Study of temporal variation in ambient air quality during Diwali festival in India

The variation in air quality was assessed from the ambient concentrations of various air pollutants [total suspended particle (TSP), particulate matter ≤10 μm (PM₁₀), SO₂, and NO₂] for pre-Diwali, Diwali festival, post-Diwali, and foggy day (October, November, and December), Delhi (India), from 2002 to 2007. The extensive use of fireworks was found to be related to short-term variation in air quality. During the festival, TSP is almost of the same order as compared to the concentration at an industrial site in Delhi in all the years. However, the concentrations of PM₁₀, SO₂, and NO₂ increased two to six times during the Diwali period when compared to the data reported for an industrial site. Similar trend was observed when the concentrations of pollutants were compared with values obtained for a typical foggy day each year in December. The levels of these pollutants observed during Diwali were found to be higher due to adverse meteorological conditions, i.e., decrease in 24 h average mixing height, temperature, and wind speed. The trend analysis shows that TSP, PM₁₀, NO₂, and SO₂ concentration increased just before Diwali and reached to a maximum concentration on the day of the festival. The values gradually decreased after the festival. On Diwali day, 24-h values for TSP and PM₁₀ in all the years from 2002 to 2007 and for NO₂ in 2004 and 2007 were found to be higher than prescribed limits of National Ambient Air Quality Standards and exceptionally high (3.6 times) for PM₁₀ in 2007. These results indicate that fireworks during the Diwali festival affected the ambient air quality adversely due to emission and accumulation of TSP, PM₁₀, SO₂, and NO_2.     

Preparation of char from lotus seed biomass and the exploration of its dye removal capacity through batch and column adsorption studies

Char was obtained from lotus seed biomass by a simple single-step acid treatment process. It was used as an adsorbent for the removal of malachite green dye (MG) from simulated dye bath effluent. The adsorbent was characterized for its surface morphology, surface functionalities, and zero point charge. Batch studies were carried out by varying the parameters such as initial aqueous pH, adsorbent dosage, adsorbent particle size, and initial adsorbate concentration. Langmuir and Freundlich isotherms were used to test the isotherm data and the Freundlich isotherm best fitted the data. Thermodynamic studies were carried out and the thermodynamic parameters such as ?G, ?H, and ?S were evaluated. Adsorption kinetics was carried out and the data were tested with pseudofirst-order model, pseudosecond-order model, and intraparticle diffusion model. Adsorption of MG was not solely by intraparticle diffusion but film diffusion also played a major role. Continuous column experiments were also conducted using microcolumn and the spent adsorbent was regenerated using ethanol and was repeatedly used for three cycles in the column to determine the reusability of the regenerated adsorbent. The column data were modeled with the modeling equations such as Adam-Bohart model, Bed Depth Service Time (BDST) model, and Yoon-Nelson model for all the three cycles.     

Eco-friendly dyeing of cotton with brown natural dye extracted from Ficus amplissima Smith leaves

Environmental Chemistry Letters - We have extracted a new brown-coloured natural dye from the leaves of Ficus amplissima Smith using Soxhlet extraction. The dye was assessed for...     

Removal efficiency of fluoride by novel Mg-Cr-Cl layered double hydroxide by batch process from water

The fluoride ion removal from aqueous solution using synthesized Mg-Cr-Cl layered double hydroxide has been reported.Mg-Cr-Cl was characterized by X-ray powder diffraction,Fourier-transform infrared,thermo-gravimetric analysis,differential thermal analysis,and scanning electron microscope.Adsorption experiments were carried out in batch mode as a function of adsorption dosages,contact time,pH,and initial fluoride concentration to get optimum adsorption capacity.The adsorption kinetic study showed that the adsorption process followed first order kinetics.The fluoride removal was 88.5% and 77.4% at pH 7 with an adsorbent dose of 0.6 g/100 mL solution and initial fluoride concentration of 10 mg/L and 100 mg/L,respectively.The equilibrium was established at 40 min.Adsorption experiment data were fitted well with Langmuir isotherm with R 2 = 0.9924.Thermodynamic constants were also measured and concluded that the adsorption process was spontaneous and endothermic in nature.The removal percentage decreased slowly with increasing pH.This process is suitable for industrial effluents.The regeneration of the material is not possible.     

Environmental risk appraisement of disinfection by-products (DBPs) in plant model system: Allium cepa

The organic toxicants formed in chlorinated water cause potential harm to human beings, and it is extensively concentrated all over the world. Various disinfection by-products (DBPs) occur in chlorinated water are genotoxic and carcinogenic. The toxicity is major concern for chlorinated DBPs which has been present more in potable water. The purpose of the work was to evaluate genotoxic properties of DBPs in Allium cepa as a plant model system. The chromosomal aberration and DNA laddering assays were performed to examine the genotoxic effect of trichloroacetic acid (TCAA), trichloromethane (TCM), and tribromomethane (TBM) in a plant system with distinct concentrations, using ethyl methanesulfonate (EMS) as positive control and tap water as negative control. In Allium cepa root growth inhibition test, the inhibition was concentration dependent, and EC₅₀ values for trichloroacetic acid (TCAA), trichloromethane (TCM), and tribromomethane (TBM) were 100 mg/L, 160 mg/L, and 120 mg/L respectively. In the chromosome aberration assay, root tip cells were investigated after 120 h exposure. The bridge formation, sticky chromosomes, vagrant chromosomes, fragmented chromosome, c-anaphase, and multipolarity chromosomal aberrations were seen in anaphase–telophase cells. It was noticed that with enhanced concentrations of DBPs, the total chromosomal aberrations were more frequent. The DNA damage was analyzed in roots of Allium cepa exposed with DBPs (TCAA, TCM, TBM) by DNA laddering. The biochemical assays such as lipid peroxidation, H₂O₂ content, ascorbate peroxidase, guaiacol peroxidase, and catalase were concentration dependent. The DNA interaction studies were performed to examine binding mode of TCAA, TCM, and TBM with DNAs. The DNA interaction was evaluated by spectrophotometric and spectrofluorometric studies which revealed that TCAA, TCM, and TBM might interact with Calf thymus DNA (CT- DNA) by non-traditional intercalation manner.

     

In-vitro toxicity of cyclophosphamide and etoposide intermediates/metabolites produced by three white rot fungi

Aim of the present study is to determine the in-vitro cell cytotoxic effect of native and transformed cancer drugs (cyclophosphamide and etoposide) using three different white rot fungi (Ganoderma lucidum, Phanerochaete chrysosporium and Trametes versicolor). At 3, 6, 9, 12 and 15 days, experiments were done on a mouse monocyte macrophage cell line (Raw 264.7). After biodegradation, the altered compounds were found to be harmful to the Raw 264.7 cells. The maximal cytotoxicity of cyclophosphamide transformed products (TPs) were determined to be 2.4%, 7.3% and 7% respectively, against G. lucidum, P. chrysosporium and T. versicolor, respectively. With G. lucidum, P. chrysosporium and T. versicolor, the etoposide toxicity was 1.5%, 8% and 2.7% respectively. P. chrysosporium-mediated biodegradation resulted in the maximum toxicity, at 8%, on the 12th day for etoposide and 7.3% on the 3rd day for cyclophosphamide. After biodegradation by fungi, the toxicity of these two anticancer agents was reduced in the form of metabolites, but each fungus showed unique capacity for toxicity removal.     

Sources,controls, and probabilistic health risk assessment of fluoride contamination in groundwater from a semi-arid region in Gujarat,Western India: An isotope–hydrogeochemical perspective

Environmental Geochemistry and Health - Fluoride contamination in groundwaters of a rural region in semi-arid Western India has been studied using combination of geochemical-and-isotopic...     

Persistence of carbaryl and its risk assessment through consumption of treated grapes

The average initial deposits of carbaryl were observed to be 1.4 and 3.1?mg?kg^?1, respectively, following four applications of the insecticide at 4.95 and 9.9?kg active ingredient per hectare. Residues of carbaryl dissipated below its limit of quantification of 50?µg?kg^?1 after 7 and 10 days at single and double the application dosage, respectively. The half-life values (t _1/2) of carbaryl were worked out to be 1.3 and 0.7 days, respectively, at single and double dosages. The acceptable daily intake (ADI) for carbaryl has been fixed at 8?µg?kg^?1 body weight per day. Keeping in view the residues of carbaryl observed one day after the last application, a child of 10?kg and an adult of 60?kg will have an intake of 77 and 154?µg carbaryl after consumption of 100 and 200?g grapes, in comparison to its ADI of 80 and 480?µg; thus, no health risk is to be expected. Therefore, a waiting period of 1 day has been suggested for the safe consumption of carbaryl-treated grapes to avoid any health hazards.