Evaluating aquacultural use of thermal effluents: An application of system dynamics to environmental problem solving

Given the ecological burden imposed by power plants located in the coastal zone, efforts to improve the marginal benefits realized from their operation are warranted. Indeed, if this source of environmental pollution can be utilized to compensate for past ecological damage, then the benefits will be magnified many-fold.This study addresses the economic feasibility of utilizing heated effluent water from power plants to invigorate the growth of oysters raised under controlled conditions. The preliminary findings indicate that given proper combinations of system capacity, supplemental nutrient supplies, sea water flow and temperature gradients, such an operation is feasible.This is also a demonstration of a viable application of a sophisticated computer modeling approach to environmental problems. System Dynamics a technique pioneered at the Massachusetts Institute of Technology, is applied to evaluate the physical, biological, and economic interrelationships of the aquacultural system variables. It offers many advantages for the environmental manager and researcher, a number of which are realized in the present investigation.     

Electrochemical or UV-photochemical oxidation of industrial wastes containing polar aromatic sulphonates

BACKGROUND AND INTENTION: Aromatic sulphonates other than surfactants and their hydroxy and amino-derivatives are important intermediates for the production of azo dyes. Their production on a large scale can be detrimental for the environment, if the by-products of their synthesis are not disposed of appropriately. An industrial waste, the organic components of which were mainly amino and hydroxy-substituted aromatic sulphonates, seriously endangers the environment close to an dismissed Italian industrial site. Inorganic sulphates and chlorides contained in the waste seriously hinder its disposal by incineration, since they corrode furnace walls. In this work, preliminary exploration of aqueous-phase electrochemically and photochemically induced oxidation techniques have been performed as possible alternatives to incineration. METHODS: Electrochemically-induced oxidation was experimented on individual aromatic sulphonates and on an industrial waste by electrolysing them between smooth platinum electrodes at low temperature (5 degrees C) and high current densities (0.4 A/cm2) with aqueous 0.5 M NaHSO4 electrolyte. Photochemically-induced oxidation was performed by irradiating individual aromatic sulphonates or industrial waste with a 500 W mercury lamp in the presence of sodium peroxydisulphate. RESULTS AND DISCUSSION: After 200 min electrodegradation, 90% of the original compounds disappeared, while 50% Total Organic Carbon (TOC) of an industrial waste was removed from solution after 10 hours. After 180 min UV-photodegradation, 90% of two test aromatic sulphonates disappeared, while 65% of TOC of industrial waste was removed after 5 hours. CONCLUSIONS: Two methods, electrochemical and UV-persulphate oxidation of an industrial waste, were used in order to propose a disposal procedure alternative to incineration. Electrodegradation with smooth Pt anode in 0.5 M NaHSO4 at 5 degrees C halved TOC concentration within 10 hours, while persulphate-assisted UV-photochemical oxidation with a 500 W high pressure Hg lamp abated two-thirds of TOC concentration after 5 hours. Energetic consumption of electrodegradation was 0.33 kWh/g TOC, while that of photooxidation was larger than 2 kWh/g TOC. Although both techniques can be considered efficient from a purely chemical point of view, since both are capable of wet-oxidising the aromatic sulphonates and the industrial waste, electrodegradation seems more promising than a photochemical degradation if economical considerations are also taken into account. Considering also that neither cell design nor catalyst were optimised in this preliminary study, the energy yield of electrodegradation seems likely to be largely improved.     

Fractionation of elements by particle size of ashes ejected from Copahue Volcano,Argentina

The volcano Copahue, Neuquén province, Argentina has shown infrequent explosive eruptions since the 18th century. Recently, eruptive activity and seismicity were registered in the period July-October, 2000. As a consequence, ash clouds were dispersed by winds and affected Caviahue village located at about 9 km east of the volcano. Samples of deposited particles from this area were collected during this episode for their chemical analysis to determine elements of concern with respect to the health of the local population and its environment. Different techniques were used to evaluate the distribution of elements in four particle size ranges from 36 to 300 microm. X-ray powder diffraction (XRD) was selected to detect major components namely, minerals, silicate glass, fragments of rocks and sulfurs. Major and minor elements (Al, Ca, Cl, Fe, K, Mg, Mn, Na, S, Si and Ti), were detected by energy dispersive X ray analysis (EDAX). Trace element (As, Cd, Cr, Cu, Hg, Ni, Pb, Sb, U, V and Zn) content was quantified by inductively coupled plasma-mass spectrometry (ICP-MS). Nuclear activation analysis (NAA) was employed for the determination of Ce, Co, Cs, Eu, Hf, La, Lu, Rb, Sc, Sm, Ta and Yb. An enrichment was observed in the smallest size fraction of volcanic ashes for four elements (As, Cd, Cu and Sb) of particular interest from the environmental and human health point of view.     

The European Water Framework Directive: Water Quality Classification and Implications to Engineering Planning

The European Water framework directive (WFD) is probably the most important environmental management directive that has been enacted over the last decade in the European Union. The directive aims at achieving an overall good ecological status in all European water bodies. In this article, we discuss the implementation steps of the WFD and their implications for environmental engineering practice while focusing on rivers as the main receiving waters. Arising challenges for engineers and scientists are seen in the quantitative assessment of water quality, where standardized systems are needed to estimate the biological status. This is equally of concern in engineering planning, where the prediction of ecological impacts is required. Studies dealing with both classification and prediction of the ecological water quality are reviewed. Further, the combined emission–water quality approach is discussed. Common understanding of this combined approach is to apply the most stringent of either water quality or emission standard to a certain case. In contrast, for example, the Austrian water act enables the application of only the water quality based approach - at least on a temporary basis.     

Preparation and characterization of polycaprolactone nanocapsules containing pretilachlor as a herbicide nanocarrier

Polycaprolactone nanocapsules (PCL) containing pretilachlor were prepared, and Fourier transform infrared spectroscopy, atomic force microscopy, and transmission electron microscopy were used for their structural and morphological investigations. The results revealed that the nanocapsules had irregular shape and their particles size was in the range of 70–200 nm. The encapsulation efficiency of pretilachlor was measured as 99.5 ± 1.3% using high-performance liquid chromatography analysis. The physicochemical stability studies over 60 days showed that the nanocapsules were stable in the suspension without any aggregation. The herbicide activity was examined in a pre-emergence manner using barnyard grass as a target plant and rice as a non-target plant. The nanoformulation had no negative effect on rice plant. However, its effect on barnyard grass was significant. The cytotoxicity analysis indicated that the nanocapsulated herbicide is less toxic rather than the commercial formulation. Therefore, encapsulation of pretilachlor in PCL nanocapsules can be used effectively to construct environmentally friendly PCL-herbicide systems in agriculture.

     

Pelvic restraint cushion sled test evaluation of pelvic forward motion

Objective: This study was designed to evaluate the performance of a pelvic restraint cushion (PRC), a submarining countermeasure that deploys under the thighs when a crash is detected in order to block the forward motion of the pelvis.

Methods: Sled tests approximating low- and high-speed frontal impacts were conducted with 4 female postmortem human subjects (PMHS) restrained by a lap and shoulder belt in the right front passenger seat. The subjects were tested with and without a PRC.

Results: The PRC is effective in reducing forward motion of the PMHS pelvis and reduces the risk of injury due to lap belt loading in a high-speed frontal crash.

Conclusions: Although small sample size limits the utility of the study's findings, the results suggest that the PRC can limit pelvic forward motion and that pelvic injury due to PRC deployment is not likely.     

Environmental injustice and flood risk: a conceptual model and case comparison of metropolitan Miami and Houston,USA

Regional Environmental Change - This article outlines a conceptual model and comparatively applies it to results from environmental justice (EJ) studies of flood risk in the Miami, Florida, and...     

Laboratory investigation of <Emphasis Type="Italic">Fallopia</Emphasis> × <Emphasis Type="Italic">bohemica</Emphasis> fruits dispersal by watercourses

Seed and fruit dispersal along watercourses favours the long-distance migration of invasive species, not only for aquatic or wetland species, but also for terrestrial wind-dispersed plants, like the Japanese knotweed. The present paper aims at investigating the role of watercourses in the dispersal of the knotweed due to its frequent occurrence on riverbanks and production of fertile achenes (type of fruit of the Japanese knotweed). This dispersal occurs along two steps after the fruits deposit on the water surface: floatation first and then sinking towards the bottom of the watercourse. Regarding the first step, the effects of agitation of the water, temperature, surface tension and luminosity on the achenes floatability are experimentally studied. While no influence of luminosity is observed, an increase of temperature greatly decreases the floating time. Floating time also decreases as the contact between water and the fruit is enhanced (through submersion of achenes, agitation of the water or lower surface tension). Regarding the second step, the fall velocity of the fruits in water at rest is measured and appears to be independent of the seed history (floating time). 3D helical motions are systematically observed with constant tangential velocity with respect to the falling velocity. The trajectory of the fruits in a shear flow is then measured and the evolution of their velocity components along the sinking process is discussed. Finally, the contribution of both steps to the long-distance migration of the seeds is estimated.     

Revising REACH guidance on information requirements and chemical safety assessment for engineered nanomaterials for aquatic ecotoxicity endpoints: recommendations from the EnvNano project

The European Chemical Agency (ECHA) is in the process of revising its guidance documents on how to address the challenges of ecotoxicological testing of nanomaterials. In these revisions, outset is taken in the hypothesis that ecotoxicological test methods, developed for soluble chemicals, can be made applicable to nanomaterials. European Research Council project EnvNano—Environmental Effects and Risk Evaluation of Engineered, which ran from 2011 to 2016, took another outset by assuming that: “The behaviour of nanoparticles in suspension is fundamentally different from that of chemicals in solution”. The aim of this paper is to present the findings of the EnvNano project and through these provide the scientific background for specific recommendations on how ECHA guidance could be further improved. Key EnvNano findings such as the need to characterize dispersion and dissolution rates in stock and test media have partially been addressed in the updated guidance. However, it has to be made clear that multiple characterization methods have to be applied to describe state of dispersion and dissolution over time and for various test concentration. More detailed information is called for on the specific characterization methods and techniques available and their pros and cons. Based on findings in EnvNano, we recommend that existing algal tests are supplemented with tests where suspensions of nanomaterials are aged for 1–3 days for nanomaterials that dissolve in testing media. Likewise, for daphnia tests we suggest to supplement with tests where (a) exposure is shortened to a 3 h pulse exposure in daphnia toxicity tests with environmentally hazardous metal and metal oxide nanomaterials prone to dissolution; and (b) food abundance is three to five times higher than normal, respectively. We further suggest that the importance of considering the impact of shading in algal tests is made more detailed in the guidance and that it is specified that determination of uptake, depuration and trophic transfer of nanomaterials for each commercialized functionalization of the nanomaterials is required. Finally, as an outcome of the project a method for assessing the regulatory adequacy of ecotoxicological studies of nanomaterials is proposed.     

Corrosion-induced release of Cu and Zn into rainwater from brass, bronze and their pure metals. A 2-year field study

A 2-year field study has been conducted in an urban environment to provide annual release rates of copper and zinc from brass (20 wt% Zn) and copper and tin from bronze (6 wt% Sn) compared to sheets of their pure alloy constituents, copper and zinc. Despite relatively low nominal bulk alloy content, substantially more zinc was released from brass compared to copper. Both metals were released at a significantly slower rate from the brass alloy, compared to the pure metals. The proportion of release rates of copper and zinc from the alloy differed significantly from their proportions in the bulk alloy. Bronze showed relatively constant release rates of copper, being similar to that of pure copper sheet. The release of tin from bronze was negligible. The results clearly show that alloys and the pure metals behave very differently when exposed to rainwater. Accordingly, release rates from pure metals cannot be used to predict release rates of individual constituents from their alloys. Generated data are of importance within REACH, the new chemical policy of the European commission, where metal alloys erroneously are being treated as mixtures of chemical substances.