Time-resolved measurements of PM2.5 carbonaceous aerosols at Gosan, Korea

In order to better understand the characteristics of atmospheric carbonaceous aerosol at a background site in Northeast Asia, semicontinuous organic carbon (OC) and elemental carbon (EC), and time-resolved water-soluble organic carbon (WSOC) were measured by a Sunset OC/ EC and a PILS-TOC (particle-into-liquid sampler coupled with an online total organic carbon) analyzer, respectively, at the Gosan supersite on Jeju Island, Korea, in the summer (May 28-June 17) and fall (August 24-September 30) of 2009. Hourly average OC concentration varied in the range of approximately 0.87-28.38 microgC m-3, with a mean of 4.07+/- 2.60 microgC m-3, while the hourly average EC concentration ranged approximately from 0.04 to 8.19 .microgC m-3, with a mean of 1.35 +/- 0.71 microgC m-3, from May 28 to June 17, 2009. During the fall season, OC varied in the approximate range 0.9-9.6 microgC m-3, with a mean of 2.30 +/-0.80 microgC m-3, whereas EC ranged approximately from 0.01 to 5.40 microgC m-3, with a mean of 0.66 +/- 0.38 microgC m-3. Average contributions of EC to TC and WSOC to OC were 26.0% +/- 9.7% and 20.6% +/-7.4%, and 37.6% +/- 23.5% and 57.2% +/- 22.2% during summer and fall seasons, respectively. As expected, clear diurnal variation of WSOC/OC was found in summer, varying from 0.22 during the nighttime up to 0.72 during the daytime, mainly due to the photo-oxidation process. In order to investigate the effect of air mass pathway on the characteristics of carbonaceous aerosol, 5-day back-trajectory analysis was conducted using the HYSPLIT model. The air mass pathways were classified into four types: Continental (CC), Marine (M), East Sea (ES) and Korean Peninsula (KP). The highest OC/EC ratio of 3.63 was observed when air mass originated from the Continental area (CC). The lowest OC/EC ratio of 0.79 was measured when air mass originated from the Marine area (M). A high OC concentration was occasionally observed at Gosan due to local biomass burning activities. The contribution of secondary OC to total OC varied approximately between 8.4% and 32.2% and depended on air mass type.     

Spatial and temporal variations in NO2 distributions over Beijing,China measured by imaging differential optical absorption spectroscopy

During the CAREBEIJING campaign in 2006, imaging differential optical absorption spectroscopy (I-DOAS) measurements were made from 08:00 to 16:00 on September 9 and 10 over Beijing, China. Detailed images of the near-surface NO₂ differential slant column density (DSCD) distribution over Beijing were obtained. Images with less than a 30-min temporal resolution showed both horizontal and vertical variations in NO₂ distributions. For DSCD to mixing ratio conversion, path length along the lines of I-DOAS lines of sight was estimated using the light-extinction coefficient and Ångstrom exponent data obtained by a transmissometer and a sunphotometer, respectively. Mixing ratios measured by an in-situ NO₂ analyzer were compared with those estimated by the I-DOAS instrument. The obtained temporal and spatial variations in NO₂ distributions measured by I-DOAS for the two days are interpreted with consideration of the locations of the major NO_x sources and local wind conditions. I-DOAS measurements have been applied in this study for estimating NO₂ distribution over an urban area with multiple and distributed emission sources. Results are obtained for estimated temporal and spatial NO₂ distributions over the urban atmosphere; demonstrating the capability of the I-DOAS technique. We discuss in this paper the use of I-DOAS measurements to estimate the NO₂ distribution over an urban area with multiple distributed emission sources.     

Factors driving deforestation in common-pool resources in northern Mexico

The theory of collective action has been extensively used to explain the relationship between common-based property regimes and the conservation of natural resources. However, there are two key components of the theory that literature reports as puzzles in which no consensus exists about their effect on the performance of common-pool resources. These are group size and heterogeneity. This study analyzes the effects of these two key components on the effectiveness of community-based forestry, called ejidos, to protect their forest resources in northern Mexico. We used a multinomial logit model to determine the contribution of 16 explanatory variables to the dependent variable, a measure of success of ejidos defined by the presence of deforested, degraded, or forested conditions. The results show that corn yield, marginality, percent of forest area, total population, a forest value index, distance to markets, roads and towns, were all statistically significant in driving deforested conditions. Deforestation becomes more attractive for poor communities and as corn yield and distance to towns, roads, and markets decrease. In general, group size and heterogeneity had no significant effects on the presence of deforested conditions. Deforestation is driven by resource-specific characteristics, such as location and soil productivity, not by ejidos' attributes, such as total area or number of members. We argue that current institutional policies focusing on the structure of property right arrangements should be shifted (1) to provide better technology for land cultivation; (2) to reduce the marginality problem in poor communities; and (3) to strengthen local institutions.     

Development of a water quality loading index based on water quality modeling

Water quality modeling is an ideal tool for simulating physical, chemical, and biological changes in aquatic systems. It has been utilized in a number of GIS-based water quality management and analysis applications. However, there is considerable need for a decision-making process to translate the modeling result into an understandable form and thereby help users to make relevant judgments and decisions. This paper introduces a water quality index termed QUAL2E water quality loading index (QWQLI). This new WQI is based on water quality modeling by QUAL2E, which is a popular steady-state model for the water quality of rivers and streams. An experiment applying the index to the Sapgyo River in Korea was implemented. Unlike other WQIs, the proposed index is specifically used for simulated water quality using QUAL2E to mainly reflect pollutant loading levels. Based on the index, an iterative modeling-judgment process was designed to make decisions to decrease input pollutants from pollutant sources. Furthermore, an indexing and decision analysis can be performed in a GIS framework, which can provide various spatial analyses. This can facilitate the decision-making process under various scenarios considering spatial variability. The result shows that the index can evaluate and classify the simulation results using QUAL2E and that it can effectively identify the elements that should be improved in the decision-making process. In addition, the results imply that further study should be carried out to automate algorithms and subsidiary programs supporting the decision-making process.     

The impact of nudging coefficient for the initialization on the atmospheric flow field and the photochemical ozone concentration of Seoul,Korea

In order to incorporate correctly the large or local scale circulation in the model, a nudging term is introduced into the equation of motion. Nudging effects should be included properly in the model to reduce the uncertainties and improve the air flow field. To improve the meteorological components, the nudging coefficient should perform the adequate influence on complex area for the model initialization technique which related to data reliability and error suppression. Several numerical experiments have been undertaken in order to evaluate the effects on air quality modeling by comparing the performance of the meteorological result with variable nudging coefficient experiment. All experiments are calculated by the upper wind conditions (synoptic or asynoptic condition), respectively. Consequently, it is important to examine the model response to nudging effect of wind and mass information. The MM5–CMAQ model was used to assess the ozone differences in each case, during the episode day in Seoul, Korea and we revealed that there were large differences in the ozone concentration for each run.These results suggest that for the appropriate simulation of large or small-scale circulations, nudging considering the synoptic and asynoptic nudging coefficient does have a clear advantage over dynamic initialization, so appropriate limitation of these nudging coefficient values on its upper wind conditions is necessary before making an assessment. The statistical verifications showed that adequate nudging coefficient for both wind and temperature data throughout the model had a consistently positive impact on the atmospheric and air quality field. On the case dominated by large-scale circulation, a large nudging coefficient shows a minor improvement in the atmospheric and air quality field. However, when small-scale convection is present, the large nudging coefficient produces consistent improvement in the atmospheric and air quality field.     

Valuation of Spatial Configurations and Forest Types in the Southern Appalachian Highlands

Site-specific estimates of the values of spatial configuration and forest composition are presented. Amenity values of forest patches are found to vary the most by urban and sprawling development patterns of specific areas and forest types. For example, smaller patches of deciduous forest are more highly valued in the urban and sprawling areas of Greensboro, North Carolina, whereas larger patches of deciduous forest are more highly valued in the urban and sprawling areas of Greenville, South Carolina. Within the Greenville and Greensboro areas, visible landscape complexity is highly valued for deciduous and evergreen forest patches, whereas lower visible landscape complexity, i.e., smoothly trimmed forest patch boundaries, is highly valued for mixed forest patches.     

Application of recycled paper sludge and biomass materials in manufacture of green composite pallet

Rice straw, rice husk and paper sludge are by-products and industrial waste, and are beneficial resources as raw biomass materials used for manufacturing value-added composite products. We investigated the effect on selected mechanical properties of adding rice straw, rice husk and paper sludge to wood composites to replace wood particles for manufacturing green pallets. Results showed that increasing the contents of rice straw and rice husk dramatically decreased the mechanical strength of the composites. This is because the wax and silicate coating of these materials obstructed the strong bonding with UF resin. When 10 wt.% of wood particle was replaced with 10 wt.% of paper sludge, the wood–paper sludge composites showed similar mechanical properties to those of wood particle. Wood particle can be replaced by 10 wt.% of dried paper sludge in accordance with the minimum requirement recommended by standards in green pallet manufacturing.     

Application of TRIZ creativity intensification approach to chemical process safety

This study develops a modified method of TRIZ to improve safety in chemical process design. This method is modified by the theory of TRIZ, which is inventive problem solving theory, for retrofit design of chemical process considering safety.The original TRIZ is difficult to access to chemical process safety due to inapplicability and ambiguity of terminology in classification of these parameters. It is necessary to be modified TRIZ for chemical process safety. This study reorganized thirty-nine parameters of the TRIZ into six categories such as mechanic, operator, process upset, design, natural hazard and material. The modified TRIZ is tested to jacketed reactor and polyethylene reactor.     

Methane production potential of leachate generated from Korean food waste recycling facilities: a lab-scale study

This paper examines the applicability of food waste leachate (FWL) in bioreactor landfills or anaerobic digesters to produce methane as a sustainable solution to the persisting leachate management problem in Korea. Taking into account the climatic conditions in Korea and FWL characteristics, the effect of key parameters, viz., temperature, alkalinity and salinity on methane yield was investigated. The monthly average moisture content and the ratio of volatile solids to total solids of the FWL were found to be 84% and 91%, respectively. The biochemical methane potential experiment under standard digestion conditions showed the methane yield of FWL to be 358 and 478 ml/g VS after 10 and 28 days of digestion, respectively, with an average methane content of 70%. Elemental analysis showed the chemical composition of FWL to be C(13.02)H(23.01)O(5.93)N(1). The highest methane yield of 403 ml/g VS was obtained at 35 degrees C due to the adaptation of seed microorganisms to mesophilic atmosphere, while methane yields at 25, 45 and 55 degrees C were 370, 351 and 275 ml/g VS, respectively, at the end of 20 days. Addition of alkalinity had a favorable effect on the methane yield. Dilution of FWL with salinity of 2g/l NaCl resulted in 561 ml CH(4)/g VS at the end of 30 days. Considering its high biodegradability (82.6%) and methane production potential, anaerobic digestion of FWL in bioreactor landfills or anaerobic digesters with a preferred control of alkalinity and salinity can be considered as a sustainable solution to the present emergent problem.     

Behavior of PAHs from sewage sludge incinerators in Korea

Although production of sewage sludge increases every year, its proper treatment has only been recently raised as a new issue, as current landfill and ocean dumping arrangements are expected to become increasingly difficult to manage in the future. The Korean Ministry of Environment plans to diversify its processing facilities and expand its processing systems by 2011, with the purpose of processing all sludge produced in Korea. According to this plan, incineration (including incineration of municipal wastes) will process 30% of the entire sewage sludge throughout the country in 2011. This study reviews the characteristics of PAH, which is one of the organic substances found in sewage sludge during the incinerating process. The total amount of PAH produced from sewage sludge incineration was found to be 6.103 mg/kg on average, and investigation performed on 16 PAHs of inlets and outlets of the air control devices at five full-scale incineration facilities showed that concentrations of the PAHs on the inlet and on the outlet ranged from 3.926 to 925.748 microg/m(3) and from 1.153 to 189.449 microg/m(3), respectively. In the case of the incineration facility fed with municipal waste (95%) and sewage sludge (5%), the total of the PAH emissions concentration was higher than that found at the incineration facilities used exclusively to treat sewage. The combustion of waste vinyl and plastics contained in municipal waste fed into the facility might contribute to the high levels of PAHs in the stack gas. However more investigation is needed on the production mechanism of PAHs at different operating conditions of the incineration facilities, such as the types of waste, and other relevant factors.