活化后钾改性正硅酸锂吸附CO2的性能评价及动力学研究

制备了钾改性正硅酸锂(K-Li4SiO4),并对其进行了自活化,考察了活化后K-Li4SiO4吸附剂在不同温度和CO2浓度气氛中吸附CO2的性能及动力学行为。总体而言,吸附剂的CO2吸附能力随着温度的升高、CO2浓度的增加而提升。在700℃、100%体积分数CO2气氛中吸附剂的吸附量最大,可达7.9 mmol/g,吸附剂的利用率为95.2%。利用双指数模型能够很好地描述吸附剂在各个温度以及各个CO2浓度气氛下的CO2吸附过程。吸附活化能随着CO2气氛浓度的升高而降低,CO2体积分数为20%,50%,100%时的吸附活化能分别为26448,14035,6178 J/mol。     

高黏度污泥螺带螺杆搅拌混合特性的数值模拟

污泥处理过程通常需要加入添加剂,而高黏度污泥流动性差,搅拌混合是一个难点。选用螺带螺杆搅拌器加添加剂搅拌高黏度污泥,用Solid Works软件几何建模后,将模型导入Gambit划分网格,结合Fluent软件选用多重参考系法(MRF)分别对双螺带螺杆搅拌器与单螺带螺杆搅拌器下的污泥与添加剂混合过程进行了模拟,对比了两种搅拌桨的混合时间、体积分数流场分布及混合效率,分析了不同加料区域的影响,并将搅拌功率模拟与试验结果进行了对比。结果表明:螺带螺杆搅拌器适用于高黏度污泥的搅拌且双螺带螺杆搅拌器混合时间更短,体积分数流场更快趋于稳定且混合效率更高;最佳加料区域为搅拌槽的中部。     

蓝藻资源化技术研究及应用进展

针对蓝藻资源化问题,概述国内外利用蓝藻制备有机肥、提取高纯度藻蓝蛋白、制备活性炭和藻粉这4种利用方式的特点、现状及应用进展。提出,应从高温好氧堆肥技术、藻蓝蛋白提取技术和藻水分离技术这3个方面,解决其关键技术问题并进行进一步研究开发。     

Nitrogen fertility and abiotic stresses management in cotton crop: a review

This review outlines nitrogen (N) responses in crop production and potential management decisions to ameliorate abiotic stresses for better crop production. N is a primary constituent of the nucleotides and proteins that are essential for life. Production and application of N fertilizers consume huge amounts of energy, and excess is detrimental to the environment. Therefore, increasing plant N use efficiency (NUE) is important for the development of sustainable agriculture. NUE has a key role in crop yield and can be enhanced by controlling loss of fertilizers by application of humic acid and natural polymers (hydrogels), having high water-holding capacity which can improve plant performance under field conditions. Abiotic stresses such as waterlogging, drought, heat, and salinity are the major limitations for successful crop production. Therefore, integrated management approaches such as addition of aminoethoxyvinylglycine (AVG), the film antitranspirant (di-1-p-menthene and pinolene) nutrients, hydrogels, and phytohormones may provide novel approaches to improve plant tolerance against abiotic stress-induced damage. Moreover, for plant breeders and molecular biologists, it is a challenge to develop cotton cultivars that can tolerate plant abiotic stresses while having high potential NUE for the future.     

Carbonyl emissions from vehicular exhausts sources in Hong Kong

Vehicular emission (VE) is one of the important anthropogenic sources for airborne carbonyls in urban area. Six types of VE-dominated samples were collected at representative locations in Hong Kong where polluted by a particular fueled type of vehicles, including (i) a gas refilling taxis station (liquefied petroleum gas [LPG] emission); (ii) a light-duty passenger car park (gasoline emission); (iii) a minibus station (diesel emission); (iv) a single-deck-bus depot (diesel emission); (v) a double-deck-bus depot (diesel emission); and (vi) a whole-food market entrance for light- and heavy-duty vehicles (diesel emission). A total of 15 carbonyls in the samples were quantified. Formaldehyde was the most abundant carbonyl among the VE-dominated samples, and its contribution to the total quantified amount on a molar basis ranged from 54.8% to 60.8%. Acetaldehyde and acetone were the next two abundant carbonyls. The carbonyls were quantified at three roadside locations in Hong Kong. The highest concentrations of formaldehyde and acetaldehyde, 22.7 +/- 8.4 and 6.0 +/- 2.8 microg/m3, respectively, were determined in the samples collected at a main transportation gate for goods between Hong Kong and Mainland China. The total quantified carbonyl concentration, 37.9 +/- 9.3 microg/m3, was the highest at an entrance of a cross-harbor tunnel in downtown area. The theoretical carbonyls compositions of the three roadside locations were estimated according to the VE-dominated sample profiles and the statistics on vehicle numbers and types during the sampling period. The measured compositions of formaldehyde were much higher than the theoretical compositions in summer, demonstrating that photochemical reactions significantly contributed to the formaldehyde production in the roadsides.     

双硫腙-CTMAB光度法测定锌的研究

在硼砂 -氢氧化钠缓冲溶液 (p H=1 1 .0 )中 ,溴化十六烷基三甲胺 (CTMAB)存在下双硫腙与锌生成可溶于水的 2∶ 1红色络合物 ,λmax=540 nm ,ε=7.3 0× 1 0 4 L· cm-1· mol-1,锌含量在 0～ 0 .6mg/L内符合比耳定律。本法可用于水样中锌含量的测定     

Seasonal variations of monocarbonyl and dicarbonyl in urban and sub-urban sites of Xi’an,China

Seventeen airborne carbonyls including monocarbonyls and dicarbonyls were determined in urban and sub-urban sites of Xi’an, China in three seasons in 2010. In winter, acetone was the most abundant carbonyl in the urban site due to usage of organic solvents in constructions and laboratories and its slower atmospheric removal mechanisms by photolysis and reaction with hydroxyl radical than those of formaldehyde and acetaldehyde. In the sub-urban site, acetaldehyde was the most abundant carbonyl, followed by formaldehyde and acetone. During summer, however, formaldehyde was the most dominant carbonyl in both sites. The photooxidations of a wide range of volatile organic compounds (VOCs) yielded much more formaldehyde than other carbonyls under high solar radiation and temperature. In the urban site, the average concentrations of dicarbonyls (i.e., glyoxal and methyglyoxal) in spring and summer were higher than that in winter. Transformation of aromatic VOCs emitted from fuel evaporation leads to the formation of 1,2-dicarbonyls. A reverse trend was observed in sub-urban sites, as explained by the relatively low abundances and accumulations of VOC precursors in the rural atmosphere during warm seasons. Moreover, cumulative cancer risk based on measured outdoor carbonyls (formaldehyde and acetaldehyde) in Xi’an Jiaotong University and Heihe was estimated (8.82?×?10^?5 and 4.96?×?10^?5, respectively). This study provides a clear map on the abundances of carbonyls and their source interpretation in the largest and the most economic city in Northwestern China.     

A device for sampling the mud‐water interface in eutrophic lakes and bogs for residue analysis

Abstract

A tubular device has been developed making it possible to obtain layered samples of loosely aggregated, flocculent material from bogs or eutrophic lakes. The samples are up to 50 cm long and 15 cm in diameter. The sampler is free from protuberances and intact, layered samples can be taken. The tubular part of the sampler is about 85 em long, the walls of the lower 25‐cm portion harbouring a pneumatic closing mechanism which is controlled from above the water surface. An extendible handle for manipulating the sampler and for guiding it into place, is fastened to the upper end of the sampling tube. The performance and the operation of the sampler in the field are described.     

CSHM: Web-based safety and health monitoring system for construction management

INTRODUCTION: This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. METHOD: The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. RESULTS: The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. IMPACT ON INDUSTRY: As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.