The study of metal contamination in urban soils of Hong Kong using a GIS-based approach

The study of regional variations and the anthropogenic contamination by metals of soils is very important for environmental planning and monitoring in urban areas. An extensive survey was conducted in the highly urbanized Kowloon area (46.9 km(2)) of Hong Kong, using a systematic sampling strategy with a sampling density of 3-5 composite soil samples (0-15 cm) per km(2). Geochemical maps of 'total' metals (Cd, Cr, Cu, Ni, Pb and Zn) from strong acid extraction in the surface soils were produced based on geographical information system (GIS) technology. A significant spatial relationship was found for Ni, Cu, Pb and Zn in the soils using a GIS-based analysis, suggesting that these metal contaminants in the soils of the Kowloon area had common sources. Several hot-spot areas of metal contamination were identified from the composite metal geochemical map, mainly in the old industrial and residential areas. A further GIS analysis revealed that road junctions, major roads and industrial buildings were possible sources of heavy metals in the urban soils. The Pb isotope composition of the contaminated soils showed clear anthropogenic origins.     

Effects of NO2 and SO2 on selective catalytic reduction of nitrogen oxides by ammonia

The selective catalytic reduction (SCR) characteristics of NO and NO(2) over V(2)O(5)-WO(3)-MnO(2)/TiO(2) catalyst using ammonia as a reducing agent have been determined in a fixed-bed reactor at 200-400 degrees C. The presence of NO(2) enhances the SCR activity at lower temperatures and the optimum ratio of NO(2)/NO(x) is found to be 0.5. During the SCR reactions, there are some side reactions occurred such as ammonia oxidation and N(2)O formation. At higher temperatures, the selective catalytic oxidation of ammonia and the nitrous oxide formation compete with the SCR reactions. The denitrification (DeNO(x)) conversion decreases at lower temperatures but it increases at higher temperatures with increasing SO(2) concentration. The presence of SO(2) in the feeds inhibits N(2)O formation.     

Ammonia emission factors for N fertilizers applied to two contrasting grassland soils

Ammonia volatilization from nitrogen (N) fertilizer applied throughout the year to two soil types was measured using a system of small wind tunnels. Losses from urea ranged from 12 to 46% of the applied N. Small losses, averaging <1%, were measured from ammonium nitrate (AN) and calcium nitrate applications. Factors influencing these losses are discussed. Using these results and those from other workers, emission factors for urea and AN applications to grassland in the UK were determined as 23.0 and 1.6% of the applied N, respectively. Emission factors for these fertilizers when applied to arable land were estimated as 11.8 and 0.8%, respectively. The emission factor for all other applied N (as straight and compound fertilizers) was assumed to be similar to that for AN. Calculations showed that fertilizer applications to agricultural land in the UK contributes 34 kt NH3-N per year, equivalent to 17% of the total annual NH3 emission.     

The impact of production type and region on polychlorinated biphenyl (PCB), polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations in Canadian chicken egg yolks

Chicken eggs from five different production types (conventional, omega-3 enriched, free range, organic and free run) were collected, when available, from three regions (west, central and east) of Canada to determine persistent organic pollutant (POP) concentrations. Total polychlorinated biphenyl (PCB) concentrations (∑37 congeners) in yolks from the eggs ranged from 0.162 ng g⁻¹ lipid to 24.8 ng g⁻¹ lipid (median 1.25 ng g⁻¹ lipid) while the concentration of the sum of the 6 indicator PCBs ranged from 0.100 ng g⁻¹ lipid to 9.33 ng g⁻¹ lipid (median 0.495 ng g⁻¹ lipid). Total polychlorinated dibenzo-p-dioxin/dibenzofuran (PCDD/F) concentrations ranged from 2.37 pg g⁻¹ lipid to 382 pg g⁻¹ lipid (median 9.53 pg g⁻¹ lipid). The 2005 WHO toxic equivalency (TEQ) ranged from 0.089 pg TEQ_{PCDD/F+dioxin-like[DL]-PCB} g⁻¹ lipid to 12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid (median 0.342 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). PCB and PCDD/F concentrations were significantly different (p < 0.001) in egg yolks from different regions of collection. In contrast to observations in Europe, PCB and PCDD/F concentrations in Canadian egg yolks were not impacted solely by the production type (e.g., conventional, free range, organic, etc.) used to maintain the laying chickens. Additionally, only one Canadian free range yolk from western Canada (12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid) exceeded the European toxic equivalent concentration limits for eggs (5 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). This differs from observations in Europe where free range/home produced eggs frequently have higher POP concentrations than eggs from other production types. Median PCB dietary intake estimates based on consumption of eggs were less than 10 ng d⁻¹ while median PCDD/F intakes were less than 45 pg d⁻¹.     

Enhanced photocatalytic degradation of VOCs using Ln3+-TiO2 catalysts for indoor air purification

Two types of lanthanide ion-doped titanium dioxide (Ln3+-TiO2) catalysts including La3+-TiO2 and Nd3+-TiO2 were prepared by a sol-gel method. The effects of the lanthanide ion doping on the crystal structure, surface area, adsorption properties, pore size distribution, and surface chemical state of the catalysts were investigated by means of XRD, BET, and XPS. As results, the crystal size decreased significantly, while the specific surface area, t-plot total surface area, micropore volume, and the total pore volume increased owing to the lanthanide ion doping. The nitrogen adsorption-desorption isotherms of the catalysts showed that the N2 adsorption ability of the Ln3+-TiO2 catalysts was better than the TiO2 catalyst. Among them, the 0.7% Ln3+-TiO2 catalysts demonstrated the highest adsorption ability. The photocatalytic activity of the catalysts was investigated in the experiments of the photocatalytic degradation of benzene, toluene, ethylbenzene and o-xylene (BTEX) in a gaseous phase. The photocatalytic efficiency of the TiO2 catalysts with the lanthanide ion doping was remarkably enhanced by BTEX removal. The 1.2% Ln3+-TiO2 catalysts achieved the highest photocatalytic activity. The enhanced photodegradation of BTEX is possibly due to the improved adsorption ability and the enhanced electron-hole pairs separation due to the presence of Ti3+ on the surface of Ln3+-TiO2 catalysts and the electron transfer between the conduction band/defect level and lanthanide crystal field state.     

Exposure to PCBs, through inhalation, dermal contact and dust ingestion at Taizhou, China--a major site for recycling transformers

Air samples containing gaseous and particulate phases were collected from e-waste workplaces and residential areas of an intensive e-waste recycling area and compared with a reference site. The highest total concentration of PCBs was detected at transformer recycling workshops (17.6 ng m(-3)), followed by the residential area (3.37 ng m(-3)) at Taizhou, and the lowest was obtained at the residential area of the reference site, Lin'an (0.46 ng m(-3)). The same trend was also observed with regards to PCB levels in dust samples. The highest average PCBs level of 2824 ng g(-1) (dry wt) was found in the transformer recycling workshops, and was significantly higher than that of residential areas of Taizhou (572 ng g(-1) dry wt) and Lin'an (42.4 ng g(-1) dry wt). WHO-PCB-TEQ level in the workshops of Taizhou was 2216 pg TEQ(1998)g(-1) dry wt or 2159 pg TEQ(2005)g(-1) dry wt, due to the high abundance of PCB 126 (21.5 ng g(-1) dry wt), which contributed 97% or 99% of WHO-PCB-TEQs. The estimated intake of PCBs via dust ingestion and dermal absorption by transformer recycling workers were 77.5×10(-5) and 36.0×10(-5) pg WHO-PCB-TEQ(1998)kg(-1)d(-1), and 67.3×10(-5) and 31.3×10(-5) pg WHO-PCB-TEQ(2005)kg(-1)d(-1), respectively.     

热烈祝贺中国TC207/SC4分委员会正式成立───集团公司质量安全环保部董国永副主任在TC207技术委员会SC4分委员会成立大会上的讲话

尊敬的陈司长、杨主任、马主任，各位代表好！在国家质量技术监督局、国家石油与化学工业局的关怀下，经过一年多的筹备，今天，中国TC207/SC4分委员会正式成立了。下面，我仅代表TC207/SC4分委员会向大会报告。1 TC207/SC4分委员会成立的过程“环境表现评价”是ISO14000族标准的重要组成部分，从1996年在巴西召开第4届ISO/TC207年会以来，中国石油天然气集团公司一直派专人进行跟踪和研究。1997年，中国石油天然气集团公司根据TC207/SC4分委员会提供的ISO14690标准草案，及时转化成中国石油工业标准《健康、安全与环境管理体系…