Cu^2＋、Zn^2＋对生物脱氮系统的影响

Cu^2＋和Zn^2＋是污水处理工艺中经常遇到的金属离子。在驯化好的活性污泥系统中,研究了金属离子Cu^2＋和Zn^2＋在0～100mg／L浓度下对活性污泥生物脱氮系统的影响。试验发现Cu^2＋＞5mg／L、Zn^2＋＞30mg／L时,对硝化过程具有明显的抑制作用,在同样浓度的试验条件下cu“对硝化过程的抑制作用比Zn^2＋大。Cu^2＋≤0．5mg／L时对反硝化过程具有一定的促进作用,有助于提高TN的去除效果;Cu^2＋＞0．5mg／L时,对反硝化产生抑制作用,随着浓度的增加,TN去除率逐渐下降。Zn^2＋不影响反硝化过程,仅在大于30mg／L时,对硝化过程产生抑制作用。重金属Cu^2＋对生物脱氮系统的影响明显强于Zn^2＋。     

污泥膨胀状态下原生动物群落结构分析

系统研究了丝状菌膨胀与非丝状菌膨胀2种典型污泥状态下原生动物的群落结构特征及其演变规律。伴随丝状菌的大量增殖,原生动物总量相应减少,匍匐型纤毛虫及有壳类肉足虫数量迅速上升,占据明显的优势地位,典型原生动物为斜管虫（Chilodonella sp.）、小轮毛虫（Trochilia minuta）以及匣壳虫（Centropyxis sp.）;非丝状菌污泥膨胀对原生动物总量及种群结构影响较小,伴随粘性菌胶团的大量出现,各功能类群的比例变化较小,但原生动物总量持续增加,其中菌食性纤毛虫呈线性增加,典型原生动物为钟虫（Vorticella sp.）。     

木棉基活性炭纤维吸附性能的研究

采用浸渍(NH₄)₂HPO₄化学活化法650℃时制备得到3种新型木棉基活性炭纤维,即只浸渍不预氧化方法处理的AK1(activated kapok),先浸渍后预氧化的AK-2和先预氧化后浸渍的AK-3。利用制备得到的活性炭纤维处理苯酚和亚甲基蓝的模拟废水,AK-2具有苯酚最大吸附量(137.00 mg/g),AK-1具有亚甲基蓝最大吸附量(274.11 mg/g)。吸附苯酚时,在静态平衡实验中,更符合Freundlich吸附等温线;在动力学实验中,更符合准一级反应。吸附亚甲基蓝时,在静态平衡实验中,AK-1更符合Langmuir模型,AK-2 、AK-3更符合Freundlich吸附等温线;在动力学实验中,更符合准二级反应。     

Cu~(2+)、Zn~(2+)对生物脱氮系统的影响

Cu2+和Zn2+是污水处理工艺中经常遇到的金属离子.在驯化好的活性污泥系统中,研究了金属离子Cu2+和Zn2+在0～100 mg/L浓度下对活性污泥牛物脱氮系统的影响.试验发现Cu2+＞5 mg/L、Zn2+＞30 ms/L时,对硝化过程具有明显的抑制作用,在同样浓度的试验条件下Cu2+对硝化过程的抑制作用比Zn2+大.Cu2+≤0.5 mg/L时对反硝化过程具有一定的促进作用,有助于提高TN的去除效果;Cu2+＞0.5 mg/L时,对反硝化产牛抑制作用,随着浓度的增加,TN去除率逐渐下降.Zn2+不影响反硝化过程,仅在大于30 mg/L时,对硝化过程产生抑制作用.重金属Cu2+对生物脱氮系统的影响明显强于Zn2+.     

固相萃取-高效液相色谱法测定地表水中的溴氰菊酯

建立了固相萃取-高效液相色谱-二极管阵列扫描测定地表水中溴氰菊酯的方法。溴氰菊酯经C18小柱富集,用6．0mL二氯甲影丙酮（1：1,v／v）洗脱,氮吹转换溶剂为甲醇并定容至1mL后由高效液相色谱仪进行分析,检测波长为270hm,通过保留时间与特征紫外吸收图谱定性,外标法定量。方法检出限1．0ug／L;线性范围1．0～97．0ug,／L,／相关系数0．9999;相对标准偏差7．7％-17．5％（n=6）;回收率在90．6％～111．9％。方法简单,快速,经济环保。     

CASS处理技术的原理和应用

介绍了CASS工艺的原理、特点、核心构筑物和设计、运行中应注意的主要问题以及常见故障的排除方法。     

Outlier identification and visualization for Pb concentrations in urban soils and its implications for identification of potential contaminated land

Outliers in urban soil geochemical databases may imply potential contaminated land. Different methodologies which can be easily implemented for the identification of global and spatial outliers were applied for Pb concentrations in urban soils of Galway City in Ireland. Due to its strongly skewed probability feature, a Box–Cox transformation was performed prior to further analyses. The graphic methods of histogram and box-and-whisker plot were effective in identification of global outliers at the original scale of the dataset. Spatial outliers could be identified by a local indicator of spatial association of local Moran's I, cross-validation of kriging, and a geographically weighted regression. The spatial locations of outliers were visualised using a geographical information system. Different methods showed generally consistent results, but differences existed. It is suggested that outliers identified by statistical methods should be confirmed and justified using scientific knowledge before they are properly dealt with.     

青海省生态环境监测现状与建议

3C章阐述了青海省生态环境监测的现状分析了存在的问题提出了改进的建议。     

Biofiltration treatment of odors from municipal solid waste treatment plants

An in situ compost biofilter was established for the treatment of odors from biostabilization processing of municipal solid waste. The concentrations of total volatile organic compounds (VOCs) in odors and their components were measured. Biofilter media was characterized in terms of total carbon (TC), total nitrogen (TN), total phosphorus (TP), organic matter (OM), pH value and determination of bacterial colony structure. Gas chromatography–mass spectrometry (GC–MS) analysis showed that the main components of the produced gas were benzene, toluene, ethylbenzene and xylene (BTEX) along with other alkanes, alkenes, terpenes, and sulphur compounds. The compost biofilter had remarkable removal ability for alkylated benzenes (>80%), but poor removal for terpenes (～30%). Total VOC concentrations in odors during the biostabilization process period ranged from 0.7 to 87 ppmv, and the VOC removal efficiency of the biofilter varied from 20% to 95%. After about 140 days operation, TN, TC, TP and OM in compost were kept almost stable, but the dissolved N, NH₄–N and NO₃–N experienced an increase of 44.5%, 56.2% and 76.3%, respectively. Dissolved P decreased by 27.3%. The pH value experienced an increase in the early period and finally varied from 7.38 to 8.08. Results of bacterial colony in packing material indicated that bacteria and mold colony counts increased, but yeasts and actinomyces decreased along with biofilter operation, which were respectively, 3.7, 3.4, 0.04 and 0.07 times of their initial values.