Investigating missing sources of glyoxal over China using a regional air quality model (RAMS-CMAQ)

Currently, modeling studies tend to significantly underestimate observed space-based glyoxal(CHOCHO) vertical column densities(VCDs), implying the existence of missing sources of glyoxal. Several recent studies suggest that the emissions of aromatic compounds and molar yields of glyoxal in the chemical mechanisms may both be underestimated, which can affect the simulated glyoxal concentrations. In this study, the influences of these two factors on glyoxal amounts over China were investigated using the RAMS-CMAQ modeling system for January and July 2014. Four sensitivity simulations were performed, and the results were compared to satellite observations. These results demonstrated significant impacts on glyoxal concentrations from these two factors.In case 1, where the emissions of aromatic compounds were increased three-fold,improvements to glyoxal VCDs were seen in high anthropogenic emissions regions. In case 2, where molar yields of glyoxal from isoprene were increased five-fold, the resulted concentrations in July were 3–5-fold higher, achieving closer agreement between the modeled and measured glyoxal VCDs. The combined changes from both cases 1 and 2 were applied in case 3, and the model succeeded in further reducing the underestimations of glyoxal VCDs. However, the results over most of the regions with pronounced anthropogenic emissions were still underestimated. So the molar yields of glyoxal from anthropogenic precursors were considered in case 4. With these additional mole yield changes(a two-fold increase), the improved concentrations agreed better with the measurements in regions of the lower reaches of the Yangtze River and Yellow River in January but not in July.     

Characterization particulate matter from several Chinese cooking dishes and implications in health effects

Cooking fume produced by oil and food at a high temperature releases large amount of fine particulate matter(PM) which have a potential hazard to human health. This chamber study investigated particle emission characteristics originated from using four types of oil(soybean oil, olive oil, peanut oil and lard) and different kinds of food materials(meat and vegetable). The corresponding emission factors(EFs) of number, mass, surface area and volume for particles were discussed. Temporal variation of size-fractionated particle concentration showed that olive oil produced the highest number PM concentration for the entire cooking process. Multiple path particle dosimetry(MPPD) model was performed to predict deposition in the human respiratory tract. Results showed that the pulmonary airway deposition fraction was the largest. It was also found that particles produced from olive oil led to the highest deposition. We strongly recommend minimizing the moisture content of ingredients before cooking and giving priority to the use of peanut oil instead of olive oil to reduce human exposure to PM.     

合肥市典型交通干道大气苯系物的特征分析

为研究合肥市交通干道大气苯系物污染状况,采用自主研制的差分吸收光谱(DOAS)系统,于2016年3月期间对合肥市交通主干道大气苯系物(苯、甲苯、间二甲苯和邻二甲苯)以及常规污染物NO_2、SO_2等进行了连续观测.观测结果显示,观测期间苯、甲苯、间二甲苯和邻二甲苯的平均浓度分别为:21.7、63.6、33.9和98.7μg·m~(-3).与国内外其它城市比较显示,合肥市交通干道大气苯和甲苯的污染处于中等水平,二甲苯的污染较为严重.结合观测期的间风速风向、T/B特征比值以及与CO等污染物的相关性,对上述苯系物来源进行了分析,结果显示观测期间T/B值为0.8~4.5,苯、甲苯与CO的相关性系数R分别为0.55和0.34.表明机动车尾气排放是观测区域苯和甲苯的主要排放源之一,同时也受到周边工业园区排放的影响,二甲苯的主要排放源为观测地点北偏东方向的涂料行业工业园区.苯和甲苯的夜间高浓度峰值分析结果表明,夜间的高浓度苯和甲苯可能主要来源于观测地点周边工业园区的排放.观测区域苯系物的臭氧生成潜势(OFP)表现为邻二甲苯间二甲苯甲苯苯,其中二甲苯的OFP占总OFP的85%,表明周边工业园区的排放对该地区臭氧生成的贡献较大.     

Efficient adsorption of Mn(Ⅱ) by layered double hydroxides intercalated with diethylenetriaminepentaacetic acid and the mechanistic study

In this study, greatly enhanced Mn(II) adsorption was achieved by as-synthesized diethylenetriaminepentaacetate acid intercalated Mg/Al layered double hydroxides(LDHsDTPA). The adsorption capacity of LDHs-DTPA was 83.5 mg/g, which is much higher than that of LDHs-EDTA(44.4 mg/g), LDHs-Oxalate(21.6 mg/g) and LDHs(28.8 mg/g). The adsorption data of aqueous Mn(II) using LDHs-DTPA could be well described by the pseudosecond order kinetics and Langmuir isotherm model. Thermodynamics study results also showed that the adsorption process of Mn(II) by LDHs-DTPA was exothermic as indicated by the negative ΔH value. Furthermore, based on the structural, morphological and thermostable features, as well as FT-IR and XPS characterizations of LDHs-DTPA and the pristine LDHs, the adsorption mechanism of Mn(II) was proposed. The carboxyl groups of DTPA were proposed to be the main binding sites for Mn(II), and the hydroxyl groups of LDHs also played a minor role in the adsorption process. Among the three common regeneration reagents, 0.1 mol/L Na_2CO_3 was the best for reusing LDHs-DTPA in Mn(II)adsorption. Besides, the Mn(II) adsorption performance could be hindered in the presence of typical inorganic ions, especially cations. Further specific modifications of LDHs-DTPA are suggested to get more selective adsorption of Mn(II) in practical applications.     

Pilot-scale experiments on multilevel contact oxidation treatment of poultry farm wastewater using saran lock carriers under different operation model

A pilot-scale multilevel contact oxidation reactors system, coupled with saran lock carriers,was applied for the treatment of poultry farm wastewater. The removal efficiencies of CODcr, ammonia, and the total nitrogen as well as the elimination performance of CODcr and total nitrogen along the three-level contact oxidation tanks under six designed operational models were investigated. Based on the performance of the nitrogen removal of the saran lock carriers and the distribution of anoxic–aerobic interspace under the suitable operation model, the mechanism of nitrogen removal of the system was also explored. The results revealed that the intermittent aeration under parallel model is the most suitable operation model, while the removal efficiencies of CODcr, ammonia, and the total nitrogen were 86.86%, 84.04%, and 80.96%, respectively. The effluent concentration of CODcr,ammonia, and the total nitrogen were 55.6 mg/L, 8.3 mg/L, and 12.0 mg/L, which satisfy both the discharge standard of pollutants for livestock and poultry breeding industry(GB18596–2001) and the first grade of the integrated wastewater discharge standard(GB 8978–1996). Moreover, the mechanism for the nitrogen removal should be attributed to the plenty of anoxic–aerobic interspaces of the biofilm and the three-dimensional spiral structure of the saran lock carriers, where the oxygen-deficient distribution was suitable for the happening of the simultaneous nitrification and denitrification process. Therefore, the multilevel contact oxidation tanks system is an effective pathway for the treatment of the poultry farm wastewater on the strength of a suitable operation model and novel carriers.     

Enzyme-electrolytic degradation of dichloromethane: Efficiency, kinetics and mechanism

Enzymatic electrolysis cell(EEC) has advantages over microbial electrolysis cell(MEC) due to the needless of microbe inoculation and high-efficiency of enzymatic reaction. In this study, an EEC was first applied to achieve the effective degradation of halogenated organic pollutants and dichloromethane(CH_2Cl_2) was utilized as a model pollutant. The results indicate that the degradation efficiency of CH_2Cl_2 after 2 hr reaction in the EEC was almost100%, which was significantly higher than that with enzyme(51.1%) or current(19.0%). The current induced the continuous regeneration of reduced glutathione(GSH), thus CH_2Cl_2 was degraded under the catalysis of GSH-dependent dehalogenase through stepwise dechlorination, and successively formed monochloromethane(CH_3Cl) and methane(CH_4). The kinetic result shows that with a current of 15 mA, the maximum specific degradation rate of CH_2Cl_2(3.77 × 10~(-3) hr~(-1)) was increased by 5.7 times. The optimum condition for CH_2Cl_2 dechlorination was also obtained with pH, current and temperature of 7.0, 15 mA and 35°C,respectively. Importantly, this study helps to understand the behavior of enzymes and the fate of halogenated organic pollutants with EEC, providing a possible treatment technology for halogenated organic pollutants.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

Enhanced removal of high-As(Ⅲ) from Cl(-Ⅰ)-diluted SO4(-Ⅱ)-rich wastewater at pH 2.3 via mixed tooeleite and(Cl(-Ⅰ)-free) ferric arsenite hydroxychloride formation

An advanced cost-saving method of removal of high-As(Ⅲ) from SO₄(-Ⅱ)-rich metallurgi cal wastewater has been developed by diluting the SO₄(-Ⅱ) content with As(Ⅲ)-Cl(-Ⅰ)-rich metallurgical wastewater and then by the direct precipitation of As(Ⅲ) with Fe(Ⅲ) at pH2.3.As(Ⅲ) removal at various SO₄(-Ⅱ)/Cl(-Ⅰ) molar ratios and temperatures was investigated The results showed that 65.2–98.2%of As(III) immobilization into solids occurred at the SO₄(Ⅱ)/Cl(-Ⅰ) mo...     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake, Lake Taihu, China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

降解酚的根瘤菌的研究

对两铢以铺代谢方式降解酚和离体固氮的根瘤菌(代号为:101-3,97-1)的特性进行了研究,其耐酚能力在1200ppm内,五天内能在完全培养基中把300ppm苯酚降解完;在含酚培养基中多次传代后,生长周期加快、产气,而结瘤特性丧失,但离体固氮酶活性比原菌株略有增加。经60ppm的吖啶橙处理后,获得的无质粒菌株,其降解酚的能力和结瘤特性完全消失,TTC(3-苯基-4-氮唑化氯)还原性增加,而革兰氏染色反应、运功性不变。