Dams and Flows: Immersing in Western Meaning Systems in Search of Ecocultural Reflexivity

In this unprecedented era of anthropogenic ecological destruction, this study illustrates inadequacies in conceptual language available in Western settings to think deeply and holistically about “nature.” At the same time, the study illustrates transformative potential of moments of ecocultural reflexivity. Using free write methodology, we examine ways participants in the United States, New Zealand, and Australia articulate what they mean when they say “nature.” We interpret participant streams of consciousness as representative of a wider Western river-way, a channel of dominant, multiple, and contradictory meanings in continuous movement. We identify conceptual obstructions that provide glimpses into ways Western ecological relations are bounded and dammed by binary, fragmented, and unconsidered meanings. Yet reflexivity in the face of such obstructions, and in potent ecocultural side streams of childhood remembering and ecocentric cosmology, provides some participants a lucid flow of regenerative narratives at a time such shared stories are urgently needed.     

1,4‐Dioxane: Emerging technologies for an emerging contaminant

The synthetic chemical, 1,4‐dioxane, is classified by the U.S. Environmental Protection Agency (EPA) as a probable human carcinogen. Between 2013 and 2015, the EPA detected 1,4‐dioxane in public drinking water supplies in 45 states at concentrations up to 33 µg/L and in groundwater from releases at hazardous waste sites across the United States. Although a Federal maximum contaminant level drinking water standard has not yet been proposed, state‐specific standards and criteria are as low as 0.3 µg/L. 1,4‐Dioxane is a recalcitrant chemical in that applications of conventional treatment technologies have had limited success in reducing concentrations in water to meet current and proposed health‐protective levels. Although mainly used as a stabilizer for the solvent 1,1,1‐trichloroethane, it has been used in other industrial processes and has been detected in a variety of consumer products, such as foods, pharmaceuticals, cosmetics, and detergents. The high aqueous solubility of 1,4‐dioxane coupled with limited solubility of chlorinated solvents typically found in conjunction with 1,4‐dioxane contamination is the primary reason for its treatment challenges. In the last several years, an alternative, cost‐effective technology has been developed that has demonstrated treatment to levels significantly lower than the Federal and state‐specific goals. This article provides a Federal and state‐by‐state summary of 1,4‐dioxane‐specific drinking water and groundwater concentration criteria and qualitative comparison of the effectiveness of conventional treatment technologies compared to the effectiveness of an alternative treatment technology. A case study is also provided to present details regarding the application of an alternative treatment technology at an active groundwater remediation site in California.     

Examination of the influence of dissolved halite (NaCl) on the leaching of lead (Pb) from cement-based solidified wastes

The leaching of lead from cement-based solidified waste forms mixed at different water/cement ratios was studied by conducting equilibrium and semi-dynamic leaching tests using deionized water and sodium chloride solutions. The results suggest that leaching of the primary constituents of the cement (calcium, silicon and sulfate) is controlled by solubility equilibria, with increased leaching into chloride solutions due to ionic strength effects. The original porosity of the waste forms increased with water/cement ratio and chloride solutions further increased it as a result of decalcification. Lead leaching was generally low, and appears to be a transport-controlled process, such that leaching correlates positively with porosity.     

Structural insights on bioremediation of polycyclic aromatic hydrocarbons using microalgae: a modelling-based computational study

Research on bioremediation of polycyclic aromatic hydrocarbons (PAHs) has established that several remediating microbial species are capable of degrading only low molecular weight (LMW)-PAHs, whereas high molecular weight (HMW)-PAHs are hardly degradable. In the present study, the efficiency of degradation of both LMW and HMW-PAHs by cytochrome P450 monooxygenase (CYP) of microalgae was studied. CYP have a key role in the detoxification of xenobiotics. So far, the structure of CYP in microalgae is not predicted; the protein structure was constructed by molecular modelling in the current study using the available template of microalgal CYP. Modelled microalgae 3D structures were docked against 38 different PAH compounds, and the information regarding the interaction between protein and PAHs viz. binding sites along with mode of interactions was investigated. We report that CYP from the microalgae Haematococcus pluvialis and Parachlorella kessleri was found to possess broad oxidising capability towards both LMW and HMW-PAHs. P. kessleri showed a least value with extra precision glide score of ? 10.23 and glide energy of ? 23.48 kcal/mol. PAHs bind to CYP active sites at Lys ⁶⁹, Trp ⁹⁶, Gln ³⁹⁷ and Arg ³⁹⁸ through intermolecular hydrogen bonding. Also, study revealed that PAHs interacted with CYP active sites through intermolecular hydrogen bonding, hydrophobic bonding, π–π interactions and van der waals interactions. Thus, structural elucidation study confirms that microalgae Parachlorella kessleri have the capacity to remediate HMW more efficiently than other microorganisms. Our results provide a framework in understanding the structure and the possible binding sites of CYP protein for degradation of PAH and that could be a screening tool in identifying the phycoremediation potential.     

Impacts of business-as-usual management on ecosystem services in European mountain ranges under climate change

Mountain forests provide a multitude of services beyond timber production. In a large European project (ARANGE—Advanced multifunctional forest management in European mountain RANGEs), the impacts of climate change and forest management on ecosystem services (ES) were assessed. Here, we provide background information about the concept that was underlying the ARANGE project, and its main objectives, research questions, and methodological approaches are presented. The project focused on synergies and trade-offs among four key ES that are relevant in European mountain ranges: timber production, carbon storage, biodiversity conservation, and protection from gravitational natural hazards. We introduce the concept and selection of case study areas (CSAs) that were used in the project; we describe the concept of representative stand types that were developed to provide a harmonized representation of forest stands and forest management in the CSAs; we explain and discuss the climate data and climate change scenarios that were applied across the seven CSAs; and we introduce the linker functions that were developed to relate stand- and landscape-scale forest features from model simulations to ES provisioning in mountain forests. Finally, we provide a brief overview of the Special Feature, with an attempt to synthesize emerging response patterns across the CSAs.     

The legacy of lead pollution: (dis)trust in science and the debate over Superfund

Lead contamination is a significant health hazard in communities around the world, but this environmental toxin often remains unknown to residents living near hazardous sites. This research investigates a unique case where residents were informed of lead contamination but rejected official and scientific narratives regarding environmental risks. The case study involves a decommissioned smelter in Colorado. Drawing from data collected over three years, the researchers examine how officials and experts communicated the severity of environmental health hazards. Despite these efforts, residents opposed the Environmental Protection Agency’s attempts to place the site on the National Priorities List for federal cleanup. The government’s framing of science and environmental risk failed to resonate with homeowners, despite the known and significant scientific evidence confirming environmental health hazards, and residents’ perceptions of lead contamination were mitigated by material concerns, including property values and community stigma. Implications for future research on lead contamination, environmental risk, and trust in science are discussed.     

Calcareous electrochemical precipitation,a new method to trap nickel in seawater

There are few efficient, rapid and cheap methods to remove toxic metals from contaminated waters. Here we hypothesised that cathodic protection, an existing method used to control the corrosion of metallic structures, may trap toxic metals. Indeed, in seawater, the application of a cathodic current on a metallic structure induces the precipitation of limestone (CaCO₃) and magnesium dihydroxyde (Mg(OH)₂), thus forming a calcareous deposit on the metal surface. We therefore presumed that such calcareous deposit may trap metals dissolved in waters. Actually calcareous deposit formation has never been studied in the presence of dissolved metallic contaminants such as nickel. Here we tested ionic nickel (Ni²⁺) precipitation in calcareous deposit with a galvanized steel electrode by spiking artificial seawater with a NiCl₂ salt during 7 days of applied current. We analysed deposit surface and cross section by µ-Raman spectroscopy and scanning electron microscopy (SEM) with X-ray microanalysis. Ni concentration in the deposit was quantified by inductively coupled plasma analysis, after deposit dissolution in 60% HNO₃. Results show that in 7 days up to 24% of nickel can be trapped in the calcareous deposit. Scanning electron microscopy reveals that Ni is trapped under a pure CaCO₃ layer of aragonite. Raman spectra show that nickel is incorporated as nickel dihydroxyde (Ni(OH)₂), as evidence by vibration bands at 446 and 510 cm^?1. Overall our findings disclose a new and efficient method, calcareous electrochemical precipitation, which has potential applications to remove toxic metals from contaminated waters.     

Flow and drag force around a free surface piercing cylinder for environmental applications

This paper investigates flows around a free surface piercing cylinder with Froude number F > 0.5 and Reynolds number around Re = 50,000. The aim of this work is to gain a better understanding of the flow behaviour in environmental systems such as fishways. The advances are based upon experimental and numerical results. Several flow discharges and slopes are tested to obtain both subcritical and supercritical flows. The drag force exerted on the cylinder is measured with the help of a torque gauge while the velocity field is obtained using particle velocimetry. For the numerical part, two URANS turbulence models are tested, the k-\(\omega\) SST and the RNG k-\(\varepsilon\) models using the OpenFOAM software suite for subcritical cases, and then compared with the corresponding experimental results. With fishways applications in mind, the changes in drag coefficient \(C_d\) versus Froude number and water depth are studied and experimental correlations proposed. We conclude that the most suitable URANS turbulence model for reproducing this kind of flow is the k-\(\omega\) SST model.     

Evaluation of alternative filter media for particulate matter emission testing of residential wood heating devices

The performance of Teflon-coated glass fiber filter media (Pallflex Emfab TX40) is evaluated for particulate matter (PM) sampling of residential wood heating devices in a dilution tunnel. Thirty samples of varying duration and PM loading and concentration were collected from an U.S. Environmental Protection Agency (EPA) Method 28 dilution tunnel using dual Method 5G sample trains with untreated glass fiber and Emfab filters. Filters were weighed soon after the end of sampling and again the next day after equilibration at 35% relative humidity (RH). PM concentrations from both types of filters agreed very well with 1-day equilibration, demonstrating that Emfab filters are appropriate for use in measuring PM from residential wood burning appliances in a dilution tunnel and have performance equal to or better than the glass fiber filter media. Agreement between filter media without equilibration was erratic, with PM from glass fiber filter samples varying from slightly less than the Emfab samples to as much as 2.8 times higher. Some of the glass fiber filters lost substantial mass with equilibration, with the highest percent loss at lower filter mass loadings. Mass loss for Emfab samples was a small percentage of the mass and very consistent across the range of mass loadings. Taken together, these results may indicate water uptake on the glass fiber media that is readily removed with 1-day equilibration at moderate RH conditions.

Implications: EPA regulations now allow the use of either glass fiber or Teflon filter media for wood appliance PM emission testing. Teflon filter media minimizes the potential for acid-gas PM artifacts on glass fiber filters; this is important as EPA moves toward the use of locally sourced cordwood for testing that may have higher sulfur content. This work demonstrates that the use of Teflon-coated glass fiber filters can give similar PM measurement results to glass fiber filters after 1 day of equilibration. With no equilibration, measured PM from glass fiber filters was usually higher than from Teflon-coated glass fiber filters.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.