Influence of the mode of matrix porosity determination on matrix diffusion calculations

The theoretical basis for matrix diffusion in fractured rocks and the methodology for the determination of diffusion coefficients in the laboratory are well established. One significant problem, however, remains in that it is difficult to quantify the degree of sample disturbance affecting the geometrical, geophysical and hydraulic properties of the rock matrix. A new technique, with in situ rock impregnation with resin, for examining the diffusion-accessible rock matrix has been developed and successfully adopted to the rock matrix behind a water-conducting fracture in host crystalline rocks at Nagra's Grimsel Test Site in Switzerland and JNC's Kamaishi In Situ Test Site in Japan. In line with the results of a large number of natural analogue and laboratory studies, the existence of an in situ interconnected pore network was substantiated. Matrix porosities determined on the laboratory samples from both the sites are 1.5-3 times higher than in situ values, irrespective of the technique applied. On the Grimsel granodiorite matrix, matrix porosity existing in situ and artefacts of stress release and physical disturbance, induced by sampling and sample preparation, were clearly distinguished, allowing in situ porosity to be quantified. Laboratory work with conventional techniques tends to overestimate the porosity of the rock matrix, hence leading to an overestimation of in situ matrix diffusion. The implications of these differences to a repository performance assessment are assessed with a couple of examples from existing assessments, and recommendations for future approaches to the examination of in situ matrix porosity are made.     

Integrated Estimation of the Effect of Physical Factors on Human Functional State During Mental Work

The purpose of this study was to develop a model for an integrated estimation of the functional state of the human organism (FSHO) and an integral estimation of physical factors (PF) for hygienic rating. Tests were performed twice with 3 men in 0.7-clo clothing during 4-hr mental work with 9 combinations of 4 PF: wideband noise (55–83 dB(A)), whole-body vibration (6 Hz, a_z = 0.2–1.8 ms^?2), air temperature (18–30 °C), and illumination (1, 3, 5 lx). Thermoregulatory, cardiovascular, and psychophysiological reactions and temporary threshold of hearing (TTS₂) shifts were studied. For the integral estimation of PF influence on FSHO the model F(y₁, y₂, ... y_m) = f(x₁, x₂, ... x_n) was used, relating both FSHO and PF sets. The most important physiological parameters in creating FSHO are defined and the contribution of individual parameters of FSHO and PF is found.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.     

Assessing Sediment Yield for Selected Watersheds in the Laurentian Great Lakes Basin Under Future Agricultural Scenarios

In the Laurentian Great Lakes Basin (GLB), corn acreage has been expanding since 2005 in response to high demand for corn as an ethanol feedstock. This study integrated remote sensing-derived products and the Soil and Water Assessment Tool (SWAT) within a geographic information system (GIS) modeling environment to assess the impacts of cropland change on sediment yield within four selected watersheds in the GLB. The SWAT models were calibrated during a 6 year period (2000–2005), and predicted stream flows were validated. The R ² values were 0.76, 0.80, 0.72, and 0.81 for the St. Joseph River, the St. Mary River, the Peshtigo River, and the Cattaraugus Creek watersheds, respectively. The corresponding E (Nash and Sutcliffe model efficiency coefficient) values ranged from 0.24 to 0.79. The average annual sediment yields (tons/ha/year) ranged from 0.12 to 4.44 for the baseline (2000 to 2008) condition. Sediment yields were predicted to increase for possible future cropland change scenarios. The first scenario was to convert all “other” agricultural row crop types (i.e., sorghum) to corn fields and switch the current/baseline crop rotation into continuous corn. The average annual sediment yields increased 7–42 % for different watersheds. The second scenario was to further expand the corn planting to hay/pasture fields. The average annual sediment yields increased 33–127 % compared with baseline conditions.     

Toward Cyborg PPGIS: exploring socio-technical requirements for the use of web-based PPGIS in two municipal planning cases,Stockholm region,Sweden

Web-based Public Participation Geographic Information Systems (PPGIS) are increasingly used for surveying place values and informing municipal planning in contexts of urban densification. However, research is lagging behind the rapid deployment of PPGIS applications. Some of the main opportunities and challenges for the uptake and implementation of web-based PPGIS are derived from a literature review and two case studies dealing with municipal planning for urban densification in the Stockholm region, Sweden. A simple clustering analysis identified three interconnected themes that together determine the performance of PPGIS: (i) tool design and affordances; (ii) organisational capacity; and (iii) governance. The results of the case studies augment existing literature regarding the connections between the different socio-technical dimensions for the design, implementation and evaluation of PPGIS applications in municipal planning. A cyborg approach to PPGIS is then proposed to improve the theoretical basis for addressing these dimensions together.     

Planning for compact urban forms: local growth-management approaches and their evolution over time

Urban growth is a key issue for spatial planning as it influences urban patterns and disrupts open landscapes. To effectively steer urban growth towards compact urban forms, many growth-management policies have been developed over recent decades. However, few studies have assessed how municipal policy mixes have evolved over time. In our representative Swiss-wide survey, we evaluated the prevalence and the time of introduction of 18 policies. Our results indicate that large municipalities use a broad range of reinforcing policies over decades. In contrast, small municipalities mostly rely on conventional land-use regulations. The lack of innovative, incentive-based policies casts doubt on small municipalities' ability to effectively manage urban growth. However, our analyses reveal recent efforts by small municipalities to diversify approaches to growth management and adopt innovative policies. These efforts should be supported by guiding small municipalities in their policy choices, and providing support to those lacking planning capacity.     

“We can keep the fire burning”: building action competence through environmental justice education in Uganda and Germany

The global dimensions of climate change necessitate a response that takes national differences – social, economic, geographic, and cultural – into account. Action-oriented education has a key role to play in advancing citizen engagement in a culture of sustainability. This paper describes research conducted with one such education programme, Youth Leading Environmental Change (YLEC), which operates in six countries and engages university-aged youth in discussion and practice related to global sustainability, systems thinking, and environmental justice. YLEC aims to advance four key competencies; this paper focuses on the goal of action competence, which involves acquiring knowledge, reflecting on experience in the context of one’s values, envisioning alternative futures, and acting individually and collectively to advance those alternatives. The present article examines the impacts of YLEC on environmental action competence in two of the countries involved in this research: Uganda and Germany. In-depth interviews were conducted with participants in both countries to examine the development of action competence during and after the programme. Findings suggest that outcomes differed in each country, reflective of participants’ different lived experiences. YLEC effectively built on the conditions faced in each country to accompany youth to a higher level of awareness and action. These findings have implications for environmental education programmes striving to work with multiple nations and diverse participants.     

Physical and Chemical Connectivity of Streams and Riparian Wetlands to Downstream Waters: A Synthesis

Streams, riparian areas, floodplains, alluvial aquifers, and downstream waters (e.g., large rivers, lakes, and oceans) are interconnected by longitudinal, lateral, and vertical fluxes of water, other materials, and energy. Collectively, these interconnected waters are called fluvial hydrosystems. Physical and chemical connectivity within fluvial hydrosystems is created by the transport of nonliving materials (e.g., water, sediment, nutrients, and contaminants) which either do or do not chemically change (chemical and physical connections, respectively). A substantial body of evidence unequivocally demonstrates physical and chemical connectivity between streams and riparian wetlands and downstream waters. Streams and riparian wetlands are structurally connected to downstream waters through the network of continuous channels and floodplain form that make these systems physically contiguous, and the very existence of these structures provides strong geomorphologic evidence for connectivity. Functional connections between streams and riparian wetlands and their downstream waters vary geographically and over time, based on proximity, relative size, environmental setting, material disparity, and intervening units. Because of the complexity and dynamic nature of connections among fluvial hydrosystem units, a complete accounting of the physical and chemical connections and their consequences to downstream waters should aggregate over multiple years to decades.     

Occurrence,functions and biosynthesis of polyamides in microorganisms and biotechnological production

Microorganisms are able to synthesize three different polyamides by enzymatic processes independently from ribosomal protein biosynthesis: poly(gamma-D-glutamic acid), poly(epsilon-L-lysine) and multi-L-arginyl-poly(L-aspartic acid) which is also referred to as cyanophycin. These polyamides, which occur mainly in Bacillus spp. (and only a few other eubacteria and the nematocysts of Cnidaria, in Streptomyces albulus or in cyanobacteria, respectively), have recently attracted considerable interest of the chemical industry and may be suitable for various applications. This review summarizes our current knowledge on the occurrence, biosynthesis, physiological functions, and biodegradation as well as on the properties and putative applications of these polyamides. Emphasis is placed on the enzymology of the polymerization and on the genes encoding the polymerizing enzymes, which have only recently become available for cyanophycin synthetases. Prospects for novel production processes. in particular for cyanophycin, are also presented.