铜合金实验室试验与实海挂片结果的比较与分析

目的比较实验室试验结果与实海挂片结果对B10和H62两种铜合金腐蚀性能评价的异同之处。方法采用线性极化、电化学阻抗、显微形貌观察等,比较两种铜合金在实验室模拟海水中的的腐蚀速率、点蚀倾向,结合反应机理、腐蚀形貌、环境等外部因素,分析导致实验室与实海环境下出现差异的原因。结果除榆林海域外,实海挂片与实验室结果都表明,B10试样的平均腐蚀速率小于H62。B10和H62两种铜合金随温度升高腐蚀速率增大,在实验室和实海情况下表现出一致性,且平均腐蚀速率都随浸泡时间的延长而降低。结论在实海环境中,温度不是影响点蚀的主要因素,微生物等其他环境因素会对点蚀产生较大影响。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

基于有限元分析的橡胶减振器优化设计

目的加快橡胶减振器的设计过程。方法分析橡胶材料及Mooney-Rivllin橡胶本构模型特点,介绍橡胶减振器应用特点及隔振设计的相关理论,采用Mooney-Rivllin模型模拟橡胶材料的力学特性,通过引进有限元优化技术,在设计初期保证减振器的刚度特性。结果在某设备减振设计中,采用单轴拉压曲线获取了橡胶材料的Mooney-Rivllin模型参数,以减振器的部分结构尺寸为设计参数,减振器的三向刚度为设计目标,获取了三轴向频率近似相等的隔振系统(轴向频率40 Hz、径向频率40.9 Hz)。通过试验测试,减振系统频率与试验值差别较小,其中轴向差别为2%,径向差别为1%。结论通过引进有限元优化技术,采用合理的橡胶本构模型,可以满足工程精度要求,加速了橡胶减振器的设计过程。     

Determination of PAHs by On-Line Polarization Synchronous Fluorescence with HPLC

A novel analytical method has been established for on-line simultaneous determination of fluorene and acenaphthene,chrysene and benzo[a]anthracene (B[a]A) by polarization synchronous fluoromet.y (PSF) coupled to high performance liquid chromatography (HPLC). The detection limits were: 0.039, 0.046, 0.016 and 0.042 mgL-1 for fluorene, acenaphthene, chrysene and B[a]A, respectively. The proposed method has been successfisily applied to simultaneous determination of these PAHs in environmental air and marine sediment samples.     

乌鲁木齐市餐饮业油烟污染的调查及防治初探

通过对乌鲁木齐市20家餐饮业油烟污染的调查分析，结果表明，乌鲁木齐市餐饮业油烟污染严重，并提出了防治措施。     

Determination of organophosphorus pesticides and related compounds in water samples by membrane extraction and gas chromatography

A membrane extraction-gas chromatography method was developed fordetermination of organophosphorus pesticides and related compounds including methamidophos, DDVP, dimethoate, methyl parathion, parathion, thiophosphoric acid trimethyl ester, and thiophosphoramidic acid dimethyl ester in water samples. In thismethod, surface-modified acetic cellulose membranes were used to extract the target analytes in water samples, the extracted analytes were back-extracted into a small amount of methanol, andgas chromatography with pulsed flame photometric detector (GC-PFPD) was used to determine the concentrations of targetanalytes in the extracts. The recoveries obtained for thetarget analytes spiked into the water samples ranged from 66to 94%. The method detection limit for each target analyte was 0.05 g L^-1. The method developed in this study had shown the advantages of being cheap, simple, fast, and reliable. It had been used successfully to determine the concentrations of target analytes in river water samples.     

石河子市空气污染成因及防治对策

对石河子市空气环境质量状况进行了评价，对影响石河子市环境质量的主要因素进行了分析，得出石河子市空气污染属煤烟沙尘型，提出了相应的治理措施和建议。     

粗苯污染事故应急处理

针对一次苯泄漏事故的应急处理过程、方法进行论述与总结，并分析了事故现场周围地表、地下水中苯污染浓度的变化情况，提出了该类事故的应急措施，以此作为处理同类事故的参考和依据。     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.