地质体中稀土金属元素的分析

尽管分析钇和镧系元素很困难,但人们至今仍有广泛兴趣并继续对其进行研究。用中子活化和X射线光谱仪器分析技术来测定地质体中的稀土元素需成本太高,而色层法在这方面所做的工作又是很少的。 最近,电泳法却提供了准确且成本低廉的分析。 艾艾特泽姆勒等应用高压电泳在移行距离为13厘米的醋酸脂薄膜上对所有15个镧系元素成功地进行了分离。有效分离的“持续时间”为4小时或4个多小     

Removal of copper from a copper sulphate solution using an ultrasonic-electrolysis process

The application of ultrasonic-electrolysis process for the removal of copper is studied.In the ultrasonic field cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution.Thus increases metal deposition on the cathode surface.The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

A model describing the complexing effect in the leaching of aluminum from cooking utensils

A simple model describing the complexing effect in the leaching of aluminum from cooking utensils is presented in this paper. Some experimental results obtained by previous workers may be explained by this model, which demonstrates that the complexing effect takes a very important role in the process of aluminum liberated from cooking utensils. Increased concentrations of complexing ions (organic acids, fluoride ion, OH-, etc.) significantly enhance the release of aluminum. The speciation of aluminum in simulated food solution is also investigated. The model suggests that in the pH range of most food (pH 4-8) aluminum present is predominantly in the form of organic Al-complexes, which is harmful to the human body.     

The uptake of particulates by an urban woodland: site description and particulate composition

Woodlands may improve local air quality by increasing the uptake rates of gaseous, particulate and aerosol pollutants from the atmosphere and can also act as relatively permanent sinks for some pollutants. Rough Wood, Walsall was selected for a study of the material which accumulates on tree foliage because of its location in a densely populated urban area, and its proximity to a motorway with high traffic flow (the M6) and to other pollutant sources. Methods were developed for leaf washing to allow determination of the quantity of dust and the identification of the dust particles present on oak leaves. Elemental analysis of particles was also undertaken using scanning electron microscopy coupled with electron probe microanalysis. A large proportion of particles were organic in origin. Of the inorganic particles, the majority contained silicon and aluminium in varying proportions suggesting that they were soil derived. Some particles were clearly identified as the products of combustion, and sea or road salt was present on leaf surfaces. Some particles contained copper, tin and titanium which may reflect the proximity of Rough Wood to local metal workings. The number of particles counted on leaf surfaces decreased as distance from the motorway increased.     

Mute swans, Cygnus olor, killed from collision with electrical wires, a study of two situations in Sweden

Different studies indicate that 19-38% of the Swedish ringed Mute Swans (Cygnus olor) are killed by collision with electrical wires. The relative frequency of killed swans is not related to the density or type of electrical wires in the landscape, but to where in the landscape the wires are constructed, and to the time when mass movements of swans occur. Experience (age), bodyweight ("too heavy to raise"), breast muscle weakening ("engine problems") and heavy metal (lead) loads strongly affect the chances of birds avoiding collision; but, swans not belonging to these risk-groups are also killed. Different skeletal injuries were found in dead birds after collision but many of them were not lethal. It was proved, however, that most collision-birds ultimately died from liver damage, probably caused by their heavy bodies hitting the ground.     

Effects of population density and cadmium toxicity on growth and survival of blowflies

The blowfly Lucilia sericata has been reared on artificial diets containing from 0 to 200 mg Cd kg(-1) at population densities ranging from 8 larvae per 4-g diet to 8 larvae per 32-g diet. Peak larval weight, development period, pupal weight, adult-emergence weight, and fecundity were measured. Larvae of blowflies respond to food deprivation by a reduction in larval weight and subsequent pupal and adult size. Contaminating the food supply with cadmium produced similar additive effects, reduced the growth rate, and increased the age of pupation. The results are of importance in determining the effects of environmental pollutants on population dynamics.     

Susceptibility of different yeast species to environmental toxic metals

The purpose of the study reported here was to investigate the relative resistance of yeast species to various metallic and metalloid ions, with a view to gaining more knowledge on this subject, as resistant species may become dominant in habitats contaminated with the relevant metals. Saccharomyces cerevisiae, Candida albicans and Candida tropicalis were grown in media containing different concentrations of mercury (as HgCl(2)), cadmium (as CdCl(2)), lead (as Pb(CH(3)COO)(2)), arsenic (as Na(2)HAsO(4)) and selenium (as Na(2)SeO(3)) for various intervals. Invariably, the two Candida species turned out to be more resistant to all the metals studied than S. cerevisiae. The metal showing the highest toxicity for these species was mercury, with cadmium being the second, lead, the third and arsenic and selenium being the least toxic elements. Strains showing resistance to mercury were isolated, even in the case of S. cerevisiae.     

Socio-economic Comparison Between Traditional and Improved Cultivation Methods in Agroforestry Systems, East Usambara Mountains, Tanzania

The East Usambara Mountains, recognized as one of the 25 most important biodiversity hot spots in the world, have a high degree of species diversity and endemism that is threatened by increasing human pressure on resources. Traditional slash and burn cultivation in the area is no longer sustainable. However, it is possible to maintain land productivity, decrease land degradation, and improve rural people’s livelihood by ameliorating cultivation methods. Improved agroforestry seems to be a very convincing and suitable method for buffer zones of conservation areas. Farmers could receive a reasonable net income from their farm with little investment in terms of time, capital, and labor. By increasing the diversity and production of already existing cultivations, the pressure on natural forests can be diminished. The present study shows a significant gap between traditional cultivation methods and improved agroforestry systems in socio-economic terms. Improved agroforestry systems provide approximately double income per capita in comparison to traditional methods. More intensified cash crop cultivation in the highlands of the East Usambara also results in double income compared to that in the lowlands. However, people are sensitive to risks of changing farming practices. Encouraging farmers to apply better land management and practice sustainable cultivation of cash crops in combination with multipurpose trees would be relevant in improving their economic situation in the relatively short term. The markets of most cash crops are already available. Improved agroforestry methods could ameliorate the living conditions of the local population and protect the natural reserves from human disturbance.     

Assessment of Soil Erodibility Indices for Conservation Reserve Program Lands in Southwestern Kansas Using Satellite Imagery and GIS Techniques

The soil erodibility index (EI) of Conservation Reserve Program (CRP) lands, which was the major criterion for CRP enrollment, was assessed for six counties in southwestern Kansas using USGS seamless digital elevation model data and Geographical Informational System techniques. The proportion of land areas with EI values of 8 or lower was less than 1% of the entire study area and most of the land areas (72.5%) were concentrated on EI values between 8 and 24. Although land acreage with EI values of 24 or higher decreased dramatically, the proportion of CRP lands to the other land-use types did not change much from low to high EI levels. The soil EI and physical soil characteristics of the CRP lands were compared to those of other land-use types. In general, the mean EI values of the land-use types were strongly correlated with physical soil properties, including organic matter content, clay content, available water capacity, permeability, and texture. CRP lands were compared in detail with cropland in terms of their soil characteristics to infer the pivotal cause of the land transformation. Although there was no significant statistical difference in EI between cropland and CRP soils, soil texture, soil family, and permeability were statistically different between the two. Statistical analyses of these three variables showed that CRP soils had coarser texture and higher permeability on average than cropland soils, indicating that CRP lands in the study area are drier than cropland soils. Therefore, soil moisture characteristics, not necessarily soil erosion potential, might have been the key factor for CRP enrollment in the study area.