Foliar response of black cherry (Prunus serotina) clones to ambient ozone exposure in central Pennsylvania

During late summer of 1996 and 1997 we examined ozone-induced foliar injury in a plantation of 111 black cherry trees (ramets) comprising 15 clones originating from wild ortets growing in the Allegheny National Forest, Pennsylvania, and the Monongahela National Forest, West Virginia. The experimental plantation was a clonal seed orchard in Centre County, Pennsylvania, started in 1971 using ortet buds grafted onto seedling rootstocks of mixed origin. Clones differed significantly in severity of foliar injury symptoms (F=31.83, p<0.001). One clone (R-12) had significantly more foliar injury with >50% leaf area affected than other clones during both years. In contrast, clone R-14, which is from the same area in northcentral Pennsylvania as R-12, exhibited significantly less injury (LAA<6%). Although ambient O(3) concentrations were similar in both years, foliar injury was significantly greater (15.7%) in 1996 than in 1997 (9.9%). This is probably explained by lower stomatal conductance in 1997 caused by drier and hotter weather patterns in June and July of that year. Despite very different weather patterns and overall levels of injury in 1996 and 1997, mean clonal injury was significantly correlated between both years of assessment (r=0.92, p<0.001). Within tree crowns, foliage in lower and inner crown positions was significantly more injured than foliage in upper and exterior crown positions. There was no evidence of geographically based population differences in sensitivity to foliar O(3) injury. On the contrary, results demonstrate that wild genotypes of proximal geographic origin may differ greatly in sensitivity.     

PM2.5 chemical source profiles for vehicle exhaust, vegetative burning, geological material, and coal burning in Northwestern Colorado during 1995

PM_2.5 (particles with aerodynamic diameters less than 2.5 μm) chemical source profiles applicable to speciated emissions inventories and receptor model source apportionment are reported for geological material, motor vehicle exhaust, residential coal (RCC) and wood combustion (RWC), forest fires, geothermal hot springs; and coal-fired power generation units from northwestern Colorado during 1995. Fuels and combustion conditions are similar to those of other communities of the inland western US. Coal-fired power station profiles differed substantially between different units using similar coals, with the major difference being lack of selenium in emissions from the only unit that was equipped with a dry limestone sulfur dioxide (SO₂) scrubber. SO₂ abundances relative to fine particle mass emissions in power plant emissions were seven to nine times higher than hydrogen sulfide (H₂S) abundances from geothermal springs, and one to two orders of magnitude higher than SO₂ abundances in RCC emissions, implying that the SO₂ abundance is an important marker for primary particle contributions of non-aged coal-fired power station contributions. The sum of organic and elemental carbon ranged from 1% to 10% of fine particle mass in coal-fired power plant emissions, from 5% to 10% in geological material, >50% in forest fire emissions, >60% in RWC emissions, and >95% in RCC and vehicle exhaust emissions. Water-soluble potassium (K⁺) was most abundant in vegetative burning profiles. K⁺/K ratios ranged from 0.1 in geological material profiles to 0.9 in vegetative burning emissions, confirming previous observations that soluble potassium is a good marker for vegetative burning.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

Efficacy of vegetated buffer strips for retaining Cryptosporidium parvum

Overland and shallow subsurface hydrologic transport of pathogenic Cryptosporidium parvum oocysts from cattle feces into surface drinking water supplies is a major concern on annual grasslands in California's central and southern Sierra Nevada foothills. Soil boxes (0.5 m wide x 1.1 m long x 0.3 m deep) were used to evaluate the ability of grass vegetated buffer strips to retain 2 x 10(8) spiked C. parvum oocysts in 200-g fecal deposits during simulated rainfall intensities of 30 to 47.5 mm/h over 2 h. Buffers were comprised of Ahwahnee sandy loam (coarse-loamy, mixed, active, thermic Mollic Haploxeralfs; 78:18:4 sand to silt to clay ratio; dry bulk density = 1.4 g/cm(3)) set at 5 to 20% land slope, and >/=95% grass cover (grass stubble height = 10 cm; biomass = 900 kg/ha dry weight). Total number of oocysts discharged from each soil box (combined overland and subsurface flow) during the 120-min simulation ranged from 1.5 x 10(6) to 23.9 x 10(6) oocysts. Observed overall mean log(10) reduction of total C. parvum flux per meter of vegetated buffer was 1.44, 1.19, and 1.18 for buffers at 5, 12, and 20% land slope, respectively. Rainfall application rate (mm/h) was strongly associated with oocyst flux from these vegetated buffers, resulting in a decrease of 2 to 4% in the log(10) reduction per meter buffer for every additional mm/h applied to the soil box. These results support the use of strategically placed vegetated buffers as one of several management strategies that can reduce the risk of waterborne C. parvum attributable to extensive cattle grazing on annual grassland watersheds.     

The fly ash influenced the heavy metal status of the soil and the seeds of sunflower. A case study

In this study, four cultivars of sunflower (Helianthus annuus) were grown in the sandy loam soil, supplemented with graded (v/v) quantity (0, 20, 40, 60, 80, 100%) of the fly ash, released by the combustion of the coal from the thermal power plant. The presence of fly ash in the soil increased its porosity, water holding capacity, pH, E.C., C.E.C., the content of sulphate, carbonate, bicarbonate, chloride, phosphorus, potassium, calcium and various trace elements. However, in the seeds, except Fe, Pb, Mn and Zn, and other heavy metals remained untraced up to 40% of the fly ash, above that their quantity slightly increased but the values are very much under the permissible limits.     

Synergistic effects of combination of photolysis and ozonation on destruction of chlorophenols in water.

Synergistic effects including TOC elimination, ozone consumption and microtoxicity reduction for combination of photolysis and ozonation compared to those of direct photolysis and ozonation alone on destruction of chlorophenols including 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol were studied. It was found that the synergistic effects of combination of photolysis and ozonation increased obviously with increasing initial pH of solution to basic pH levels. Results showed that the synergistic effects of photolytic ozonation under the conditions imposed was notable with mineralization rate enlarging more than 100%, oxidation index (OI) decreasing 50%, and microtoxicity being reduced by 30%, indicating that the potentialities of photolytic ozonation compared to direct photolysis and ozonation alone was remarkable for treatment of industrial wastewater containing chlorophenols.     

Spectrophotometric determination of sulphur dioxide

Sulphur dioxide, an important industrial gas and air pollutant, is usually estimated using mercury salts. The authors have developed a method in which hazardous mercury salts are avoided. Sulphur dioxide is trapped in aqueous morpholine and mixed with the excess of dichromate solution in acidic medium. The hexavalent chromium in dichromate is reduced to trivalent chromium by sulphur dioxide and the excess of hexavalent chromium is determined with diphenylcarbazide which yields a soluble red-violet complex with an absorption maximum at 540 nm. The decrease in the absorbance values of the red-violet complex formed after reduction, when compared to that of a reagent control, is proportional to the concentration of sulphur dioxide used for reduction. Beer's law operates between 0.4 and 4 microg ml(-1) concentration of sulphur dioxide in solution.     

Removal of BTEX vapor from waste gases by a trickle bed biofilter

The system performance of a trickle bed biofilter for treating single and mixed benzene, toluene, ethylbenzene, and o-xylene (BTEX) vapors from waste gases was investigated under different gas flow rates and influent BTEX concentrations. When a single substrate was fed, removal efficiencies of greater than 90% could be achieved for the loads below 64 g benzene/m3/hr, 110 g toluene/m3/hr, 53 g ethylbenzene/m3/hr, and 55 g o-xylene/m3/hr. When a mixed substrate was fed, removal efficiencies of each compound could be above 90% at BTEX loads below 96 g/m3/hr. The trickle bed biofilter appears to be an effective treatment process for removing both single and mixed BTEX vapors with low to high loads. Under similar substrate loads, BTEX vapors were preferentially biodegraded in the order of toluene, benzene, o-xylene, and ethylbenzene. The volumetric removal rates (elimination capacities) of BTEX vapors for a single-substrate feed were higher than those for a mixed-substrate feed under similar substrate loads; these differences were enhanced at higher substrate loads and less significant for a preferred substrate.     

The use of amino compounds for binding 2,4,6-trinitrotoluene in water

Sites polluted with 2,4,6-trinitrotoluene (TNT) constitute a worldwide problem. In this work, chemical reactions for binding TNT to amino-compounds are proposed as an initial step for developing new remediation techniques to clean-up groundwater and soils contaminated with TNT. Indeed, addition of aniline and an amino acid-like cysteine caused a decrease in free TNT of 86% and 68-100%, respectively. Using 13C-NMR spectroscopy, it was shown that TNT chemically forms a Meisenheimer complex with cysteine and aniline in 1/1 (by vol.) H2O/d6-acetone.