Extraterritorial Movements of a Forest Songbird in a Fragmented Landscape

Abstract: Forest isolation resulting from fragmentation is thought to impede the movement of forest songbirds. Because of the difficulty of tracking birds continuously, however, few data exist documenting the influence of isolation and landscape features on avian movements. During the breeding season, male Hooded Warblers (    Wilsonia citrina ) leave their small (<2.5 ha), isolated forest patches to travel between forest fragments. We documented a total of 106 forays (  n = 20 males) and found that individuals traveled up to 2.5 km away from their resident forest patch, primarily to solicit covert extra-pair copulations. Forays occurred despite the absence of forested corridors connecting fragments; even when corridors were present, males most often chose to fly directly across open fields. Resident patch size and distance to forests visited were not correlated with the frequency of forays. The maximum distance males flew over open fields did not exceed 465 m, and longer distances likely inhibit males from traveling outside their woodlots. If territorial establishment depends on the availability of extra-pair partners, then higher degrees of isolation between forests could explain why some species avoid settling in extremely fragmented landscapes. Conservation efforts should limit isolation between forest stands, thereby preserving the ability of animals to move within fragmented landscapes during the breeding season.     

Selection for male choice based primarily on mate compatibility in the oldfield mouse, Peromyscus polionotus rhoadsi

Despite the consensus that mate choice acts as a mechanism for selection of secondary sexual traits, the evolutionary forces affecting mate preferences themselves remain controversial. In this study, we first demonstrated selection acting directly on the mate preferences of monogamous male oldfield mice, Peromyscus polionotus rhoadsi. One group of male oldfield mice were allowed to express a social preference between two potential mates, and were subsequently paired with either their preferred or rejected female. Among these pairs, those containing preferred females produced more offspring than did those containing rejected females. We next demonstrated that this fitness advantage depended primarily on compatibility between the members of a mated pair. A second group of male oldfield mice were not allowed the opportunity to express a social preference between potential mates. Rather, these males were paired with females that had been either preferred or rejected by males in the first group. Among these pairs, those containing preferred females did not produce more offspring than those containing rejected females. In other words, individual mate preferences had fitness consequences only for those males that expressed them, demonstrating that these preferences were based primarily on compatibility between mates.     

Indigenous capacity for collaboration in Canada’s energy,forestry and mining sectors: research metrics and trends

This paper examines patterns in recently published research addressing Indigenous capacity for collaborative natural resource development in Canada’s forestry, energy, and mining sectors. As Indigenous involvement in natural resource development increases, so too does the body of associated scholarship. We gathered information on several core metrics (year of publication, authorship, and gender, author affiliation, journal titles, citation counts and impacts factors, and keywords) to analyze research output, trends, and gaps. Our bibliometric analysis of 49 articles from peer-reviewed journals confirms that Indigenous natural resource development and capacity research has steadily increased over the past decade in terms of the number and range of papers, authors, institutions, and cases examined. Research output peaked in 2013 and 2015. Authorship is distributed evenly between male and female lead researchers, with teams located across southern Canada, with highest concentrations in urban population centers of British Columbia, Manitoba, and Ontario. In contrast, the research sites are located in more northern, rural, and remote locations. That communities and projects under study are not currently matched with sites of research capacity raises questions about capacity building and the nature of research “on” versus “with” Indigenous peoples. Policies and programs designed to enhance Indigenous involvement and capacity must address these asymmetries in order to be representative, effective, and responsive to current Indigenous priorities.     

Identifying fecal pollution sources using 3M™ Petrifilm™ count plates and antibiotic resistance analysis in the Horse Creek Watershed in Aiken County,SC (USA)

Sources of fecal coliform pollution in a small South Carolina (USA) watershed were identified using inexpensive methods and commonly available equipment. Samples from the upper reaches of the watershed were analyzed with 3M^? Petrifilm^? count plates. We were able to narrow down the study’s focus to one particular tributary, Sand River, that was the major contributor of the coliform pollution (both fecal and total) to a downstream reservoir that is heavily used for recreation purposes. Concentrations of total coliforms ranged from 2,400 to 120,333 cfu/100 mL, with sharp increases in coliform counts observed in samples taken after rain events. Positive correlations between turbidity and fecal coliform counts suggested a relationship between fecal pollution and stormwater runoff. Antibiotic resistance analysis (ARA) compared antibiotic resistance profiles of fecal coliform isolates from the stream to those of a watershed-specific fecal source library (equine, waterfowl, canines, and untreated sewage). Known fecal source isolates and unknown isolates from the stream were exposed to six antibiotics at three concentrations each. Discriminant analysis grouped known isolates with an overall average rate of correct classification (ARCC) of 84.3 %. A total of 401 isolates from the first stream location were classified as equine (45.9 %), sewage (39.4 %), waterfowl (6.2 %), and feline (8.5 %). A similar pattern was observed at the second sampling location, with 42.6 % equine, 45.2 % sewage, 2.8 % waterfowl, 0.6 % canine, and 8.8 % feline. While there were slight weather-dependent differences, the vast majority of the coliform pollution in this stream appeared to be from two sources, equine and sewage. This information will contribute to better land use decisions and further justify implementation of low-impact development practices within this urban watershed.     

Monitoring fugitive dust emissions from off-highway vehicles traveling on unpaved roads and trails using passive samplers

Vehicles traveling on dry, unpaved roads generate copious quantities fugitive dust that contributes to soil erosion, and potentially threatens human health and ecosystems. The purpose of this study was to develop a low-cost technique for monitoring road dust that would enable land managers to estimate soil loss. The "sticky-trap" collectors developed were evaluated at the Turkey Bay off-highway vehicle (OHV) riding area on the Land Between the Lakes National Recreation Area, in western Kentucky. The results showed that the dust plume created by vehicle traffic was heterogeneous: larger particles were in the lower part of the plume and deposited closer to the source, smaller particles were carried higher in the plume and traveled at least 100 m away from the source. Collection of particles parallel to the source was also heterogeneous, suggesting that measurements taken at a single point may not be appropriate for estimating erosion losses. Measurements taken along two trails indicate that when large numbers of riders are present, dust concentrations may reach unhealthful conditions for riders, but that it is unlikely that fugitive dust is harming native vegetation, given frequent rainfall. The study demonstrated that OHV traffic contributes to substantial erosion of roadbeds because of aeolian transport.     

Two Measured Parameters Correlated to Participation Rates in Curbside Recycling Schemes in the UK

Local authorities in the United Kingdom are currently changing their approach towards recycling as they attempt to meet legislative targets. An important part of this drive is the provision of an effective curbside recycling service and it is vital to understand the parameters that influence the performance of the system offered. In this article, three primary datasets, collected from over 1400 households each, are examined for parameters correlated to participation rates. Two measured parameters were found that are not commonly identified in previous studies of curbside recycling schemes, and they are shown to merit further investigation as useful tools for planning purposes. One is the number of types of material collected; participation rates are greater for schemes collecting more materials. The second is the number of households situated on the same road; the lower the number, the higher the participation rate. In both cases, evidence of the measured correlation is presented, justifying their usefulness for planning. The multiple underlying factors causing the correlations are not identified here, but suggestions are made for further studies.     

Change in soluble phosphorus in soils following fertilization is dependent on initial Mehlich-3 phosphorus

There is a lack of information on how fertilization and initial Mehlich-3 phosphorus (M3P) interact to affect water soluble P (WSP) in soils. Our objectives were to (i) quantify the relationship between WSP and M3P for four textural diverse benchmark soils of North Carolina (NC) and (ii) quantify the change in WSP concentrations following P additions to soils over a wide range of initial M3P. Soils known to represent a wide range in M3P were collected from an Autryville loamy sand (loamy, siliceous, subactive, thermic Arenic Paleudults), Wasda muck (fine-loamy, mixed, semiactive, acid, thermic Histic Humaquepts), Georgeville silt loam (fine, kaolinitic, thermic Typic Kanhapludults), and Pacolet sandy clay loam (fine, kaolinitic, thermic Typic Kanhapludults) and analyzed for M3P, Fe, Al, and WSP. An incubation study was also conducted where four samples representing a range in M3P from each series were fertilized at rates of 150 and 300 kg P ha(-1), and WSP was measured at 1, 7, and 21 d after fertilization. The Wasda muck exhibited a change point at 115 mg P kg(-1) across a broad range of M3P concentrations (60-238 mg kg(-1)) while Autryville, Georgeville, and Pacolet series (with ranges in M3P of 32-328, 119-524, 0-1034 mg P kg(-1), respectively) maintained linear relationships between WSP and M3P. For the fertilized soils, significant increases in WSP occurred regardless of P rate. Yet, WSP concentrations were greater in soils with greater initial M3P. Thus, these data suggest that shifting animal waste applications to fields of relatively lower M3P concentrations would have an immediate impact on reducing risk for P losses, if all other factors are equal.     

Seasonal and diurnal variability in airborne mold from an indoor residential environment in northern New York

It is well known that characterization of airborne bioaerosols in indoor environments is a challenge because of inherent irregularity in concentrations, which are influenced by many environmental factors. The primary aim of this study was to quantify the day-to-day variability of airborne fungal levels in a single residential environment over multiple seasons. Indoor air quality practitioners must recognize the inherent variability in airborne bio-aerosol measurements during data analysis of mold investigations. Changes in airborne fungi due to varying season and day is important to recognize when considering health impacts of these contaminants and when establishing effective controls. Using an Andersen N6 impactor, indoor and outdoor bioaerosol samples were collected on malt extract agar plates for 18 weekdays and 19 weekdays in winter and summer, respectively. Interday and intraday variability for the bioaerosols were determined for each sampler. Average fungal concentrations were 26 times higher during the summer months. Day-to-day fungal samples showed a relatively high inconsistency suggesting airborne fungal levels are very episodic and are influenced by several environmental factors. Summer bio-aerosol variability ranged from 7 to 36% and winter variability from 24 to 212%; these should be incorporated into results of indoor mold investigations. The second objective was to observe the relationship between biological and nonbiological particulate matter (PM). No correlation was observed between biological and nonbiological PM. Six side-by-side particulate samplers collected coarse PM (PM10) and fine PM (PM2.5) levels in both seasons. PM2.5 particulate concentrations were found to be statistically higher during summer months. Interday variability observed during this study suggests that indoor air quality practitioners must adjust their exposure assessment strategies to reflect the temporal variability in bioaerosol concentrations.     

Approaches for quantifying reactive and low-volatility biogenic organic compound emissions by vegetation enclosure techniques - part B: applications

The focus of the studies presented in the preceding companion paper (Part A: Review) and here (Part B: Applications) is on defining representative emission rates from vegetation for determining the roles of biogenic volatile organic compound (BVOC) emissions in atmospheric chemistry and aerosol processes. The review of previously published procedures for identifying and quantifying BVOC emissions has revealed a wide variety of experimental methods used by various researchers. Experimental details become increasingly critical for quantitative emission measurements of low volatility monoterpenes (MT) and sesquiterpenes (SQT). These compounds are prone to be lost inadvertently by uptake to materials in contact with the sample air or by reactions with atmospheric oxidants. These losses become more prominent with higher molecular weight compounds, potentially leading to an underestimation of their emission rates. We present MT and SQT emission rate data from numerous experiments that include 23 deciduous tree species, 14 coniferous tree species, 8 crops, and 2 shrubs. These data indicate total, normalized (30 degrees C) basal emission rates from <10 to 5600ngCg(-1)h(-1) for MT, and from <10 to 1150ngCg(-1)h(-1) for SQT compounds. Both MT and SQT emissions have exponential dependencies on temperature (i.e. rates are proportional to e(betaT)). The inter-quartile range of beta-values for MT was between 0.12 and 0.17K(-1), which is higher than the value commonly used in models (0.09K(-1)). However many of the MT emissions also exhibited light dependencies, making it difficult to separate light and temperature influences. The primary light-dependent MT was ocimene, whose emissions were up to a factor of 10 higher than light-independent MT emissions. The inner-quartile range of beta-values for SQT was between 0.15 and 0.21K(-1).