An investigation on pollutant emissions from co-firing of RDF and coal

Pollutant emissions from co-firing of refuse derived fuel (RDF) and coal were investigated in a vortexing fluidized bed combustor (VFBC). RDF-5 was made of common municipal solid waste (MSW). CaCO₃ was injected in the combustor to absorb HCl at 850 °C. The results show that NO_x and HCl emissions increase with RDF-5 co-firing ratio. The NO_x concentration in flue gas at the bottom of the combustor is higher than that at the top. However, the trend of HCl released is reverse compared with NO_x emissions. It was found that the HCl concentration decreases with increasing the molar ratio of Ca/Cl. However, the effect of CaCO₃ addition on HCl retention is not significant when the molar ratio of Ca/Cl is higher than 5. The chlorine content in fly ash increases obviously with the molar ratio of Ca/Cl. PCDD/Fs emissions decrease slightly with an addition of CaCO₃. In this study incomplete combustion is regarded as the main cause for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) formation.     

An application of the theory of planned behaviour to study the influencing factors of participation in source separation of food waste

Tremendous increases in biodegradable (food waste) generation significantly impact the local authorities, who are responsible to manage, treat and dispose of this waste. The process of separation of food waste at its generation source is identified as effective means in reducing the amount food waste sent to landfill and can be reused as feedstock to downstream treatment processes namely composting or anaerobic digestion. However, these efforts will only succeed with positive attitudes and highly participations rate by the public towards the scheme. Thus, the social survey (using questionnaires) to analyse public’s view and influencing factors towards participation in source separation of food waste in households based on the theory of planned behaviour technique (TPB) was performed in June and July 2011 among selected staff in Universiti Putra Malaysia, Serdang, Selangor. The survey demonstrates that the public has positive intention in participating provided the opportunities, facilities and knowledge on waste separation at source are adequately prepared by the respective local authorities. Furthermore, good moral values and situational factors such as storage convenience and collection times are also encouraged public’s involvement and consequently, the participations rate. The findings from this study may provide useful indicator to the waste management authorities in Malaysia in identifying mechanisms for future development and implementation of food waste source separation activities in household programmes and communication campaign which advocate the use of these programmes.     

基于优化模型的抚仙湖营养物标准技术经济评估方法

在对美国水质标准经济分析研究的基础上,结合我国环境管理的实际情况,构建湖泊营养物标准的技术经济评估框架。计算标准建议值条件下的湖泊营养物容量及入量湖,得到削减量。通过不确定性优化模型对削减量进行分配,核算湖泊富营养化控制成本,并假设标准执行后,对流域经济造成的影响进行评估。将该方法应用于抚仙湖营养物标准的技术经济评估系统,结果表明,通过优化模型对削减量进行分配的削减成本较原规划低,通过构建的技术经济评估框架对该成本进行评估,标准执行后,对流域经济影响适中。     

MBR-超滤-反渗透工艺深度处理化学合成橡胶废水的生产性试验

采用MBR-超滤-反渗透(MBR-UF-RO)组合工艺深度处理化学合成橡胶生产废水。MBR单元水力停留时间(HRT)为5 h,处理生产废水水量1 181 m³/d,进水COD_Cr为158~451 mg/L（平均258 mg/L）,出水COD_Cr为5~101 mg/L（平均31 mg/L）,出水浊度小于0.2 NTU,出水水质满足超滤进水水质要求。每15天交替进行高、低浓度在线化学清洗可有效控制MBR膜污染。MBR出水与430 m³/d的循环冷却排污水混合后进行超滤和反渗透处理,反渗透出水电导率稳定在30~45 μS/cm,满足企业回用冷却水水质要求。整套废水处理系统废污水回用率为62.8%,回用水的制水成本为4.34元/m³。     

规模化养猪场生命周期环境影响评价

利用生命周期评价(LCA)方法建立规模化养猪场系统能源消耗和污染物排放清单,对系统生命周期不同阶段环境影响进行评价,通过评价找出降低环境影响的方法。研究了四个环境影响类型：能源消耗、富营养化、全球变暖和环境酸化,得出各类型环境影响指数分别为8.38×10^-3,1.91×10^-3,9.80×10^-3和2.01×10^-2;将系统生命周期分成饲料原料生产、生猪饲养和废物处理三个环节,得出各环节环境影响综合指数分别为2.52×10^-2,1.23×10^-2和2.71×10^-3。结果表明,饲料原料生产环节的环境影响最大,因此,减少氮肥的使用量并在生产过程中实施节能和清洁生产,是控制规模化养猪场生命周期环境影响的关键。     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

Study on NOx removal from simulated flue gas by an electrobiofilm reactor: EDTA-ferrous regeneration and biological kinetics mechanism

Environmental Science and Pollution Research - The regeneration of EDTA-FeII is a key step in electrobiofilm reduction-integrated systems for NOx removal from industrial boiler flue gas. The...     

Synthesis of efficient Y-Bi2WO6/G visible light photocatalysts with high stability for pollutant degradation

Environmental Science and Pollution Research - For effective photocatalytic pollutant degradation on bismuth tungstate (Bi2WO6), it is vital to enhance the photogenerated charge separation and the...     

Dynamic characteristics of chlorine dispersion process and quantitative risk assessment of pollution hazard

Environmental Science and Pollution Research - The aim of this study was to analyze dispersion behavior characteristics and pollution hazard risk after a release of liquid chlorine. A full-scale...     

Occurrence,source apportionment,and carcinogenic risk assessment of polycyclic aromatic hydrocarbons in urban road dusts in Shanghai

Environmental Science and Pollution Research - Polycyclic aromatic hydrocarbons (PAHs), as a class of important environmental pollutants, have received considerable concern due to their widespread...