Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

执行国际协定的限制因素:博茨瓦纳执行《蒙特利尔议定书》的情况

本文分析了在博茨瓦纳有效执行<蒙特利尔议定书>中遇到的困难;并就在发展中国家执行国际协定问题时如何向决策者提出建议提供了一个总的认识.对臭氧耗损物质(ODSs)的正式和非正式用户进行的问卷调查表明:所散发的有关ODSs的信息,对于用户们选择制冷气体几乎没有什么影响,而且这个信息偏向有利于ODSs的正式用户.因此,ODS使用数量的年统计资料可能估计偏低.困难在于,要在短期内从老技术转向新技术,成本较高.回收废气和处理废旧硬件设备的基础设施缺乏或不足.这些问题的解决需要一个全面的政策,它能满足所有ODSs用户的要求;还需要把经济发展与环境保护结合起来进行考虑.     

坦桑尼亚霞水母章鱼(Octopus cyanea Gray)的个体渔业

2000年4月期间坦桑尼亚霞水母章鱼(1849)个体渔业的初步结果到2001年6月才被提供.对在坦噶、马菲亚岛和姆特瓦拉三地的2546个单个渔获物和15 473个样品进行了分析.     

The effect of catch crops on sulphate leaching and availability of S in the succeeding crop on sandy loam soil in Denmark

Sulphate leaching losses may reduce the long-term possibility of maintaining the S supply of crops in low input farming systems. The ability of catch crops (Italian ryegrass (Lolium multiflorum Lam), winter rape (Brassica napus L.) and fodder radish (Raphanus sativus L.)) to reduce soil sulphate concentrations in autumn and make it available to a succeeding crop was investigated in 1996–1998 on sandy loam soil in Denmark. All catch crops reduced soil sulphate concentrations in the autumn compared to bare soil. Especially, the cruciferous catch crops had the ability to deplete efficiently soil sulphate levels and thus, reduce the sulphate leaching potential. The S uptake in aboveground catch crop was 8, 22 and 36 kg S per ha for ryegrass, winter rape and fodder radish, respectively. In the following spring, sulphate levels of the autumn bare soil were low in the top 0.5 m and a peak of sulphate was found at 0.75–1 m depth. In contrast, where a fodder radish catch crop had been grown, high sulphate levels were present in the top 0.5 m, but only small amounts of sulphate were found at 0.5–1.5 m depth. In spring barley (Hordeum vulgare L.), that followed catch crops, S concentrations at heading and maturity revealed that the availability of soil S increased following winter rape and fodder radish, whereas there were indications that following ryegrass, the S availability was reduced compared to bare soil. This initial study showed that catch crops have a high potential for reducing sulphate leaching and may be used to synchronise S availability with plant demand in a crop rotation.     

不锈钢壳体的冷挤压工艺及模具设计

壳体是机械中广泛使用的重要零件之一.采用冷挤压工艺可提高质量、降低成本.对不锈钢壳体成形工艺及模具设计作了详细讨论.     

Protein that makes sense in the Argentine ant

With a protein-based approach, we have identified and cloned the cDNA encoding a chemosensory protein (LhumCSP) in the Argentine ant, Linepithema humile. The open reading frame of the cloned cDNA encoded a signal peptide (20 residues), and a mature protein (pI 4.62) of 106 amino acid residues. The calculated molecular mass (12,453 Da) was in agreement with the molecular mass measured by on-line chromatography-electrospray ionization mass spectrometry (12,448 Da), given the formation of two disulfide bridges. LhumCSP shared sequence similarity with various CSPs, particularly those identified and/or cloned from moth species. Also, LhumCSP showed the hallmark of the chemosensory proteins, i.e., four well conserved cysteine residues. The antennal protein was not detected in non-olfactory tissues (leg and thorax) contrary to a putative pheromone-binding protein isolated from the thorax of the red imported fire ant, Solenopsis invicta. In addition, these findings suggest that, as in Orthopterans and Phasmids, the protein that makes sense in the Argentine ant is not an odorant-binding protein, but rather a chemosensory protein.     

Uranium enrichment by the separation-nozzle process

The Science of Nature - The development of reliable manufacturing methods for commercial separation elements, the successful operation of separative stages, and extensive tests performed on plant...     

Ecoprofit-Styria-prepare Thirteen pollution prevention case studies in the Styrian industry

The paper focuses upon the organization of a federal state-funded pollution prevention project in the Styrian industry. The project includes 13 companies from the textile, pulp and paper, machine building, wood working and printed circuit board manufacturing industries, covering most of the sectors and sizes in the Styrian industry. It started in January 1994 and will last for one year. It will demonstrate the possibilities of pollution prevention and the need for further research work. This project will make use of the methods and tools that were refined in the Austrian Prepare project. As a first step, a systematic balance of all the inputs and outputs of a company is made, after which the weak points and inefficiencies of material and energy use are identified and the options for improvements, both economical and ecological, are defined. Consequently, modifications in products and production lead to a situation with less waste and emissions. The preliminary lessons from these projects are presented: as a rule, the utilities (consumption of process materials and water, cleaning, energy, preparatory and finishing steps) are treated as black boxes and usually represent a considerable optimization potential. In these areas especially there is usually a lack of information and coordination as well as a need for a systematic and comprehensive approach. Leadership in the company and creative consultants are needed for starting lasting successful pollution prevention projects.