Analysis of injury mechanism of the elderly and non-elderly groups in minor motor vehicle accidents

Abstract

Objective: The purpose of this study is to investigate the injury patterns of noncatastrophic accidents by individual age groups.

Methods: Data were collected from the Korean In-Depth Accident Study database based on actual accident investigation. The noncatastrophic criteria were classified according to U.S. experts from the Centers for Disease Control and Prevention’s recommendations for field triage guidelines of high-risk automobile crash criteria by vehicle intrusions more than 12 in. on occupant sites (including the roof) and more than 18 in. on any site. The Abbreviated Injury Scale (AIS) was used to determine injury patterns for each body region. Severely injured patients were classified as Maximum Abbreviated Injury Scale (MAIS) 3 or higher.

Results: In this study, the most significant injury regions were the head and neck, extremities, and thorax. In addition, the incidence of severe injury among elderly patients was nearly 1.6 times higher than that of non-elderly patients. According to age group, injured body regions among the elderly were the thorax, head and neck, and extremities, in that order. For the non-elderly groups, these were head and neck, extremities, and thorax. Severe injury rates were slightly different for the elderly group (head and neck, abdomen) and non-elderly group (thorax, head and neck).

Conclusions: In both age groups, the rate of severe injury is proportional to an increase in crush extent zone. Front airbag deployment may have a relatively significant relationship to severe injuries.     

Influence of ship emissions on ozone concentrations around coastal areas during summer season

The influence of ship emissions on ozone (O₃) concentrations in a coastal area (CA) including Busan port, Korea was examined based on a numerical modeling approach during a high O₃ episode. The analysis was performed by two sets of simulation scenarios: (1) with ship emissions (e.g., TOTAL case) and (2) without ship emissions (e.g., BASE case). A process analysis (PA) (the integrated processes rate (IPR) and integrated reaction rate (IRR) analyses) was used to evaluate the relative contributions of individual physical and chemical processes in O₃ production in and around the CA (e.g., sites of Dong Sam (DS) and Dae Yeon (DY)). The model study suggested the possibility that pollutant gases emitted from the ships traversing Busan port can exert a direct impact on the O₃ concentration levels in the CA. Largest impacts of ship emissions on the O₃ concentrations were predicted at the coast (up to 15 ppb) and at inland locations (about 5 ppb) due to both the photochemical production of pollutant gases emitted from the ships and meteorological conditions. From the PA, the photochemical production of O₃ (P(O₃)) due to ship emissions in the CA was found to increase by a mean of 1.5 ppb h^?1 (especially by ≥10 ppb h^?1 at the DS site) during the day.     

Real-time bias-adjusted O3 and PM2.5 air quality index forecasts and their performance evaluations over the continental United States

The National Air Quality Forecast Capacity (NAQFC) system, which links NOAA’s North American Mesoscale (NAM) meteorological model with EPA’s Community Multiscale Air Quality (CMAQ) model, provided operational ozone (O₃) and experimental fine particular matter (PM_2.5) forecasts over the continental United States (CONUS) during 2008. This paper describes the implementation of a real-time Kalman Filter (KF) bias-adjustment technique to improve the accuracy of O₃ and PM_2.5 forecasts at discrete monitoring locations. The operational surface-level O₃ and PM_2.5 forecasts from the NAQFC system were post-processed by the KF bias-adjusted technique using near real-time hourly O₃ and PM_2.5 observations obtained from EPA’s AIRNow measurement network. The KF bias-adjusted forecasts were created daily, providing 24-h hourly bias-adjusted forecasts for O₃ and PM_2.5 at all AIRNow monitoring sites within the CONUS domain. The bias-adjustment post-processing implemented in this study requires minimal computational cost; requiring less than 10 min of CPU on a single processor Linux machine to generate 24-h hourly bias-adjusted forecasts over the entire CONUS domain.The results show that the real-time KF bias-adjusted forecasts for both O₃ and PM_2.5 have performed as well as or even better than the previous studies when the same technique was applied to the historical O₃ and PM_2.5 time series from archived AQF in earlier years. Compared to the raw forecasts, the KF forecasts displayed significant improvement in the daily maximum 8-h O₃ and daily mean PM_2.5 forecasts in terms of both discrete (i.e., reduced errors, increased correlation coefficients, and index of agreement) and categorical (increased hit rate and decreased false alarm ratio) evaluation metrics at almost all locations during the study period in 2008.     

中空纤维膜生物反应器处理二甲苯废气

采用中空纤维膜生物反应器(HFMB)去除气态二甲苯,研究比较了不同进口浓度、停留时间以及悬浮液中生物量对二甲苯净化效果的影响。实验结果表明:随着进口浓度的增加二甲苯净化效率先升高后平稳,生化降解能力(EC)则明显升高;随着停留时间的增加,二甲苯的净化效率明显增加。实验发现最佳的实验条件是:悬浮液循环速率50 L/h,pH值介于6.5到7.5之间,溶解氧6 mg/L左右,停留时间tR=8.8 s;二甲苯的处理效率可达到92%以上。结果还显示二甲苯净化效率随悬浮液循环流速的变化而波动不大,进口二甲苯的组成对净化效率也有一定的影响。与传统的生物法相比,膜生物反应器可以实现气相和液相的分离以及减少占地面积,具有很好的发展前景。     

The ionic compositions of fine and coarse particle fractions in the two urban areas of Korea

The ionic composition of PM2.5 and PM10 was investigated using PM samples collected from Seoul and Busan during the winter of 2002. Based on the measurement data, we attempted to investigate the relative roles of different source processes in the composition of airborne particles at the two distinct urban areas. According to our measurements, the major components of both PM fractions were clearly distinguished from each other at the two different sites. It was found that the ionic concentrations in coarse fractions were generally compatible with each other at the two sites (NH(4)(+), NO(3)(-), NSSS, etc.). However, differences in their concentration levels were significant in the fine fractions and their mass concentration levels in Seoul exhibit threefold enhancement relative to Busan. The results further indicated that anthropogenic signatures were generally more evident in the fine rather than coarse fractions at both sites. However, a comparison of the coarse fraction data indicated the dominance of natural (oceanic) processes at the Busan site and conservative relationships among the different ionic components. The results of the back trajectory analysis confirmed that air mass movement patterns influence the ionic compositions of PM across different particle fractions and between different study sites.     

可持续发展的理论与宏观调控模式

从可持续发展观和可持续发展战略出发,分析了传统发展观和发展模式的特点及其主要弊端;进而根据有关国际性文件中的可持续发展概念,给出了中国人易于理解的描述及其基本内涵,强调了人与自然和谐、发展与资源环境相协调是可持续发展的核心,并结合实例阐明了协同学理论是可持续发展的基本理论依据;在分析发展与资源环境相协调的基础条件之后,重点论述了它们之间的协调机制,提出了可持续发展的宏观调控模式。      

Polycyclic aromatic hydrocarbons in bulk PM2.5 and size-segregated aerosol particle samples measured in an urban environment

To analyze polycyclic aromatic hydrocarbons (PAHs) at an urban site in Seoul, South Korea, 24-hr ambient air PM_2.5 samples were collected during five intensive sampling periods between November 1998 and December 1999. To determine the PAH size distribution, 3-day size-segregated aerosol samples were also collected in December 1999. Concentrations of the 16 PAHs in the PM_2.5 particles ranged from 3.9 to 119.9 ng m⁻³ with a mean of 24.3 ng m⁻³.An exceptionally high concentration of PAHs(∼120 ng m⁻³) observed during a haze event in December 1999 was likely influenced more by diesel vehicle exhaust than by gasoline exhaust, as well as air stagnation, as evidenced by the low carbon monoxide/elemental carbon (CO/EC) ratio of 205 found in this study and results reported by previous studies. The total PAHs associated with the size-segregated particles showed unimodal distributions. Compared to the unimodal size distributions of PAHs with modal peaks at < 0.12 μm measured in highway tunnels in Los Angeles (Venkataraman and Friedlander, 1994), four- to six-ring PAHs in our study had unimodal size distributions, peaking at the larger size range of 0.28–0.53 μm, suggesting the coagulation of freshly emitted ultrafine particles during transport to the sampling site. Further, the fraction of PAHs associated with coarse particles(> 1.8 μm) increased as the molecular weight of the PAHs decreased due to volatilization of fine particles followed by condensation onto coarse particles.     

Correlation study of hazardous waste characteristics among various chemical processes in Republic of Korea

To harmonize with international standards, the Republic of Korea is in the process of converting its current hazardous waste classification system and setting up regulatory standards for all toxic substances present in hazardous waste. Detailed characterization of each form of hazardous waste belonging to five chemical processes and their correlations were studied. In the present work, the concentrations of 13 heavy metals, F^?, CN^?, 7 PAH compounds, total PCDD/F and 7 PCB isomers present in the hazardous waste generated among chemical processes such as synthetic rubber (SR), man-made fibers (MF), organic dyes and pigments (DP), pharmaceuticals and cosmetics were analyzed along with their leaching characteristics. Comparing all the processes, most of the heavy metal concentrations were high in SR waste. Naphthalene was the dominant PAH in most of the chemical process waste. PCDD/F concentrations of the samples were in the range of 0.001–0.003 ng I-TEQ/g. PCB isomer-101 and isomer-118 were found to be slightly higher than the permissible limit in the SR filter cake sample. SR process wastes doesn’t show any resemblance with the other process waste in either the heavy metals and PAH trend. Each sample from DP and MF were suitable only for hazardous waste landfill.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.