Development of a catalytic dehalogenation (Cl,Br) process for municipal waste plastic-derived oil

Dehalogenation is a key technology in the feedstock recycling of mixed halogenated waste plastics. In this study, two different methods were used to clarify the effectiveness of our proposed catalytic dehalogenation process using various carbon composites of iron oxides and calcium carbonate as the catalyst/sorbent. The first approach (a two-step process) was to develop a process for the thermal degradation of mixed halogenated waste plastics, and also develop dehalogenation catalysts for the catalytic dehydrochlorination of organic chlorine compounds from mixed plastic-derived oil containing polyvinyl chloride (PVC) using a fixed-bed flow-type reactor. The second approach (a single-step process) was the simultaneous degradation and dehalogenation of chlorinated (PVC) and brominated (plastic containing brominated flame retardant, HIPS–Br) mixed plastics into halogen-free liquid products. We report on a catalytic dehalogenation process for the chlorinated and brominated organic compounds formed by the pyrolysis of PVC and brominated flame retardant (HIPS–Br) mixed waste plastics [(polyethylene (PE), polypropylene (PP), and polystyrene (PS)], and also other plastics. During dehydrohalogenation, the iron- and calcium-based catalysts were transformed into their corresponding halides, which are also very active in the dehydrohalogenation of organic halogenated compounds. The halogen-free plastic-derived oil (PDO) can be used as a fuel oil or feedstock in refineries.     

垃圾焚烧飞灰制备高温脱硫剂及其性能评价

利用不同地方的垃圾焚烧飞灰来制备高温炉内的脱硫剂,并利用热天平来研究飞灰脱硫剂(FA-脱硫剂)的固硫性能.实验结果表明,FA-脱硫剂的孔隙分布在2000nm左右,并且比生石灰具有更好的固硫能力.添加石膏后的FA-脱硫剂,其机械强度大大提高,但孔径结构变小,脱硫率也有所下降.添加10%(质量分数)水玻璃的FA-脱硫剂的机械强度相当于生石灰,脱硫效果更明显,比没有添加水玻璃时效果更好,孔径结构基本不变.这是由于水玻璃中的钠跟二氧化硫反应生成钠硫酸盐.     

Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater

Environmental Science and Pollution Research - The present study aims at evaluating the batch scale potential of cotton shell powder (CSP), Moringa oleifera leaves (ML), and magnetite-assisted...     

Prospect of castor oil biodiesel in Bangladesh: Process development and optimization study

In this study, castor oil (CO) has been investigated as a potential source for biodiesel production in Bangladesh. Castor oil has been extracted from the seeds by mechanical press and the Soxhlet extraction method. Maximum oil content of 55.7% has been found by the Soxhlet extraction method. The physicochemical properties such as free fatty acid (FFA) content, kinematic viscosity, saponification value, and density of the oil have been measured by different standard methods. The FFA content and viscosity have been found considerably higher such as 33.5% and 253 mm²/s, respectively. Biodiesel has been prepared using a three-step method comprising of saponification of oil followed by acidification of the soap and esterification of FFA. The overall yield of FFA from CO is found to be around 89.2%. The final step is esterification that produces fatty acid methyl ester (FAME) and a maximum 97.4% conversion of FFA to biodiesel has been observed. The effect of the oil to methanol molar ratio, catalyst concentration, reaction temperature, and time has been investigated for esterification reaction and optimized using the response surface methodology. ¹H NMR of crude castor oil and castor oil methyl ester (COME) was studied and analyzed that confirms the complete conversion of castor oil to biodiesel. Finally, the biodiesel, produced under optimum conditions, was characterized using the various standard method and found comparable with petro-diesel and biodiesel standard.     

Sustainable pesticide governance in Bangladesh: socio-economic and legal status interlinking environment,occupational health and food safety

Pesticides, regardless of their known toxic impacts to human health and environment, are widely used in the rapid growing agricultural sectors of developing countries. As an agricultural country with small lands and enormous population to feed, a developing country like Bangladesh rely heavily on the uses of pesticides to increase crop yields. Nevertheless, during the past decades, Peoples’ Republic of Bangladesh has experienced 26.46% decrease in total pesticide consumption. However, the presence of unregistered pesticides in the environmental samples and agricultural products has pointed out the weakness in the existing legal regime of the pesticide governance. This, in turn, is threatening the livelihood and health of the farmers, food safety and consumer health. This paper reviews the antiquity of the status of pesticide consumption, evolution and drawbacks of pesticide in the context of existing socio-economic position of Bangladesh. A consolidated uniform system is lacking to project pesticide management in the country. Existing legal policy, rules and regulations in the context of international agreements regarding pesticide management have been reviewed and suggested for further amendment. Moreover, role of green microfinance in sustainable management of pesticides and food safety were recommended. A framework is proposed for pesticide governance with a stronger pesticide surveillance program and coordination of ministries interlinking environmental, occupational health and food safety.     

Does irrigation with reclaimed water significantly pollute shallow aquifer with nitrate and salinity? An assay in a perurban area in North Tunisia

In Tunisia, reclaimed water is increasingly used for irrigation in order to mitigate water shortage. However, few studies have addressed the effect of such practice on the environment. Thus, we attempted in this paper to assess the impact of irrigation with reclaimed water on the nitrate content and salinity in the Nabeul shallow aquifer on the basis of satellite images and data from 53 sampled wells. Ordinary and indicator kriging were used to map the spatial variability of these groundwater chemical parameters and to locate the areas where water is suitable for drinking and irrigation. The results of this study have shown that reclaimed water is not an influential factor on groundwater contamination by nitrate and salinity. Cropping density is the main factor contributing to nitrate groundwater pollution, whereas salinity pollution is affected by a conjunction of factors such as seawater interaction and lithology. The predictive maps show that nitrate content in the groundwater ranges from 9.2 to 206 mg/L while the electric conductivity ranges from 2.2 to 8.5 dS/m. The high-nitrate concentration areas underlie sites with high annual crop density, whereas salinity decreases gradually moving away from the coastline. The probability maps reveal that almost the entire study area is unsuitable for drinking with regard to nitrate and salinity levels. Appropriate measures, such as the elaboration of codes of good agricultural practices and action programs, should be undertaken in order to prevent and/or remediate the contamination of the Nabeul shallow aquifer.     

Bench-scale gasification of cedar wood – Part I: Effect of operational conditions on product gas characteristics

The present study was conducted within the framework of R&D activities on the development of gasification and reforming technologies for energy and chemical recovery from biomass resources. Gasification of the Japanese cedar wood has been investigated under various operating conditions in a bench-scale externally heated updraft gasifier; this was followed by thermal reforming. Parametric tests by varying the residence times, gasification temperatures, equivalence ratios (ERs) and steam-to-carbon (S/C) ratios were performed to determine their effects on the product gas characteristics. Thermodynamic equilibrium calculations were preformed to predict the equilibrium gas composition and compared with the experimental value.We found that the product gas characteristics in terms of the H₂/CO ratio, CO₂/CO ratio, and CH₄ and lighter hydrocarbons concentrations are significantly affected by the operating conditions used. Increasing the residence time decreased the CO₂/CO ratio; however, a nominal effect was noticed on H₂ concentration as a function of the residence time. At sufficient residence time, increasing the temperature led to higher H₂ yields, CO efficiency and higher heating value (HHV) of the product gas. The presence of steam during gasification effectively enhanced the proportion of H₂ in the product gas. However, higher S/C ratio reduced the HHV of the product gas. Increasing the ER from 0 to 0.3 increased the H₂ yields and CO efficiency and decreased the HHV of the product gas.The evolution of CH₄ and lighter hydrocarbons at low gasification temperatures was relatively higher than that at high temperature gasification. The evolution of CH₄ and lighter hydrocarbons at high gasification temperatures hardly varied over the investigated operating conditions.     

Biodegradation Properties of Poly-ε-caprolactone,Starch and Cellulose Acetate Butyrate Composites

Blending starches with polymers such as poly-ε-caprolactone (PCL) has been used as a route to biodegradable plastics. The addition of starch has a significant effect on all physical properties including toughness, elongation at break. On blending cellulose acetate butyrate (CAB) with starch and PCL, improvements in most physical and mechanical properties were observed. This is may be due to CAB acts as a compatibilizer between PCL and starch due to the presence of both hydroxyl groups (in starch and CAB) and ester carbonyls (in PCL and CAB). The presence of different compounds affects the way in which other components degrade. For example the structure of CAB within a starch and PCL combination might make the degradation rate different to that when starch was only mixed with PCL. To check whether this was the case, three combinations of different blends were used to calculate the rate of degradation of each of them separately. These degradation rate constants were then used to predict the theoretical degradation which was checked against the experimental value for other different combinations.     

Polybrominated diphenyl ethers (PBDEs) in soils along a rural-urban-rural transect: sources, concentration gradients, and profiles

This study reports concentrations of PBDEs in surface soil samples collected along a 140 km transect across Kuwait to assess the role of urban centers as sources of persistent organic pollutants to the surrounding environment. The ΣPBDE concentrations varied by a factor of ∼250 and ranged from 289 to 80,078 pg g⁻¹ d.w. The concentrations of PBDEs in Kuwait City were significantly higher (p < 0.01) than those collected from sites outside the city supporting the hypothesis that urban centers are sources of PBDEs. The congener profiles were dominated by BDE-209, accounting for 93% of the PBDEs in the soil samples. The concentrations of all congeners (except BDE-209) were highly correlated with percent organic carbon (%OC) (p > 0.05) when the data from Kuwait City was omitted from the analysis. These findings suggest that soil concentrations outside the urban centers were close to equilibrium with the atmosphere.