Chlorination of bisphenol A in aqueous media: formation of chlorinated bisphenol A congeners and degradation to chlorinated phenolic compounds

The chlorination of bisphenol A (BPA) in aqueous media was investigated in order to describe the degradation profile of this compound and the formation of chlorinated products. Aqueous solutions of BPA (approx. 1 mg/l) were chlorinated by sodium hypochlorite solution at room temperature and under weakly alkaline conditions. Chlorinated compounds were extracted with dichloromethane and determined by gas chromatography/mass spectrometry (GC/MS). BPA was consumed completely within 5 min of chlorination, when the initial chlorine concentration was 10.24 mg/l (molar ratio to BPA, 58.7). On the other hand, when the initial chlorine concentration was 1.03 mg/l (molar ratio, 6.56), 9.3% of BPA still remained after 60 min chlorination. Five chlorinated BPA congeners, 2-chlorobisphenol A (MCBPA), 2,6-dichlorobisphenol A (2,6-D2CBPA), 2,2'-dichlorobisphenol A (2,2'-D2CBPA), 2,2',6-trichlorobisphenol A (T3CBPA) and 2,2', 6,6'-tetrachlorobisphenol A (T4CBPA) were formed in the earlier stages of chlorination. Several chlorinated phenolic compounds, 2,4,6-trichlorophenol (T3CP), 2,6-dichloro-1,4-benzoquinone (D2CBQ), 2,6-dichloro-1,4-hydroquinone (D2CHQ), C9H10Cl2O2, C9H8Cl2O and C10H12Cl2O2, were also formed by further chlorination.     

Erythrocyte supply from the spleen and hemoconcentration in hypoxic yellowtail

Hematocrit and hemoglobin concentration of yellowtail blood elevated more than 30% during severe hypoxia for 35 or 40 min. About 40% of the hematocrit elevation is considered to have been caused by erythrocyte supply from the spleen, and about 60% by hemoconcentration due to water shift out of the circulating plasma. Osmotic swelling of erythrocytes is considered not to have occurred, judging from the constant level in the saturation index of the blood.     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.     

Contamination of butyltin and phenyltin compounds in the marine environment of Otsuchi Bay, Japan

Butyltin (BT) and phenyltin (PT) compounds were measured in seawater, sediment, and biological samples collected from coastal areas of Otsuchi Bay, Japan. Tributyltin (TBT) compounds in seawater, sediment, plankton, mussels, scallops and fish were in the range of 0.008-0.074 microg liter(-1), 0.01-0.64 mg (kg dry wt)(-1), 0.24-9.8 mg (kg dry wt)(-1), 0.04-0.18 mg (kg wet wt)(-1), 0.10-0.13 mg (kg wet wt)(-1) and 0.01-0.02 mg (kg wet wt)(-1), respectively. Trace amount of PTs were found in seawater. The highest concentrations of TBT and triphenyltin (TPT) were found near a shipyard. Triorganotin compounds were more dominant than their metabolites. A positive correlation was observed between the concentrations of TBT and TPT in the mussels. Concentrations of TBT and TPT in mussels were high in the upper intertidal zone, and decreased toward the water.     

Mercury volatilization by the most mercury-resistant bacteria from the seawater of Minamata Bay in various physiological conditions

The volatilization of mercuric chloride (HgCl₂) and methyl mercuric chloride (CH₃HgCl) by the 45 strains (35 Pseudoalteromonas sp., 2 Vibrio sp., 1 Aeromonas sp., and 7 unclassified) of the most mercury-resistant bacteria from Minamata Bay seawater was examined in various physiological conditions. The bacteria could grow and volatilize HgCl₂ in the liquid medium containing 1-10% NaCl. Two Pseudoalteromonas strains could grow and volatilize HgCl₂ at pH levels ranging from 5.0 to 10.0. The resting cells of 43 strains could volatilize HgCl₂ at concentrations ranging from 30 to 68% after 1-h incubation at 30vv°C. The resting cells of 41 strains could volatilize CH₃HgCl at concentrations ranging from 13 to 88% after 1-h incubation at 30vv°C. Ninety-two percent of mercury was removed from the phosphate buffer containing 0.1 7g/ml by a resting cell of Pseudoalteromonas strain H-4 after 30-min incubation at 30vv°C. We were able to screen the special bacteria, which could volatilize mercury compounds at a high rate in various physiological conditions, for the purpose of developing mercury removal methods using bacteria.     

Mid–trimester hyperechogenic bowel in a fetus of Japanese origin carrying a new mutation of CFTR gene (L548Q)

We present a case of a fetus with hyperechogenic bowel, in which the L548Q mutation was detected in the mother of Japanese origin and the ΔF508 mutation in the father of Caucasian origin. The fetus proved to be compound heterozygous. Research into cystic fibrosis transmembrane conductance regulator (CFTR) mutations in this case was triggered by the fact that the fetus had a characteristic hyperechogenic bowel image with normal karyotype and no indications of intrauterine infections. Hyperechogenic bowel is highly indicative of a CFTR gene mutation. The incidence of cystic fibrosis (CF) in fetuses with mid-trimester hyperechogenic bowel is 5%, but once the most frequent mutations have been accounted for, rarer mutations must be investigated. Copyright © 2006 John Wiley & Sons, Ltd.     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

Reaction mechanism and pathway for the hydrothermal electrolysis of organic compounds

In this study, hydrothermal electrolysis experiments using glucose (a biorelated substance) as a starting material were carried out using a specially designed autoclave at 250°C. We could understand the fundamental reaction behavior of glucose under these conditions through various kinds of experiments and product analyses. Another series of experiments using pressurized CO₂ as an electrolyte was conducted to discover whether it is possible to use CO₂ as an alternative electrolyte to the conventional KCl electrolyte, with a view to lowering the environmental impact of the process. It was found that pressurized CO₂ was useful as an environmentally friendly electrolyte, although there were still some problems in terms of the reaction efficiency.     

Facile Preparation of Chitin/Cellulose Composite Films Using Ionic Liquids

In this study, we performed the facile preparation of chitin/cellulose composite films using two ionic liquids, 1-allyl-3-methylimidazolium bromide (AMIMBr) and 1-butyl-3-methylimidazolium chloride (BMIMCl); the former dissolves chitin and the latter dissolves cellulose. First, solutions of chitin in AMIMBr and cellulose in BMIMCl were individually prepared by heating each mixture at 100 °C for 24 h. Then, the homogeneous mixture of the two solutions was thinly casted on a glass plate, followed by standing at room temperature for 2 h. After the material was subjected to successive Soxhlet extractions with ethanol for 12 h and with water for 12 h, the residue was dried at room temperature to give a composite film. The crystalline structures of the polysaccharides were evaluated by the X-ray diffraction measurement. Furthermore, the thermal stability and mechanical property of the resulting composite film were estimated by the thermal gravimetric analysis measurement and tensile testing, respectively.