Water transformation in the media of biofilters controlled by Rhodococcus fascians in treating an ethyl acetate-contaminated airstream

Biofilters do not provide much water for bacteria to grow. To use them efficiently and properly, it is essential to understand the kinetics of water transformation and to control moisture levels. This study aims to clarify whether the metabolism of microorganisms will improve the water-holding capacity of media or will intensify drying. This experiment was conducted in duplicate, that is, both with and without bacterial inoculation. Both the constant water content mode and the declining water content mode show that microbial growth in a log phase will enhance drying. In contrast, the bacteria growing in a logarithmic decline phase will improve water-holding capacity. Basically, water evaporation can result from the latent heat obtained from microbial respiration or from the physical temperature difference between the unsaturated air and the wet media. Two ways that biofilters can gain water are from water incorporated into bacteria cells and from water obtained from the oxidation of volatile organic compounds (VOCs).     

Formation and emission status of PCDDs/PCDFs in municipal solid waste incinerators in Korea

This study was carried out to examine the formation and the emission status of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDDs/PCDFs) in the flue gases of commercial-scale municipal solid waste (MSW) incinerators, and thus to provide the engineering data for the reduction of PCDDs/PCDFs emitted from MSW incinerators. The formation concentrations of the PCDDs/PCDFs generated at the outlet of waste heat boilers (WHB) were in the range of 1.18-29.61 ng-TEQ/N m3 (average 5.75 ng-TEQ/N m3), while the emission concentrations at the stacks were in the range of 0.026-4.548 ng-TEQ/N m3 (average 0.924 ng-TEQ/N m3). Two major 2,3,7,8-substituted congeners were 2,3,4,7,8-PeCDF and 2,3,4,6,7,8-HxCDF, and their concentrations were up to 50% and 64% of total TEQ values at the outlet of WHB and the stack, respectively. From the results of multi-regression analysis, the formation concentration of PCDDs/PCDFs could be predicted as follows with the correlation factor of r2 = 0.962: PCDDs/PCDFs (ng-TEQ/N m3) = 3.036 (Cl) + 0.094 (T1) - 0.472 (Combustibles) + 0.059 (CO) - 0.039 (THC) - 3.366 (H) + 22.157, where T1 (degrees C) is the temperature at the outlet of the WHB. Cl, Combustibles and H are given as percentages and the others are in parts per million.     

Evaluation of TCDD biodegradability under different redox conditions

Polychlorinated dibenzo-p-dioxins have been generated as unwanted by-products in many industrial processes. Although their widespread distribution in different environmental compartments has been recognized, little is known about their fate in the ultimate environment sinks. The highly stable dioxin isomer 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) has been called the most toxic compound known to man. In this laboratory microcosm study, TCDD bioavailability was evaluated under five reduction/oxidation (redox) conditions including aerobic biodegradation, aerobic cometabolism, methanogenesis, iron reduction, and reductive dechlorination. Activated sludge and aquifer sediments from a TCDD and a pentachlorophenol (PCP) contaminated site were used as the inocula. Acetate, sludge cake, and cane molasses were used as the primary substrates (carbon sources) in cometabolism and reductive dechlorination microcosms. After a 90-day incubation period, microcosms constructed under reductive dechlorination conditions were the only treatment showing promising remediation results. The highest TCDD degradation rate [up to 86% of TCDD removal (with an initial concentration of 96 microg/kg of soil)] was observed in the microcosms with anaerobic activated sludge as the microbial inocula and sludge cakes as the primary substrates. Except for reductive dechlorination microcosms, no significant TCDD removal was observed in the microcosms prepared under other conditions. Thus, application of an effective primary substrate to enhance the reductive dechlorination process is a feasible method for TCDD bioremediation. Bioremediation expense can be significantly reduced by the supplement of some less expensive alternative substrates (e.g., sludge cakes, cane molasses). Results would be useful in designing a scale-up in situ or on-site bioremediation system such as bioslurry reactor for field application.     

Coating effects on the glass adsorption of polychlorinated biphenyl (PCB) congeners

The effects of coating materials on polychlorinated biphenyl (PCB) adsorption in aqueous solution were assessed in an attempt to minimize PCB sorption loss during sampling processes. A coating material, which enhances PCB adsorption and allows adsorbed PCBs to be readily extracted by solvents, can act as a sampling concentrator to reduce PCB losses from both adsorption and evaporation. Several coating materials were evaluated, including paraffin oil, silicone oil, dimethyldichlorosilane (Sylon-CT), Prosil 28^® and polydimethylsiloxane (PDS) with viscosity 0.65, 50 (PDS 50), and 500 (PDS 500) cSt. PDS and silicone oil enhanced adsorption for all five congeners examined (IUPAC No. 28, 52, 101, 138, and 180). Sylon-CT, paraffin oil and Prosil 28^® had inconsistent effects on adsorption of different congeners. Desorption of adsorbed PCBs onto all coating types was assessed. The recovery efficiency of extracting PCBs with solvents was enhanced greatly with all coatings as opposed to non-coated surfaces, with the exception of paraffin oil. Coating with silicon oil, PDS 50, and 500 resulted in virtually 100% recovery of adsorbed PCBs. It was also found that Teflon containers were poor substitutes for glass containers and failed to minimize PCB losses. Among the materials studied, the best coating that could be used as a sampling concentrator was PDS 500.     

The study of fine and coarse particles, and metallic elements for the daytime and night-time in a suburban area of central Taiwan, Taichung

Daily average concentrations of fine and coarse particulates, and TSP samples have been measured simultaneously at daytime and night-time periods by using Universal and PS-1 sampler in a suburban area of central Taiwan from June to August 1998. The samples were analyzed by atomic absorption spectrometry to determine the fine and coarse particulate concentrations of metallic elements (Ca, Fe, Mn, Pb, Cu, Zn and Cr). The concentration of PM2.5 and TSP showed a decreased trend for the daytime period. The fine particle concentrations were about two times as that of coarse particulate concentrations. The averaged fine particulate concentrations at daytime are higher than at night-time. Ca and Fe were mostly in the coarse particulate mode. The correlation coefficients were 0.63 and 0.69 for elements Ca and Fe in the coarse particle mode for day and night periods. Pb showed a similar distribution ratio with Mn for the fine to coarse particle ratios at both day and night period. Pb and Mn are highly correlated for the day (R = 0.78) and night period (R = 0.61) at particle size <2.5 microm. Cu and Zn were mainly in fine particles at both day and night period. Fe and Ca consist of the major parts of all the elements. Elemental Mn is the lowest among the rest of the heavy metals.     

Vegetation composition of roadside verges in Scotland: the effects of nitrogen deposition, disturbance and management

Vehicular emissions of NO(x) and NH(3) result in elevated concentrations of nitrogen at roadside verges. To determine the extent that vehicular nitrogen emissions, disturbance and management affect the vegetation composition of road verges, a survey of 92 verges in Scotland was carried out with sites stratified by background nitrogen deposition and road type. NO(x) and NH(3) concentrations were monitored at 15 key sites for a year, and showed a decreasing gradient with increasing distance from the road. Ellenberg fertility indices of the vegetation communities also showed a general decrease with increasing distance from the road, but there was no straightforward correlation with NO(x) and NH(3) air concentrations between sites. Cover of bare ground, ruderal species and salt-tolerant species were highest at the verge edge. The proximity of the verge to traffic is important both in terms of NO(x) and NH(3) gradients, but also for deposited salt, grit and physical disturbance.     

Simulation of 1-year-old Populus tremuloides response to ozone stress at Ithaca, USA, and Suwon, Republic of Korea

The growth of 1-year-old aspen was simulated using TREGRO, a computer simulation model of individual tree growth, to assess potential effects of ozone (O3). TREGRO was parameterized using information from a field experiment conducted at Ithaca, NY, USA; the model was then applied using environmental information from Suwon, Korea, where O3 exposures of aspen had not been conducted. In the parameterization at Ithaca, the simulated and measured total biomass differed by about 3% and the differences between measured and simulated biomass gain of leaf, shoot, and root were 15.4, 8.3, and 4.4%, respectively. Simulating growth at Suwon required adjustment in growth rates to match measured growth due to the different weather conditions at the two cities. The assimilated carbon was evenly distributed to each tissue (foliage, branch, stem, coarse, fine roots) in Suwon, whereas it was mainly allocated to vigorous stem growth in Ithaca. The vigorous growth under Suwon conditions resulted in less total non-structural carbon and perhaps trees more vulnerable to O3 stress. Although the ambient O3 in Suwon (1.2 ppm.h of sum of the hourly concentrations greater than 0.06 ppm [SUM06]) was lower than that in Ithaca (2.1 ppm.h of SUM06), a reduction of 8% of total assimilated carbon was found compared to simulation without O3. Severe effects on root growth at elevated O3 (1.7 times ambient) were predicted; however, the effects on leaf growth would not be as severe.     

环境空气中SO_2监测技术探讨

随着社会经济及科技的快速发展,环境监测手段日益现代化,各种自动监测仪正在被各级环境监测机构陆续采用。环境空气中重要指标SO2的监测方法也由原来的瞬时采样变成连续自动采样,但一直以来,环境空气中SO2的监测存在着低浓度SO2测试结果偏低等技术难题,文中从环境样品的采集环节、实验环节等方面分析了影响环境空气中SO2监测结果的一些原因或可能。     

Response of antibiotics and resistance genes to high-intensity and low-intensity manure management

The purpose of this study was to determine the response of antibiotics and antibiotic resistance genes (ARG) to manure management. A pilot field study was conducted using horse manure containing no antibiotics, into which chlortetracycline (CTC), tylosin (TYL), and monensin (MON) were spiked and compared to unspiked controls. Subsequently, a large-scale field study was conducted comparing manure from a dairy with minimal use of antibiotics and a feedlot with regular subtherapeutic use of antibiotics. The manures were subjected to high-intensity management (HIM) (amending, watering, and turning) and low-intensity management (LIM) (no amending, watering, or turning) and were monitored for antibiotic concentrations and levels of tetracycline ARG [tet(W) and tet(O)] using quantitative real-time polymerase chain reaction. All three antibiotics in the pilot study dissipated more rapidly in HIM manure, with half-lives ranging from 4 to 15 d, compared to LIM manure, with half-lives ranging from 8 to 30 d. Levels of tet(W) were significantly higher after 141 d of treatment, but levels of tet(O) were significantly lower in all treatments. In the large-scale study, the feedlot manure had higher initial concentrations than the dairy manure of tetracycline (TC), oxytetracycline (OTC), and CTC as well as tet(W) and tet(O). Tetracycline and OTC dissipated more rapidly in HIM manure, with half-lives ranging from 6 to 15 d, compared to LIM manure, with half-lives ranging from 7 to 31 d. After 6 mo of treatment, tet(W) and tet(O) decreased significantly in feedlot manure, whereas dairy manure required only 4 mo of treatment for similar results.