Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO₂)), cerium(IV) oxide (CeO₂) and iron(II, III) oxide (Fe₃O₄) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO₂ NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO₂ NPs, whereas cholinesterase activity significantly increased after CeO₂ NP and Fe₃O₄ NP exposure. Catalase activity significantly increased in larvae exposed to Fe₃O₄ NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.     

Feasibility of the hydrogen sulfide test for the assessment of drinking water quality in post-earthquake Haiti

In 2010, a magnitude 7.0 earthquake struck Haiti, severely damaging the drinking and wastewater infrastructure and leaving millions homeless. Compounding this problem, the introduction of Vibrio cholerae resulted in a massive cholera outbreak that infected over 700,000 people and threatened the safety of Haiti’s drinking water. To mitigate this public health crisis, non-government organizations installed thousands of wells to provide communities with safe drinking water. However, despite increased access, Haiti currently lacks the monitoring capacity to assure the microbial safety of any of its water resources. For these reasons, this study was designed to assess the feasibility of using a simple, low-cost method to detect indicators of fecal contamination of drinking water that could be implemented at the community level. Water samples from 358 sources of drinking water in the Léogâne flood basin were screened with a commercially available hydrogen sulfide test and a standard membrane method for the enumeration of thermotolerant coliforms. When compared with the gold standard method, the hydrogen sulfide test had a sensitivity of 65 % and a specificity of 93 %. While the sensitivity of the assay increased at higher fecal coliform concentrations, it never exceeded 88 %, even with fecal coliform concentrations greater than 100 colony-forming units per 100 ml. While its simplicity makes the hydrogen sulfide test attractive for assessing water quality in low-resource settings, the low sensitivity raises concerns about its use as the sole indicator of the presence or absence of fecal coliforms in individual or community water sources.     

Marginal Abatement Costs and Marginal Welfare Costs for Greenhouse Gas Emissions Reductions: Results from the EPPA Model

Marginal abatement cost (MAC) curves, relationships between tonnes of emissions abated and the CO₂ (or greenhouse gas (GHG)) price, have been widely used as pedagogic devices to illustrate simple economic concepts such as the benefits of emissions trading. They have also been used to produce reduced-form models to examine situations where solving the more complex model underlying the MAC is difficult. Some important issues arise in such applications: (1) Are MAC relationships independent of what happens in other regions?, (2) are MACs stable through time regardless of what policies have been implemented in the past?, and (3) can one approximate welfare costs from MACs? This paper explores the basic characteristics of MAC and marginal welfare cost (MWC) curves, deriving them using the MIT Emissions Prediction and Policy Analysis model. We find that, depending on the method used to construct them, MACs are affected by policies abroad. They are also dependent on policies in place in the past and depend on whether they are CO₂-only or include all GHGs. Further, we find that MACs are, in general, not closely related to MWCs and therefore should not be used to derive estimates of welfare change. We also show that, as commonly constructed, MACs may be unreliable in replicating results of the parent model when used to simulate GHG policies. This is especially true if the policy simulations differ from the conditions under which the MACs were simulated.     

Monitoring of Coliforms and chlorine residual in water distribution network of Rawalpindi, Pakistan

The present study was undertaken to examine the drinking water quality of Rawal Treatment Plant, Rawalpindi and its distribution network by collecting samples from eight different locations. The aim was to determine potential relationship between the presence of microorganisms and chlorine residual in the distribution network. Quantification of chlorine residual, turbidity, standard plate count (SPC), fecal and total coliforms by Most Probable Number (MPN) was performed. Three different forms of chlorine were measured at each sampling station such as free chlorine, residual chlorine, chloramines and total chlorine residual. A critical evaluation of data presented indicated that pH generally ranged from 7.02–7.30; turbidity varied from 0.34–2.79 NTU; conductivity fluctuated from 359–374 μS/cm; and TDS values were found to be ranging between 180–187 mg/l. Station # 7 was found to be most contaminated. The value of total chlorine was found to be 0.86 to1.7 mg/l at Station # 3 and 6, respectively. Highest standard plate count was 62 CFU/ml at Station # 7. Total coliforms were less than 1.1 MPN/100 ml at almost most of the stations except at Station # 3 where it was found to be greater than 23.0 MPN /100 ml. Overall aim of this study is to create awareness about contamination of drinking water in the water distribution networks and to make recommendations to provincial agencies such as EPA, CDA and WASA that regular monitoring should be carried out to ensure that the chlorine residual is available at consumer end.     

Nitrogen and phosphorus attenuation within the stream network of a coastal, agricultural watershed

Streams alter the concentration of nutrients they transport and thereby influence nutrient loading to estuaries downstream; however, the relationship between in-stream uptake, discharge variability, and subsequent nutrient export is poorly understood. In this study, in-stream N and P uptake were examined in the stream network draining a row-crop agricultural operation in coastal North Carolina. The effect of in-stream nutrient uptake on estuarine loading was examined using continuous measurements of watershed nutrient export. From August to December 2003, 52 and 83% of the NH4+ and PO4(3-) loads were exported during storms while concurrent storm flow volume was 34% of the total. Whole-ecosystem mass transfer velocities (Vf) of NH4+ and PO4(3-), measured using short-term additions of inorganic nutrients, ranged from 0.1 to 25 mm min(-1). Using a mass balance approach, this in-stream uptake was found to attenuate 65 to 98% of the NH4+ flux and 78 to 98% of the PO4(3-) flux in small, first-order drainage ditches. For the larger channel downstream, an empirical model based on Vf and discharge was developed to estimate the percentage of the nutrient load retained in-stream. The model predicted that all of the upstream NH4+ and PO4(3-) load was retained during base flow, while 65 and 37% of the NH4+ and PO4(3-) load was retained during storms. Remineralization from the streambed (vs. terrestrial sources) was the apparent source of NH4+ and PO4(3-) to the estuary during base flow. In-stream uptake reduced the dissolved inorganic N to dissolved inorganic P ratio of water exported to the N-limited estuary, thus limiting the potential for estuarine phytoplankton growth.     

Place-based local governance and sustainable communities: lessons from Canadian biosphere reserves

The quest for sustainable communities might be fostered by a new ‘place-based’ governing approach that engages civil society and other actors in local decision-making processes. In Canada, lessons can be learned from the establishment and maintenance of biosphere reserves by networks of local communities of interests and other organisations. Biosphere reserves are created to promote conservation, biodiversity and sustainable livelihoods. Municipal and public participation in these reserves can be encouraged, promoting a local sense of place as well as sustainable community and regional development. An examination of two Canadian biosphere reserves, Riding Mountain and Long Point, illustrates how local governments and these reserves might assist each other in their mutual goals of long-term sustainability while offering a worthwhile model of local collaborative, place-based governance.     

Development and Climate Change: A Mainstreaming Approach for Assessing Economic,Social, and Environmental Impacts of Adaptation Measures

The paper introduces the so-called climate change mainstreaming approach, where vulnerability and adaptation measures are assessed in the context of general development policy objectives. The approach is based on the application of a limited set of indicators. These indicators are selected as representatives of focal development policy objectives, and a stepwise approach for addressing climate change impacts, development linkages, and the economic, social and environmental dimensions related to vulnerability and adaptation are introduced. Within this context it is illustrated using three case studies how development policy indicators in practice can be used to assess climate change impacts and adaptation measures based on three case studies, namely a road project in flood prone areas of Mozambique, rainwater harvesting in the agricultural sector in Tanzania and malaria protection in Tanzania. The conclusions of the paper confirm that climate risks can be reduced at relatively low costs, but the uncertainty is still remaining about some of the wider development impacts of implementing climate change adaptation measures.     

Fate and Transport Modeling of Potential Pathogens: The Contribution From Sediments1

Abstract: Escherichia coli was used as a bacterial tracer for the development, calibration, and validation of a watershed scale fate and transport model to be extended to a suite of reference pathogens (Cryptosporidium, Giardia, Campylobacter, E. coli O157:H7). E. coli densities in water and sediments from the Blackstone River Watershed, Massachusetts, were measured at three sites for a total of five wet weather events and three dry weather events covering three seasons. The confirmed E. coli strains were identified by ribotyping for tracking the sources of E. coli and for determining the association of downstream E. coli isolates with isolates from upstream sediments. A large number of downstream samples were associated with upstream sediment sources of E. coli. E. coli densities ranged from 71 to 6,401 MPN/100 ml in water samples and from 2 to 335 MPN/g in sediments. Pearson correlation analysis revealed significant correlations between E. coli and total coliforms in water (r = 0.777, p < 0.01) and sediments (r = 0.728, p < 0.01). In addition, E. coli concentrations in water were weakly correlated with sediment particle size and sediment concentrations (r = 0.298, p < 0.01). A hydrologic model, WATFLOOD/SPL9, was used to predict the temporal and spatial variation of E. coli in the Blackstone River. The rapid rise of stream E. coli densities was more accurately predicted by the model with the inclusion of sediment resuspension, thus demonstrating the importance of the process.     

Seasonal variation of heavy metals in ambient air and precipitation at a single site in Washington, DC

Atmospheric samples of precipitation and ambient air were collected at a single site in Washington, DC, for 7 months (for ambient air samples) and 1 year (for wet deposition samples) and analyzed for arsenic, cadmium, chromium and lead. The ranges of heavy metal concentrations for 6-day wet deposition samples collected over the 1-year period were 0.20-1.3 microg/l, 0.060-5.1 microg/l, 0.062-4.6 microg/l and 0.11-3.2 microg/l for arsenic, cadmium, chromium and lead, respectively, with a precision better than 5% for more than 95% of the measurements. The ranges of heavy metal concentrations for the 6-day ambient air samples were 0.800-15.7 ng/m(3), 1.50-30.0 ng/m(3), 16.8-112 ng/m(3), and 2.90-137 ng/m(3) for arsenic, cadmium, chromium and lead, respectively, with a precision better than 10%. The spread in the heavy metal concentration over the observation period suggests a high seasonal variability for heavy metal content in both ambient air and wet deposition samples.     

Avoidance test with Enchytraeus albidus (Enchytraeidae): effects of different exposure time and soil properties

Enchytraeids are ecologically relevant soil species and are commonly used in standardized toxicity tests. Their rapid reaction to a chemical exposure can be used as a toxicological measurement endpoint that assesses the avoidance behavior. The objectives of this investigation were to determine the effects of soil properties on the avoidance behavior of Enchytraeus albidus and to optimize the duration of avoidance test. The avoidance tests included (1) exposures in OECD artificial soil with standard or modified properties (pH, clay or peat content), and (2) exposures to copper chloride, cadmium chloride, and to the organic pesticides dimethoate and phenmedipham for different time periods. Results showed that alteration of OECD soil constituents significantly affected the avoidance behavior of enchytraeids, and that the 48-h exposure was the optimal duration of the test. Consideration of soil properties is important for selecting appropriate experimental design and interpreting the results of the enchytraeid avoidance test.