Additional steps in mechanical recyling of PET

This study presents the laboratory scale results of an extra step in Poly (ethylene terephthalate) – PET mechanical recycling (grinding, washing, drying and reprocessing): a chemical washing after the conventional one. Cooking oil PET bottle flakes were washed in water and then subjected to a reaction with an aqueous solution of sodium hydroxide 5 M at 90 °C for 10 min (chemical washing). After rinsing and drying, the flakes were characterized by thermogravimetry, gas chromatography and elemental analysis tests. The results indicated that the chemically washed material had higher purity than PET washed only with water: 99.3% and 96.7%, respectively, which undoubtedly implies properties, applications and prices closer to those of virgin resin. The production of purified terephthalic acid (TPA) from the chemical washing residue was optimized and reached a purity of 99.6%. Despite the results, the use of chemically washed PET and of TPA obtained is not recommended for direct contact with food, since they still contain some impurities.     

Public perception of air pollution sources across Europe

Air pollution is one of the primary concerns of our society for its effect on human health and the environment. Among the policy measures that can be put in place to limit air pollutant emissions, end-of-pipe technologies and/or regulatory instruments may be implemented through legislative acts. Also, equally important are behavioural measures, requiring citizens’ active involvement. The success of any measure to limit pollutant emissions requires the acceptance by the citizens that, in turn, implies a correct perception of the main pollutant emission drivers. We present here the comparison between the public perception of air pollution sources and the real-world situation through a survey carried out in seven European countries and involving 16 101 respondents. Our study shows a dramatic underestimation of the contribution of the agri-food sector to air pollution. This result is common to all respondents in the seven countries examined and only to a small extent depends on gender, age and socio-economic status of the respondents.     

Physiological response to etho-ecological stressors in male Alpine chamois: timescale matters!

From a life history perspective, glucocorticoids secreted by the neuroendocrine system, integrating different sources of stress through an adaptive feedback mechanism, may have important consequences on individual fitness. Although stress responses have been the object of several investigations, few studies have explored the role of proximate mechanisms responsible for the potential trade-offs between physiological stress and life history traits integrating social and environmental stressors. In 2011 and 2012, we collected data on faecal cortisol metabolites (FCM) in a marked male population of Alpine chamois, within the Gran Paradiso National Park (Italy). Using a model selection approach we analysed the effect of potential etho-ecological stressors such as age, social status (territorial vs. non-territorial males), minimum temperature, snow depth and precipitation on FCM variation. To correctly interpret environmentally and socially induced stress responses, we conducted model selections over multiple temporal scales defined a priori: year, cold months, spring, warm months, mating season. Over the year, FCM levels showed a negative relationship with minimum temperature, but altogether, climatic stressors had negligible effects on glucocorticoid secretion, possibly owing to good adaptations of chamois to severe weather conditions. Age was negatively related to FCM during the rut, possibly due to greater experience of older males in agonistic contests. Social status was an important determinant of FCM excretion: while both the ‘stress of subordination’ and the ‘stress of domination’ hypotheses received some support in spring and during the mating season, respectively, previous data suggest that only the latter may have detrimental fitness consequences on male chamois.     

A net water production model for ultrafiltration including flow direction reversal and chemically assisted backwashing.

Flow direction reversal (FDR) was proposed as a novel method to increase net water production (NWP) during cross-flow ultrafiltration. The design of the pilot-plant study allowed measurement of specific flux recovery after each chemically assisted backwash (BW) combined with FDR and after each FDR at the midpoint of each BW/FDR cycle. The percent recovery of specific flux was higher following FDR (55%) than combined BW and FDR (53%) at lower chemical dosages; however, the percent increase in specific flux recovery by FDR was much lower (20%) when the chemical dose was doubled. A mathematical model was developed to predict the NWP achieved by any combination ofBW/ FDR and FDR frequency. For example, the advantage of introducing FDR was demonstrated at the lower chlorine dose, whereby the percent increase in NWP by alternating 15-minute intervals of BW/FDR with FDR over BW/ FDR alone was 10% for 30-minute BW/FDR intervals and 2% for 15-minute BW/FDR intervals.     

Interaction of metabolites with R. rhodochrous during the biodegradation of di-ester plasticizers

The commonly used plasticizers di-ethylhexyl phthalate (DEHP) and di-ethylhexyl adipate (DEHA) are known to partially degrade in the presence of soil microorganisms, such as Rhodococcus rhodochrous, releasing persistent and toxic metabolites. The metabolites adipic acid and 2-ethylhexanol were both shown to inhibit growth of the degrading microbe. 2-Ethylhexanol enhanced the activity of ethanol dehydrogenase - an enzyme involved in its metabolism - but the activity of this enzyme was inhibited by adipic acid. The metabolite usually seen in the highest concentrations - 2-ethylhexanoic acid - did not exhibit any evidence of inhibition. It was shown that the high concentration of this metabolite was due to the inability of R. rhodochrous to degrade it. Comparisons with other small carboxylic acids supported the argument that the ethyl branch was the reason for the resistance of 2-ethylhexanoic acid to degradation. The hydrophobicity of the cell surface was shown to be a factor in plasticizer degradation. The primary carbon source could be either water-soluble or hydrophobic and a hydrophobic substrate led to a cell surface that attracted the plasticizer and facilitated degradation. The most hydrophobic of the plasticizers, DEHP, was particularly sensitive to this effect.     

Evaluation of the geotechnical properties of MSW in two Brazilian landfills

The characteristics of municipal solid waste (MSW) play a key role in many aspects of waste disposal facilities and landfills. Because most of a landfill is made up of MSW, the overall stability of the landfill slopes are governed by the strength parameters and physical properties of the MSW. These parameters are also important in interactions involving the waste body and the landfill structures: cover liner, leachate and gas collection systems. On the other hand, the composition of the waste, which affects the geotechnical behavior of the MSW, is dependent on a variety of factors such as climate, disposal technology, the culture and habits of the local community. It is therefore essential that the design and stability evaluations of landfills in each region be performed based on the local conditions and the geotechnical characteristic of the MSW. The Bandeirantes Landfill, BL, in São Paulo and the Metropolitan Center Landfill, MCL, in Salvador, are among the biggest landfills in Brazil. These two disposal facilities have been used for the development of research involving waste mechanics in recent years. Considerable work has been made in the laboratory and in the field to evaluate parameters such as water and organic contents, composition, permeability, and shear strength. This paper shows and analyzes the results of tests performed on these two landfills. The authors believe that these results could be a good reference for certain aspects and geotechnical properties of MSW materials in countries with similar conditions.     

Sediments as a potential tool for assessment of sewage pollution in Barigüi River, Brazil

Sediments constitute a pollutant trap and have proven to be an efficient tool to identify environmental impacts. Sediments are considered a very important means to assess the level of contamination of water bodies because of their ability to accumulate metals and organic. The anthropogenic inputs of sewage, with or without prior treatment, in aquatic environments, affect the geochemical composition of sediment. In addition, the sediment adsorbs hydrophobic compounds found in feces, such as the fecal sterols. The granulometric and geochemical composition of the sediment of Barigüi River-Brazil was investigated. The results show that silt and clay dominate the granulometric composition of the sediments. The geochemical composition of sediments showed high concentrations of phosphorus and nitrogen. The Redfield ratios confirm the inputs of phosphorus and nitrogen. The TOC/N ratio was used to identify the source of pollution. N/TP ratios were found between 1.0 and 3.5. Clearly, an input of phosphorus, sewage is the most acceptable source, following the historic profile of the Barigüi River. High concentration of nitrogen phosphorus labels the area to be polluted by sewage. To confirm the sewage pollution, adsorbed fecal sterols in sediments were investigated. The concentration of total sterols was found between 0.86 and 304.58 μg g^???1. Two distinguished scenario was found, one severely polluted and another slightly polluted. The highest concentrations of total fecal sterols were associated with sediment whose geochemical composition showed higher levels of TOC, as well as higher proportions of silt and clay. Also, epicoprostanol, a coprostanol isomer, was used as an indicator of the level of treatment or age of the fecal matter because it is formed during the treatment of wastewater and sludge digestion. If the treatment of sludge takes a long time, epicoprostanol can form from cholesterol, and relative proportions of those compounds may be used as an indicator of the presence of untreated sewage in the sediments. The epicoprostanol was found in the range between 0.02 and 9.71 μg g^???1; concentration of up to 0.015 μg g^???1 represents situations where there is strong contamination by sewage. All sites investigated showed a concentration of epicoprostanol higher than the value adopted as threshold. The lower concentration of epicoprostanol found for all sites is consistent with the high concentration found for coprostanol, and this is typical for untreated sewage.     

Determination of trace transition metals in environmental matrices by chelation ion chromatography

Trace transition metals (Fe^3?+?, Mn, Cu, Cd, Co, Zn, Ni) in environmental samples were analyzed by chelation ion chromatography using a mixed bed ion-exchange column with pyridine-2,6-dicarboxylic acid (PDCA) and oxalic acid as eluent and large volume direct injection (1,000 ??l). The two eluents, PDCA and oxalic acid, were tested, and repeatability and detection limits were compared. The total analysis time was ~15 min. The separation with PDCA was more successful than that obtained with acid oxalic. It was observed that utilizing PDCA resulted in lower detection limits, higher repeatability, and a quantitative detection of Cd and Mn, which coelute as a single peak when using the oxalic acid. At last, the PDCA calibration graphs resulted linear (r ²?>?0.999) in the range 0.4?C1,000 ??g/L. The procedure was applied to the analysis of metals in soils and in water samples. The results obtained from the analysis of natural waters have demonstrated that the method is simple and efficient, therefore, can be used for the determination of metals in natural waters using a continuous and automatic monitoring system.