车载巡测在区域射频电磁环境质量监测与表征中的应用分析

对北京中央电视塔周围25 km²区域电磁环境质量分别进行了射频的网格法手工监测和车载巡测自动监测，通过SPSS软件等对两种监测方法获取的数据进行了统计对比分析，发现两组数据在总体水平及数值分布特征上较为接近，因此车载巡测监测可以替代网格法监测。以车载巡测数据为基础，绘制了实测数据的道路电磁地图，利用插值法绘制了区域电磁地图，对区域电磁环境质量进行了直观表征。从回应公众关注和城市电磁规划出发，建议今后可利用车载巡测监测加强时域和频域的监测。     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).     

Controlled-release fertilizer(CRF):A green fertilizer for controlling non-point contamination in agriculture

Fertilizers contribute greatly to high yields but also result in environmental non-point contamination, including the emission of greenhouse gas(N2O) and eutrophication of water bodies. How to solve this problem has become a serious challenge, especially for China as its high ecological pressure. Controlled-release fertilizer(CRF) has been developed to minimize the contamination while keeping high yield and has become a green fertilizer for agriculture. Several CRFs made with special coating technology were used for testing the fertilizer effects in yield and environment through pot experiment and field trial. The result indicated that the CRFs had higher N use efficiency, thus reducing N loss through leaching and volatilization while keeping higher yields. Comparing with imported standard CRFs,the test on CRFs showed similar fertilizer effect but with much lower cost. CRFs application is becoming a new approach for minimizing non-point contamination in agriculture.     

中国沿海常见棘毒鱼类的毒性研究--日本鬼(鱼由)背鳍棘中Ⅰ型毒腺细胞形成的研究

用光、电镜方法研究了日本鬼(鱼由)背鳍棘中Ⅰ型毒腺细胞的形成过程.结果表明:位于背鳍棘两侧纵沟内的毒腺组织周围有较致密的结缔组织的鞘膜包绕,该鞘膜钝性剥离后可见内面光滑,有Ⅰ型和Ⅱ型毒腺细胞的痕迹.而毒腺组织内下侧与毒棘的骨组织相连处结缔组织疏松,有许多小的梭形细胞;在梭形细胞之间及周围有新形成的幼稚腺细胞,其组织结构类似Ⅰ型毒腺细胞.透射电镜下可见该区域的结缔组织中除结缔组织的细胞及纤维成分以外,有许多大小不同的细胞,细胞单核,胞质内各种细胞器(粗面内质网、高尔基复合体、线粒体等)发达.在不同的细胞内有形态和数量不同的类似溶酶体样物质,其内涵物类似Ⅰ型毒腺细胞胞质结构.推测毒腺组织内的毒腺细胞的发生与腺体下内侧的结缔组织内的梭形细胞有关,Ⅰ型细胞由幼稚细胞发育而来.     

杭州市大气NOx来源及控制对策研究

采用定常高斯模式和Thlong程序建立NOx污染源强与大气NOx浓度间定量响应数值模型,计算了点源、面源和流动源等各类污染源对杭州市区各关心点NOx的平均贡献率,分别约为17%,17%和66%,其中市区机动车尾气贡献率高达50%左右,是首先要控制的污染源.同时提出NOx排放削减方案及实施后大气NOx质量改善状况,为环保管理部门削减NOx污染源提出供决策参考.     

高级氧化技术机理及在水处理中的应用进展

综述了近年来发展迅速的高级氧化技术，主要包括Fenton法、臭氧氧化法、湿式氧化技术、超临界水氧化法、纳米光催化氧化法电化学催化降解法及超声降解法等。介绍了各种高级氧化技术的基本原理及在废水处理中的应用进展，并对其特点进行了评述。     

电厂脱硫产物的处置和综合利用

本文通过对电厂脱硫产物成份的分析,并类比国外技术论述其贮存处置方法,脱硫产物综合利用的用途及合理性.     

在磁场中活性炭吸附有机物的研究

将磁化技术引入吸附过程中，考察了磁场处理对活性炭吸附苯、硝基苯、苯甲酸、氯苯和苯酚的影响．结果表明，预磁处理能使非极性物质苯和极性较小的氯苯、苯酚在活性炭上的吸附容量减小，而使极性较大的苯甲酸和有NO2基团的硝基苯的吸附容量增大．增大磁场强度能加强苯和苯甲酸的磁处理效果。     

V2O5-WO3/TiO2脱硝催化剂的制备及其性能

对选择性催化还原脱硝用催化剂V2O5-WO3/TiO2的制备工艺进行了实验研究.采用溶胶-凝胶法制得TiO2凝胶,对凝胶进行不同条件下的干燥和煅烧处理,然后通过浸渍法在TiO2上依次负载WO3和V2O5,最终得到V2O5-WO3/TiO2催化剂.结果表明,TiO2凝胶的处理温度对催化剂结构和脱除NO的性能有一定的影响,TiO2凝胶干燥温度为105 ℃时制得的催化剂活性较高,在实验条件下NO脱除率最高可达98.3%.     

黄土洞穴的环境灾害效应

黄土洞穴本身是一种地质灾害,对黄土地区的运输、管道、拦蓄水工程、厂房、民居等各类工业与民用建筑构成不同程度威胁;还可促发其它地质灾害的发生和发展,恶化黄土高原地区的生态环境和地质环境。文章根据野外和室内研究所积累的资料,对黄土洞穴的地质灾害效应以及环境变化效应进行了初步研究。其研究成果不仅为黄土洞穴工程灾害的防治提供科学依据,而且还可进一步了解黄土地区水土流失的发育规律及其第四纪以来的地质环境变化状况。