Electrochemical combustion of herbicide mecoprop in aqueous medium using a flow reactor with a boron-doped diamond anode

The anodic oxidation of 1.8l of solutions with mecoprop (2-(4-chloro-2-methylphenoxy)-propionic acid or MCPP) up to 0.64 g l(-1) in Na2SO4 as background electrolyte within the pH range 2.0-12.0 has been studied using a flow plant containing a one-compartment filter-press electrolytic reactor with a boron-doped diamond (BDD) anode and a stainless steel cathode, both of 20-cm2 area. Electrolyses carried out in batch under steady conditions and operating at constant current density between 50 and 150 mA cm(-2) always yield complete mineralization due to the great concentration of hydroxyl radical generated at the BDD anode. The degradation rate is practically independent of pH and Na2SO4 concentration, but it becomes faster with increasing MCPP concentration, current density, temperature and liquid flow rate. The effect of these parameters on current efficiency and energy cost has also been investigated. Generated weak oxidants such as H2O2 and peroxodisulfate ion have little influence on the mineralization process. The kinetics for the herbicide decay follows a pseudo first-order reaction with a higher rate constant when current density increases. Aromatic products such as 4-chloro-o-cresol, 2-methylhydroquinone and 2-methyl-p-benzoquinone, and generated carboxylic acids such as maleic, fumaric, lactic, pyruvic, tartronic, acetic and oxalic, have been identified as intermediates by chromatographic techniques. The initial chlorine is completely released in the form of chloride ion, which is slowly oxidized to Cl2 at the BDD anode. A reaction pathway for MCPP mineralization involving all products detected is proposed.     

Spatial and temporal dimensions of landscape fragmentation across the Brazilian Amazon

Regional Environmental Change - The Brazilian Amazon in the past decades has been suffering severe landscape alteration, mainly due to anthropogenic activities, such as road building and land...     

Recycling of air pollution control residues from municipal solid waste incineration into lightweight aggregates

This work focuses on the assessment of technological properties and on the leaching behavior of lightweight aggregates (LWA) produced by incorporating different quantities of air pollution control (APC) residues from municipal solid waste (MSW) incineration. Currently this hazardous waste has been mostly landfilled after stabilization/solidification. The LWA were produced by pelletizing natural clay, APC residues as-received from incineration plant, or after a washing treatment, a small amount of oil and water. The pellets were fired in a laboratory chamber furnace over calcium carbonate. The main technological properties of the LWA were evaluated, mainly concerning morphology, bulk and particle densities, compressive strength, bloating index, water adsorption and porosity. Given that APC residues do not own expansive (bloating) properties, the incorporation into LWA is only possible in moderate quantities, such as 3% as received or 5% after pre-washing treatment.The leaching behavior of heavy metals from sintered LWA using water or acid solutions was investigated, and despite the low acid neutralization capacity of the synthetic aggregates, the released quantities were low over a wide pH range.In conclusion, after a washing pre-treatment and if the percentage of incorporation is low, these residues may be incorporated into LWA. However, the recycling of APC residues from MSW incineration into LWA does not revealed any technical advantage.     

CircSiZer: an exploratory tool for circular data

Smoothing methods and SiZer (SIgnificant ZERo crossing of the derivatives) are useful tools for exploring significant underlying structures in data samples. An extension of SiZer to circular data, namely CircSiZer, is introduced. Based on scale-space ideas, CircSiZer presents a graphical device to assess which observed features are statistically significant, both for density and regression analysis with circular data. The method is intended for analyzing the behavior of wind direction in the atlantic coast of Galicia (NW Spain) and how it has an influence over wind speed. The performance of CircSiZer is also checked with some simulated examples.     

Green coconut shells applied as adsorbent for removal of toxic metal ions using fixed-bed column technology

This study applies green coconut shells as adsorbent for the removal of toxic metal ions from aqueous effluents using column adsorption. The results show that a flow rate of 2 mL/min and a bed height of 10 cm are most feasible. Furthermore, larger amounts of effluent can be treated for removal of single ions. The breakthrough curves for multiple elements gave the order of adsorption capacity: Cu⁺² > Pb⁺² > Cd⁺² > Zn⁺² > Ni⁺². Real samples arising from the electroplating industry can be efficiently handled.     

Elaphoidella grandidieri (Harpacticoida: Copepoda): demographic characteristics and possible use as live prey in aquaculture

In freshwater ecosystems, rotifers and cladocerans are ideal prey for fish larvae whereas copepods, due to their purported low growth rate and predatory tendency, are not. We recently isolated the parthenogenetic Elaphoidella grandidieri (Gueme et Richard, 1893) a benthic freshwater harpacticoid, from a fish farm in the State of Morelos, central Mexico and tested its potential as a live prey organism for larval vertebrates. Population growth and life table demography experiments were conducted, in 100 ml recipients with 50 ml of test medium on a diet of Scenedesmus acutus at a density of 1.0 X 10(6) cell ml(-1); the former on live algae alone while the latter on live algae as well as detritus. We also conducted experiments to document the prey preference for this copepod by the larval Ameca splendens (Pisces: Goodeidae) and Ambystoma mexicanum (Amphibia: Ambystomatidae), fed the rotifer Plationus patulus, the ostracod Heterocypris incongruens, and the cladocerans Moina macrocopa and Daphnia pulex. Elaphoidella grandidieri is relatively easy to maintain under laboratory conditions, reaching densities (copepodites and adults) of more than 10,000 l(-1). The generation time ranged between 30-45 days, depending on the diet. The net reproductive rate was as high as 60 nauplii female(-1) day (1). Population growth rates ranged between 0.03 and 0.11 d(-1), live algae being the superior diet compared to detritus. Both predators showed no preference for E. grandidieri, but in the absence of alternate prey they consumed 80% of the harpacticoids offered. The data have been discussed in relation to the potential of E. grandidierias live food for aquaculture.     

Geochemical and ecological significance of soil lipids under Rhododendron ponticum stands

The bio-geographical significance of Rhododendron ponticum spp. baeticum (Ericaceae) as a relict species is well recognized. However, out of its native habitat it is an invasive exotic considered a major threat to natural ecosystems in areas of Atlantic Western Europe. The studies on the impact of Rhododendron influence on soil organic matter composition and associated ecological implications, i.e. presence of bioactive compounds with ecological significance, are limited. This work describes the soil lipid assemblage in three sites under Rhododendron stands and adjacent sites with deciduous oak (Quercus canariensis), both in their native habitats in Southern Spain (Sierra de Luna, Cádiz). The results are discussed in terms of organic matter dynamics and the presence of molecules that may be associated with Rhododendron invasive success. The soils are acid Xerochrepts formed on siliceous sands. Composite soil samples were taken at two depths (0?C10?cm and 10?C20?cm) and soxhlet extracted with a dichloromethane-methanol mixture (3:1). Soil lipid assemblage was studied by GC/MS after fractionation and appropriate derivatization of extracts. The qualitative chemical composition of soil extractable lipids under Rhododendron is reported here for the first time. Our results show that soil n-alkane and fatty acid distributions are compatible with an input from plant epicuticular waxes, as well as with the occurrence of selective preservation of long-chain fatty acids with depth. The pattern of short-chain n-alkanes found in surface samples indicates an anthropogenic contamination threat from nearby industrialized areas of ??Campo de Gibraltar??. The presence of branched iso and anteiso C₁₅ and C₁₇, ??-hydroxy fatty acids and the sterol brassicasterol points to high microbial soil activity. Finally, the pentacyclic triterpenes taraxerone and taraxerol were detected in soils with Rhododendron but not with Quercus. These are known bio-active plant compounds and could be related with the effectiveness of Rhododendron as an invasive exotic species.     

Alkylphenols and polycyclic aromatic hydrocarbons in eastern Mediterranean Spanish coastal marine bivalves

This paper reports the first results on alkylphenol pollution in edible bivalves from the Spanish coast. Two sampling campaigns (July 2006 and July 2007) were carried out to determine the concentration of nonylphenol (NP), octylphenol (OP), and eight polycyclic aromatic hydrocarbons (PAHs) in wild mussels (Mytilus galloprovincialys) and clams (Donax trunculus) at 14 sampling sites along the eastern Mediterranean Spanish coast. The results show that NP is the predominant alkylphenol, being the port of Valencia the most polluted area (up to 147 ??g/kg wet weight in clams). Moving away from the ports the concentration of NP in bivalves decreased. OP concentration was below its detection limit in most of the studied areas and its maximum concentration (6 ??g/kg w/w) was measured in clams from the port of Sagunto. The presence of low levels of PAHs was observed in most of the studied areas. The total PAHs concentration (i.e., sum of the eight measured PAHs) achieved a maximum value of 10.09 ??g/kg w/w in the north coast of Valencia city. The distribution pattern of the individual PAHs showed that both pollution sources petrogenic and pyrolytic were present in the sampled areas. Fluoranthene was the most abundant PAH in mussels while benzo(b)fluoranthene in clams. The maximum concentration of 10 ??g/kg w/w for benzo(a)pyrene established by the European Commission was never reached, indeed sampled bivalves showed concentrations 10 times lower than this reference value. Thus, they can be considered safe for human consumption. Despite the low contamination levels, the results show an overall pollution of bivalves by alkylphenol and PAHs as well as an increment in the number of polluted areas from 2006 to 2007. Thus, periodical sampling campaigns should be carried out to monitor the long-term tendency of these toxic and persistent pollutants.     

Levels and chemical composition of PM in a city near a large Cu-smelter in Spain

A long-term series (2001-2008) of chemical analysis of atmospheric particulate matter (PM(10) and PM(2.5)) collected in the city of Huelva (SW Spain) is considered in this study. The impact of emission plumes from one of the largest Cu-smelters in the world on air quality in the city of Huelva is evidenced by the high daily and hourly levels of As, other potentially toxic elements (e.g. Cu, Zn, Cd, Se, Bi, and Pb) in particulate matter, as well as the high levels of some gaseous pollutants (NO(2) and SO(2)). Mean arsenic levels in the PM10 fraction were higher than the target value set by European Directive 2004/107/EC (6 ngAs m(-3)) for 1(st) January 2013. Hourly peak concentrations of As and other metals and elements (Zn, Cu, P and Se) analyzed by PIXE can reach maximum hourly levels as high as 326 ngAs m(-3), 506 ngZn m(-3), 345 ngCu m(-3), 778 ngP m(-3) and 12 ngSe m(-3). The contribution of Cu-smelter emissions to ambient PM is quantified on an annual basis in 2.0-6.7 μg m(-3) and 1.8-4.2 μg m(-3) for PM(10) and PM(2.5), respectively. High resolution outputs of the HYSPLIT dispersion model show the geographical distribution of the As ambient levels into the emission plume, suggesting that the working regime of the Cu-smelter factory and the sea breeze circulation are the main factors controlling the impact of the Cu-smelter on the air quality of the city. The results of this work improve our understanding of the behaviour of industrial emission plumes and their impact on air quality of a city, where the population might be exposed to very high ambient concentrations of toxic metals during a few hours.