Partitioning and availability of uranium and nickel in contaminated riparian sediments

The effects of iron oxides and organic matter on the partitioning and chemical lability of U and Ni were examined for contaminated riparian sediments from the U.S. Department of Energy's Savannah River Site. In sequential extractions of four sediments that ranged from 12.7 to 82.2 g kg(-1) in organic carbon, U was found almost exclusively in moderately labile fractions (93% in acid-soluble + organically bound). Nickel was distributed across all operationally defined fractions, including substantial amounts in the very labile fractions (4-15% in water-soluble + exchangeable), noncrystalline and crystalline iron oxides (38-49%), and in the nonlabile residual fraction (25-34%). Aqueous U concentrations in 1:1 sediment-water extracts were highly correlated to dissolved organic carbon (DOC) (R2 = 0.96; p < 0.0001) and ranged from 29 to 410 microg L(-1). Aqueous concentrations of Ni exceeded U by two to three orders of magnitude (124-2227 microg L(-1)) but were not correlated with DOC (R2 = 0.04; p = 0.53). Partitioning and solubility trends suggest that Ni availability is controlled primarily by iron-oxide phases, whereas U availability is dominated by naturally occurring organic carbon. Discrete mineral phases were also identified as nonlabile reservoirs of anthropogenic metals. In spite of comparably high sediment concentrations, Ni appears to be significantly more available than U in riparian sediments and therefore warrants greater consideration in terms of environmental consequences (i.e., transport, biological uptake, and toxicity).     

Pools and Fluxes of Cations,Anions and Doc in Two Forest Soils Treated With Lime and Ash

The effect of liming and ash treatment on pools, fluxes and concentrations of major solutes was investigated at two forestedsites (Norway spruce) in S. Sweden. One site was treated 15 yrprior to sampling (Hasslöv-Hs; dolomite: 3.45 and 8.75 t ha^-1) and the other 4 yr before (Horröd-Hd; dolomite: 3.25 t ha^-1; wood ash: 4.28 t ha^-1). Effects of limingwere most pronounced in the O horizon solutions where higher pH,elevated Ca (120–700 M) and Mg (50–600 M) were observed as compared to control plots. The impact on the mineralsoil was more moderate. Soil solution concentrations were combined with modelled hydrological flow to calculate mass flows,which largely followed the trends of the solution composition. Liming also resulted in large increases of both exchangeable Caand Mg as well as effective cation exchange capacity (CEC_E;2–5 times the controls). The base saturation (BS%) was raised to 60–100% in the O horizon while in the mineral soil elevated values were only seen at the Hs site (20–60%; down to 10–15 cm depth for 8.75 t ha^-1). Ash treatment did notaffect either the soil solution nor the exchangeable pool to thesame extent as lime. In general, the impact at the Hd site was less pronounced especially in the mineral soil, which might be due to shorter treatment time (4 vs. 15 yr) and also differentthickness of the O horizon. Budget calculations for Ca and Mg originating from the lime showed that a major part of the Ca (40–100%) was retained in the top 30 cm of the soil, of which30–95% was present in the O horizon. The mobility of Mg wasgreater and it was estimated that a significant part had been leached from the profile (30 and 50 cm depth) after 15 yr. Increased mass flows of NO₃ ^- due to nitrification resulting from liming at the Hs site were calculated in the range120–350 mmol m^-2 yr^-1 (or 1.2–3.5 kmol ha^-1 yr^-1). There was significant leaching of Al (25–60 mmol m^-2 yr^-1), of which about 70% was inorganic, in thelower B horizon at both sites with no influence of liming.     

Plutonium solubility in sediment pore waters

Using in situ porous cup samplers, dissolved Pu concentrations have been measured over a year in the pore waters from two contrasting sites in the valley of the River Esk, North West England. In saltmarsh sediments, dissolved Pu represents approximately 1 part in 10(6) of the total inventory. The Pu concentration in solution is in the range 1.1-3.5 mBq l-1, varying by a factor of 3 in the course of the year. Most of the changes in dissolved Pu coincide with changes in dissolved Fe and Mn concentrations, with Pu being low in the summer months when Fe and Mn are high. Nevertheless, there are a number of factors which make it unclear as to whether these patterns might be related to seasonal redox changes in the saltmarsh. At the highly organic, reducing reedbed site, the proportion of Pu in solution is typically around 1 part in 10(3), proportionately much higher than in the saltmarsh, giving concentrations ranging between 9.0 and 28.5 mBq l-1, and are apparently maintained by complexation to dissolved organic matter. There is no obvious seasonal pattern at the reedbed site nor is there any relation to any of the dissolved species measured (Fe, Mn, Na, DOC).     

Farm tourism in England's peak national park

Summary The careful integration of tourism/leisure activities with agriculture is proving of increasing economic value to farming communities whilst providing also the means to safeguard and conserve rural environments and landscapes. The recognition of this value is reflected in the number of grants available in Europe to assist and encourage farmers to diversify their farming activities to embrace tourism and leisure. This paper describes a number of schemes which have been promoted in the Peak National Park (UK) to encourage farmers to attempt such diversification. Their value in conserving a valuable and valued landscape is discussed.Haydon Morris was until recently Senior Planner at the Peak National Park, and is currently Development Manager for the Cumbria Tourist Board. He may be contacted at the Board's Offices; Ashleigh, Windermere, LA23 2AQ, UK.Dr Michael Romeril is Conservation Officer for the Island of Jersey. His address is; Planning Office, South Hill, St. Helier, Jersey, G.B.     

Effect of Chlorination on the Gill Lipids of the Mussel Mytilus edulis (L)

Experiments are described which involve the chlorination of standard solutions of lipids and populations of the mussel, Mytilus edulis (L). The object was to test the hypothesis that chlorine will bind to unsaturated lipids. Evidence is presented that chlorine and aqueous chlorinated species rapidly and readily form addition compounds with unsaturated lipids in vivo as well as in vitro. The relevance of these findings to possible environmental effects of chlorination is discussed.     

Daily mortality in the Philadelphia metropolitan area and size-classified particulate matter

Time-series of daily mortality data from May 1992 to September 1995 for various portions of the seven-county Philadelphia, PA, metropolitan area were analyzed in relation to weather and a variety of ambient air quality parameters. The air quality data included measurements of size-classified PM, SO4(2-), and H+ that had been collected by the Harvard School of Public Health, as well as routine air pollution monitoring data. Because the various pollutants of interest were measured at different locations within the metropolitan area, it was necessary to test for spatial sensitivity by comparing results for different combinations of locations. Estimates are presented for single pollutants and for multiple-pollutant models, including gaseous pollutants and mutually exclusive components of PM (PM2.5 and coarse particles, SO4(2-) and non-SO4(2-) portions of total suspended particulate [TSP] and PM10), measured on the day of death and the previous day. We concluded that associations between air quality and mortality were not limited to data collected in the same part of the metropolitan area; that is, mortality for one part may be associated with air quality data from another, not necessarily neighboring, part. Significant associations were found for a wide variety of gaseous and particulate pollutants, especially for peak O3. Using joint regressions on peak O3 with various other pollutants, we found that the combined responses were insensitive to the specific other pollutant selected. We saw no systematic differences according to particle size or chemistry. In general, the associations between daily mortality and air pollution depended on the pollutant or the PM metric, the type of collection filter used, and the location of sampling. Although peak O3 seemed to exhibit the most consistent mortality responses, this finding should be confirmed by analyzing separate seasons and other time periods.     

Energy recovery from solid waste fuels using advanced gasification technology

Since the mid-1980s, TPS Termiska Processer AB has been working on the development of an atmospheric-pressure gasification process. A major aim at the start of this work was the generation of fuel gas from indigenous fuels to Sweden (i.e. biomass). As the economic climate changed and awareness of the damage to the environment caused by the use of fossil fuels in power generation equipment increased, the aim of the development work at TPS was changed to applying the process to heat and power generation from feedstocks such as biomass and solid wastes. Compared with modern waste incineration with heat recovery, the gasification process will permit an increase in electricity output of up to 50%. The gasification process being developed is based on an atmospheric-pressure circulating fluidised bed gasifier coupled to a tar-cracking vessel. The gas produced from this process is then cooled and cleaned in conventional equipment. The energy-rich gas produced is clean enough to be fired in a gas boiler (and, in the longer term, in an engine or gas turbine) without requiring extensive flue gas cleaning, as is normally required in conventional waste incineration plants. Producing clean fuel gas in this manner, which facilitates the use of efficient gas-fired boilers, means that overall plant electrical efficiencies of close to 30% can be achieved. TPS has performed a considerable amount of pilot plant testing on waste fuels in their gasification/gas cleaning pilot plant in Sweden. Two gasifiers of TPS design have been in operation in Grève-in-Chianti, Italy since 1992. This plant processes 200 tonnes of RDF (refuse-derived fuel) per day. It is planned that the complete TPS gasification process (including the complete fuel gas cleaning system) be demonstrated in several gas turbine-based biomass-fuelled power generating plants in different parts of the world. It is the aim of TPS to prove, at commercial scale, the technical feasibility and economic advantages of the gasification process when it is applied to solid waste fuels. This aim shall be achieved, in the short-term, by employing the cold clean product gas in a gas boiler and, in the longer-term, by firing the gas in engines and gas turbines. A study for a 90 MWth waste-fuelled co-generation plant in Sweden has shown that, already today, gasification of solid waste can compete economically with conventional incineration technologies.     

Environmental assessment of green hardboard production coupled with a laccase activated system

European consumption of wood-based panels reached record levels in recent years driven mostly by demand from end-use sectors: residential construction, furniture, cabinets, flooring and mouldings. The main panel types are composite boards such as particleboard, high density fiberboard (HDF), medium-density fiberboard (MDF) and other adhesively bonded composites such as plywood and wet-process fiberboard (hardboard). The synthetic resins used in their manufacture come from non-renewable resources, such as oil and gas. Several consequences are associated to this type of adhesives: variation in the availability and cost of these wood adhesives depends on raw materials, the formaldehyde emissions as well as the limited recyclability of the final product. Hence, in the search for alternatives to petroleum-based wood adhesives, efforts are being devoted to develop adhesives by using phenolic substitutes based on lignin, tannin or starch. In this context, the forest industry is increasingly approaching to enzyme technology in the search of solutions. The main goal of this study was to assess the environmental impacts during the life cycle of a new process for the manufacture of hardboards manufacture, considering the use of a two-component bio-adhesive formulated with a wood-based phenolic material and a phenol-oxidizing enzyme. This new product was compared to the one manufactured with the conventional phenol-formaldehyde resin. The study covers the life cycle of green hardboards production from a cradle-to-gate perspective, analysing in detail the hardboard plant and dividing the process chain in three subsystems: Fibers Preparation, Board Forming and Board Finishing.Auxiliary activities such as chemicals, bio-adhesive, wood chips, thermal energy and electricity production and transport were included within the system boundaries.Global warming (GW), photochemical oxidant formation (PO), acidification (AC) and eutrophication (EP) were the impact categories analysed in this study. Additionally, the cumulative energy demand was evaluated as another impact category. According to the results, four stages significantly influenced the environmental burdens of the production system: laccase production, on-site thermal energy and electricity production as well as wood chipping stage. Due to the environmental impact associated to the production of green bonding agents, a sensitivity analysis with special focus on the eutrophying emissions was carried out by evaluating the amount of laccase and lignin based phenolic material used. The combined reduction in both bonding agents may slightly reduce the contributions to this impact category. In addition, a hypothetical scenario with no laccase and with a higher concentration of the lignin based material (25% more) could improve the environmental profile in all impact categories with a reduction of 1.5% in EP.Further research should focus mainly on laccase production, in order to reduce its energy demand as well as on the amount of green adhesive required to obtain mechanical and swelling properties similar to those of conventional hardboard.     

Performance of sequential anaerobic/aerobic digestion applied to municipal sewage sludge

A promising alternative to conventional single phase processing, the use of sequential anaerobic-aerobic digestion, was extensively investigated on municipal sewage sludge from a full scale wastewater treatment plant. The objective of the work was to evaluate sequential digestion performance by testing the characteristics of the digested sludge in terms of volatile solids (VS), Chemical Oxygen Demand (COD) and nitrogen reduction, biogas production, dewaterability and the content of proteins and polysaccharides. VS removal efficiencies of 32% in the anaerobic phase and 17% in the aerobic one were obtained, and similar COD removal efficiencies (29% anaerobic and 21% aerobic) were also observed. The aerobic stage was also efficient in nitrogen removal providing a decrease of the nitrogen content in the supernatant attributable to nitrification and simultaneous denitrification. Moreover, in the aerobic phase an additional marked removal of proteins and polysaccharides produced in the anaerobic phase was achieved. The sludge dewaterability was evaluated by determining the Optimal Polymer Dose (OPD) and the Capillary Suction Time (CST) and a significant positive effect due to the aerobic stage was observed. Biogas production was close to the upper limit of the range of values reported in the literature in spite of the low anaerobic sludge retention time of 15 days. From a preliminary analysis it was found that the energy demand of the aerobic phase was significantly lower than the recovered energy in the anaerobic phase and the associated additional cost was negligible in comparison to the saving derived from the reduced amount of sludge to be disposed.