how attention to such values supports public acceptance of ecologically innovative design in rural and urban watersheds.     

The alcohol interlock: an underutilized resource for predicting and controlling drunk drivers

This report summarizes evidence presented during the Third Annual Ignition Interlock Symposium at Vero Beach, Florida, 29 October 2002. The ignition interlock prevents a car from starting when blood alcohol concentration (BAC) is elevated. We review some of our prior work as well as introduce previously unpublished results to demonstrate the manner in which the data recorded by the alcohol ignition interlock device can serve as an advance predictor of future driving under the influence (DUI) of alcohol risks. Data used in this current report represent approximately 2,200 ignition interlock users from Alberta, Canada, and about 8,000 interlock users from Quebec, Canada; the Alberta data set contained 5.5 million breath tests and the Quebec data 18.8 million breath tests. All tests are time and date stamped and this information was used to characterize patterns of BAC and vehicle use, and the relationship between BAC elevations and DUI offenses that accumulated after the interlock was removed from the vehicles. Findings from Cox regression show that BAC elevations >.02-.04% are more potent predictors of repeat DUI (p<.0001) than even prior DUI (p<.006), usually found to be the strongest indicator of driver risk. Prior DUI obviously has no use for scaling the risk of first-time offenders. Drivers who are both multiple offenders and who have more than a few elevated interlock BAC tests are much more likely to repeat DUI. The timing and pattern of elevated BAC tests provided during the time drivers were required to use an alcohol ignition interlock device are remarkably similar on both a daily basis and an hourly basis when the interlock programs from the two provinces are compared directly. Both provinces had higher rates of elevated tests on Saturday and Sunday, and the fewest elevated tests on Tuesdays. The absolute rate of elevated tests is similar despite the two provinces adhering to different interlock lockout points (.02% Quebec;.04% Alberta). Charts tracking the Monday-Friday timing of elevated BAC tests by hour are nearly identical for both provinces. The most elevated BAC tests occurred between 7 and 9 A.M. Monday to Friday, even though most vehicle start attempts occurred much later in the day. This higher rate of elevated morning BAC likely represents drinking from the prior evening with alcohol not yet cleared from circulation; those with elevated BAC in the early morning were more likely to have a repeat offense even after accounting for prior DUI and the higher overall rate of elevated BAC tests. This is viewed as evidence of a drinking problem that will lead to impaired driving after the controlling function of the interlock is removed. Policy changes are discussed that might take better advantage of interlock information to improve the public response to drunk driving.     

Polychlorinated biphenyls in Narragansett Bay surface sediments

Polychlorinated biphenyls (PCBs) were evaluated in 41 surface sediments collected from Narragansett Bay, RI in 1997-1998. Highest concentrations of total PCBs (1760 ng/g) were in rivers at the head of the bay and the values decreased southward toward the mouth of the bay, with elevated concentrations in some of the coves. The PCB levels in approximately 43% of the samples exceeded the effects range median (ERM) guideline [Environ. Manage. 19 (1995) 81] indicating possible adverse biological effects at these stations. Principal component analysis (PCA) of the surface sediment PCBs separated the Taunton River samples from the rest of the samples. This result suggests that this river has a different PCB composition and sources than the other areas investigated. It also showed that this river has a limited influence on other bay stations as the adjacent samples downstream did not have the same chemical signature. Congener ratios derived from the PCA were useful in distinguishing stations that had different sources of PCBs than the bulk of the bay sediments. Although Aroclor 1268 and 1270 accounted for <1% of all PCB production, their major components, CB206 and CB209, account for 3-6% of the CBs in most bay samples. This may reflect more local use of these Aroclor mixtures and/or be indicative of their relative stability, compared to less chlorinated mixtures. Using linear alkyl benzenes (LABs) as a marker for sewage derived PCBs suggested that up to 95% of the PCBs at the most contaminated sites in the Seekonk, Providence, and Taunton Rivers were sewage derived. This analysis also showed that there is a high background level (167 ng/g) of PCBs in the Seekonk and Providence River, while the Taunton River had a relatively low background level (23.7 ng/g). At the furthest stations south in the Providence River, the sewage derived PCBs only accounted for 23% of the total which suggests that PCB associated with sewage particles are rapidly deposited and are therefore not the most significant source of these compounds to the lower reaches of Narragansett Bay.     

Influencing factors and a proposed evaluation methodology for predicting groundwater contamination potential from stormwater infiltration activities.

To offset the detrimental effects of urbanization on groundwater recharge, stormwater managers are focusing on infiltrating much of the runoff from a site that was generated because of development. For this to be effective, tools are required to predict the potential for contamination resulting from this infiltration for many site conditions, because infiltration should be stressed in areas where the least potential for causing groundwater contamination exists. Factors that influence contamination potential include the pollutant concentration in the runoff directed to the infiltration device and the ability of the underlying soil to remove the pollutant. The groundwater contamination potential of some pollutants, even those with high concentrations and moderate-to-high mobilities, can be reduced with proper pretreatment before infiltration. This paper presents a methodology that can be used to evaluate infiltration as an management option and introduces two different levels of models that could be used to evaluate contamination potential.     

Nonpoint source of nutrients and herbicides associated with sugarcane production and its impact on Louisiana coastal water quality

A watershed analysis of nonpoint-source pollution associated with sugarcane (Saccharum officinarum L.) production was conducted. Runoff water samples following major rainfall events from two representative sugarcane fields (SC1 and SC2) were collected and analyzed. The impact of runoff on two receiving water bodies, St. James canal (SJC) and Bayou Chevreuil (BC) in a drainage basin (Baratarian Basin), was studied. Results show that runoff flow/rainfall ratios at the SC1 were significantly higher (P < 0.0001, n = 14) than at the SC2, probably mainly due to higher sand content and higher infiltration rate of surface soil at the SC2. In runoff water samples, total suspended solids (TSS) showed a significant correlation with the concentrations of N and P. Sugarcane runoff showed a direct impact on the SJC and BC locations where seasonal variations of pollutant concentrations in the waters followed the patterns of runoff loadings. Swamp forest runoff (SFR) location showed a buffering effect of forested wetlands on water quality with the lowest measured pollutant concentrations. The ratios in total N/total P and in inorganic N/organic N in runoff waters indicated that fertilization in spring greatly contributed to the temporal increase of N loadings, especially in forms of inorganic N. Isotope signature of (15)N-nitrate in the water samples verified that the nitrate was derived from fertilizers and was consumed during transportation. Both N and P concentrations in the receiving water bodies were above the eutrophic level. During the study period, herbicide concentrations in the receiving water bodies rarely exceeded the drinking water standards.     

Karyotype,phenotype and parental origin in 19 cases of triploidy

The parental origin of triploidy in 19 cases was examined by inheritance of DNA microsatellites and by methylation patterns of SNRPN or PW71 (where parents' blood was unavailable). The fetal and placental morphology on these cases was reviewed. The phenotype of the fetuses with non-mosaic triploidy was assessed in relation to the two types described by McFadden and Kalousek. Of the diandric fetuses three of the six showed mild-to-moderate symmetrical growth retardation and the other three had growth characteristics in accordance with their gestational ages. This study would suggest the fetal triploid ‘Type 1’ definition be modified to ‘well grown to moderate symmetrical IUGR’ to allow for such variation. In the digynic fetuses (McFadden/Kalousek Type 2) there were poor growth characteristics with IUGR being more severe and asymmetrical. The diandric fetuses were as common as digynic fetuses in this series. The ratio of diandric to digynic specimens was 11:8 but if only fetal specimens (not embryos or mosaic children) were included the ratio was 6:5. Many diandric conceptions end as partial moles but later in gestation diandric fetuses may be well grown. It is proposed that there may be a survival barrier for diandric fetuses early in gestation (possibly based on the proportion of vascularised placental villi), although once this is passed the diandric fetuses are comparatively more viable and better grown than digynic fetuses. In the XXY triploid fetuses, 5/6 had hypoplastic or ambiguous external genitalia (two were recorded as of female phenotype) as has been reported previously. In these, the gonadal histology was testicular in all the diandrics but in the single digynic XXY case, sex reversal was complete with normal uterus and Fallopian tubes and the gonads were histologically ovaries. Two triploid/diploid mosaics were proven to be due to digyny. The probable cause is delayed incorporation of the second polar body into a blastomere and there was evidence of identical alleles from the same sperm being present in both diploid and triploid cells. In one of these triploid/diploid mosaics in which there was a termination of pregnancy (TOP) after prenatal karyotyping the diploid cell line had trisomy 16 which was not evident in the triploid line. This trisomy was probably of post-zygotic origin and we suggest the fetus was rescued by the prominence of the triploid line. Copyright © 2001 John Wiley & Sons, Ltd.     

Improving the extraction of tetrachloroethylene from soil columns using surfactant gradient systems

In this work, we extend the recently developed gradient approach for surfactant-enhanced remediation of dense non-aqueous phase liquid (DNAPL)-impacted sites. The goal of the gradient approach is to maximize the DNAPL solubilization capacity in swollen micelles (Type I aqueous microemulsions) while at the same time minimizing the potential for DNAPL mobilization. In this work, we introduce a modified version of the capillary/trapping curve that we refer to as the gradient curve to help interpret and/or design the gradient approach. The gradient curve presents the residual DNAPL saturation as a function of interfacial tension and microemulsion viscosity. This approach demonstrates that keeping a low viscosity of the microemulsion phase is not only important for keeping a low head loss during surfactant flooding but also to prevent oil mobilization. Eight microemulsion systems were evaluated in this research; these systems were evaluated based on their tetrachloroethylene (PCE) solubilization capacity, interfacial tension (IFT), viscosity, density, and coalescence kinetics. Two of these systems were chosen for evaluation in site-specific column tests using an increasing electrolyte gradient to produce a decreasing IFT/increasing solubilization gradient system. The column studies were conducted with media from Dover Air Force Base in Dover, DE. Both solubilized and mobilized DNAPL were quantified. During the column studies, we observed that substantial PCE was mobilized when the residual level of PCE in the column was significantly higher than the steady-state residual saturation level being approach (as predicted from the gradient curve). Four column studies were performed, three of which were used to asses the validity of the gradient curve in predicting the residual saturation after each gradient step. From these tests we observed that starting IFTs of less than 1 mN/m all produced the same mobilization potential. In the last column, we used an additional gradient step with an initial IFT above 1 mN/m to dramatically reduce the amount of PCE mobilize. Based on the good agreement between column results and projections based on the gradient curve, we propose this as a preferred method for designing gradient surfactant flushing systems.