Field performance evaluation during fog-dominated wintertime of a newly developed denuder-equipped PM1 sampler

This study presents the performance evaluation of a novel denuder-equipped PM₁ (particles having aerodynamic diameter less than 1 μm) sampler, tested during fog-dominated wintertime, in the city of Kanpur, India. One PM₁ sampler and one denuder-equipped PM₁ sampler were co-located to collect ambient PM₁ for 25 days. The mean PM₁ mass concentration measured on foggy days with the PM₁ sampler and the denuder-equipped PM₁ sampler was found to be 165.95 and 135.48 μg/m³, respectively. The mean PM₁ mass concentration measured on clear days with the PM₁ sampler and the denuder-equipped PM₁ sampler was observed to be 159.66 and 125.14 μg/m³, respectively. The mass concentration with denuder-fitted PM₁ sampler for both foggy and clear days was always found less than the PM₁ sampler. The same drift was observed in the concentrations of water-soluble ions and water-soluble organic carbon (WSOC). Moreover, it was observed that the use of denuder leads to a significant reduction in the PM positive artifact. The difference in the concentration of chemical species obtained by two samplers indicates that the PM₁ sampler without denuder had overestimated the concentrations of chemical species in a worst-case scenario by almost 40 %. Denuder-fitted PM₁ sampler can serve as a useful sampling tool in estimating the true values for nitrate, ammonium, potassium, sodium and WSOC present in the ambient PM.     

The role of precursor gases and meteorology on temporal evolution of O3 at a tropical location in northeast India

South Asia, particularly the Indo-Gangetic Plains and foothills of the Himalayas, has been found to be a major source of pollutant gases and particles affecting the regional as well as the global climate. Inventories of greenhouse gases for the South Asian region, particularly the sub-Himalayan region, have been inadequate. Hence, measurements of the gases are important from effective characterization of the gases and their climate effects. The diurnal, seasonal, and annual variation of surface level O₃ measured for the first time in northeast India at Dibrugarh (27.4° N, 94.9° E, 111 m amsl), a sub-Himalayan location in the Brahmaputra basin, from November 2009 to May 2013 is presented. The effect of the precursor gases NO _x and CO measured simultaneously during January 2012–May 2013 and the prevailing meteorology on the growth and decay of O₃ has been studied. The O₃ concentration starts to increase gradually after sunrise attaining a peak level around 1500 hours LT and then decreases from evening till sunrise next day. The highest and lowest monthly maximum concentration of O₃ is observed in March (42.9?±?10.3 ppb) and July (17.3?±?7.0 ppb), respectively. The peak in O₃ concentration is preceded by the peaks in NO _x and CO concentrations which maximize during the period November to March with peak values of 25.2?±?21.0 ppb and 1.0?±?0.4 ppm, respectively, in January. Significant nonlinear correlation is observed between O₃ and NO, NO₂, and CO. National Atmospheric and Oceanic Administration Hybrid Single-Particle Lagrangian Integrated Trajectory back-trajectory and concentration weighted trajectory analysis carried out to delineate the possible airmass trajectory and to identify the potential source region of NO _x and O₃ concentrations show that in post-monsoon and winter, majority of the trajectories are confined locally while in pre-monsoon and monsoon, these are originated at the Indo-Gangetic plains, Bangladesh, and Bay of Bengal.     

Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area,Delhi, India

Nowadays, e-waste is a major source of environmental problems and opportunities due to presence of hazardous elements and precious metals. This study was aimed to evaluate the pollution risk of heavy metal contamination by informal recycling of e-waste. Environmental risk assessment was determined using multivariate statistical analysis, index of geoaccumulation, enrichment factor, contamination factor, degree of contamination and pollution load index by analysing heavy metals in surface soils, plants and groundwater samples collected from and around informal recycling workshops in Mandoli industrial area, Delhi, India. Concentrations of heavy metals like As (17.08 mg/kg), Cd (1.29 mg/kg), Cu (115.50 mg/kg), Pb (2,645.31 mg/kg), Se (12.67 mg/kg) and Zn (776.84 mg/kg) were higher in surface soils of e-waste recycling areas compared to those in reference site. Level exceeded the values suggested by the US Environmental Protection Agency (EPA). High accumulations of heavy metals were also observed in the native plant samples (Cynodon dactylon) of e-waste recycling areas. The groundwater samples collected form recycling area had high heavy metal concentrations as compared to permissible limit of Indian Standards and maximum allowable limit of WHO guidelines for drinking water. Multivariate analysis and risk assessment studies based on total metal content explains the clear-cut differences among sampling sites and a strong evidence of heavy metal pollution because of informal recycling of e-waste. This study put forward that prolonged informal recycling of e-waste may accumulate high concentration of heavy metals in surface soils, plants and groundwater, which will be a matter of concern for both environmental and occupational hazards. This warrants an immediate need of remedial measures to reduce the heavy metal contamination of e-waste recycling sites.     

Proteomic responses to lead-induced oxidative stress in Talinum triangulare Jacq. (Willd.) roots: identification of key biomarkers related to glutathione metabolisms

In this study, Talinum triangulare Jacq. (Willd.) treated with different lead (Pb) concentrations for 7 days has been investigated to understand the mechanisms of ascorbate–glutathione metabolisms in response to Pb-induced oxidative stress. Proteomic study was performed for control and 1.25 mM Pb-treated plants to examine the root protein dynamics in the presence of Pb. Results of our analysis showed that Pb treatment caused a decrease in non-protein thiols, reduced glutathione (GSH), total ascorbate, total glutathione, GSH/oxidized glutathione (GSSG) ratio, and activities of glutathione reductase and γ-glutamylcysteine synthetase. Conversely, cysteine and GSSG contents and glutathione-S-transferase activity was increased after Pb treatment. Fourier transform infrared spectroscopy confirmed our metabolic and proteomic studies and showed that amino, phenolic, and carboxylic acids as well as alcoholic, amide, and ester-containing biomolecules had key roles in detoxification of Pb/Pb-induced toxic metabolites. Proteomic analysis revealed an increase in relative abundance of 20 major proteins and 3 new proteins (appeared only in 1.25 mM Pb). Abundant proteins during 1.25 mM Pb stress conditions have given a very clear indication about their involvement in root architecture, energy metabolism, reactive oxygen species (ROS) detoxification, cell signaling, primary and secondary metabolisms, and molecular transport systems. Relative accumulation patterns of both common and newly identified proteins are highly correlated with our other morphological, physiological, and biochemical parameters.     

Reproductive toxicity of lead,cadmium, and phthalate exposure in men

Environmental toxicants viz lead or cadmium and phthalate esters (di(2-ethylhexyl) phthalate [DEHP], dibutyl phthalate [DBP], and diethyl phthalate [DEP]) widely found in different environmental strata are linked to deteriorating male reproductive health. The objective was to assess the relationships between the seminal lead, cadmium, and phthalate (DEHP, DBP, DEP) concentrations at environmental level and serum hormone levels and semen quality in non-occupationally exposed men and specify the effect of individual and combined exposure of toxicants on semen quality. A study of 60 male partners of couples attending the Andrology Laboratory of the Reproductive Biology Department, All India Institute of Medical Sciences (AIIMS), New Delhi, India for semen analysis to assess their inability to achieve a pregnancy was selected for the study. The results of univariate and stepwise multiple regression analysis in the unadjusted model showed a significant correlation between lead or cadmium and phthalates DEHP/DBP/DEP and sperm motility, sperm concentration, and DNA damage. After adjusting for potential confounders, an association with lead or DEHP was only observed. The present data shows that lead (Pb) or cadmium (Cd) or phthalates might independently contribute to decline in semen quality and induce DNA damage. Phthalates might influence reproductive hormone testosterone. These findings are significant in light of the fact that men are exposed to a volley of chemicals; however, due to the small sample size, our finding needs to be confirmed in a larger population.     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.     

Case Studies on Biological Treatment of Tannery Effluents in India

Abstract

This paper presents a comparative assessment of the cost and quality of treatment of tannery wastewater in India by two common effluent treatment plants (CETPs) constructed for two tannery clusters, at Jajmau (Kanpur) and at Unnao in the state of Uttar Pradesh, India. The Jajmau plant is upflow anaerobic sludge blanket (UASB) process-based, while the Unnao plant is activated sludge process (ASP)-based. Investigations indicated that the ASP-based plant was superior in all respects. Total annualized costs, including capital and operation and maintenance costs, for the UASB and ASP plants were Rs. 4.24 million/million liters per day (MLD) and Rs. 3.36 million/MLD, respectively. Land requirements for the two CETPs were 1.4 hectares/MLD and 0.95 hectares/MLD, respectively. Moreover, the treated UASB effluent had higher biochemical and chemical oxygen demand (BOD/COD) and considerable amounts of other undesirable constituents, like chromium (Cr) and sulfide, as compared with the ASP effluent, which had lower BOD/COD and negligible concentration of sulfide and Cr. Sludge production from the UASB-based plant was also higher at 1.4 t/day/MLD, in comparison to the sludge production of 0.8 t/day/MLD for the ASP-based plant. Also, the entire sludge produced in the UASB-based plant was Cr-contaminated and, hence, hazardous, while only a small fraction of the sludge produced in the ASP-based plant was similarly contaminated. The results of this study are at variance with the conventional wisdom of the superiority of anaerobic processes for tannery waste-water treatment in tropical developing countries like India.     

Light Scattering from Sea-Salt Aerosols at Interagency Monitoring of Protected Visual Environments (IMPROVE) Sites

Abstract

A method is described to estimate light scattering (Bsp) by sea-salt aerosols at coastal locations in the Interagency Monitoring of Protected Visual Environments (IMPROVE) network. Dry mass scattering efficiencies for fine and coarse sea-salt particles were based on previously measured dry sea-salt size distributions. Enhancement of sea-salt particle scattering by hygroscopic growth was based on NaCl water activity data. Sea-salt aerosol mass at the IMPROVE site in the Virgin Islands (VIIS) was estimated from strontium (Sr) concentrations in IMPROVE aerosol samples. Estimated Bsp, including contributions from sea-salt mass based on Sr, agreed well with measured Bsp at the VIIS IMPROVE site. On average, sea salt accounted for 52% of estimated Bsp at this site. Sea-salt aerosol mass cannot be reliably estimated from Sr unless its crustal enrichment factor exceeds 10. Sodium (Na) concentrations are not accurately determined by X-ray fluorescence analysis in IMPROVE samples. It is recommended that Na be measured in the fine and coarse modes by a more appropriate method, such as atomic absorption spectroscopy or ion chromatography, to account for scattering by sea-salt particles at IMPROVE sites where such contributions may be significant.