Evaluation of catalyzed and electrically heated filters for removal of particulate emissions from diesel-A- and JP-8-fueled engines

In-service diesel engines are a significant source of particulate matter (PM) emissions, and they have been subjected to increasingly strict emissions standards. Consequently, the wide-scale use of some type of particulate filter is expected. This study evaluated the effect of an Engelhard catalyzed soot filter (CSF) and a Rypos electrically heated soot filter on the emissions from in-service diesel engines in terms of PM mass, black carbon concentration, particle-bound polycyclic aromatic hydrocarbon concentration, and size distribution. Both filters capture PM. The CSF relies on the engine's exhaust to reach the catalyst regeneration temperature and oxidize soot, whereas the electrically heated filter contains a heating element to oxidize soot. The filters were installed on several military diesel engines. Particle concentrations and compositions were measured before and after installation of the filter and again after several months of operation. Generally, the CSF removed at least 90% of total PM, and the removal efficiency improved or remained constant after several months of operation. In contrast, the electrical filters removed 44-69% of PM mass. In addition to evaluating the soot filters, the sampling team also compared the results of several real-time particle measurement instruments to traditional filter measurements of total mass.     

Managing Indirect Environmental Impact within Local Authorities' Standardized Environmental Management Systems

Many local authorities use standardized environmental management systems (EMSs) to improve their environmental management. These authorities often find it difficult to manage environmental impact caused by their exercise of authority i.e. indirect environmental impact (IEI) within their EMSs. Since this is connected to their core activities, it is important to understand how IEI could be more efficiently managed with respect to EMS work. The purpose for this paper is to study if and how IEI could be managed within the framework of EMS. In this study we have identified two different approaches to managing IEI. Because managing IEI is complex, it is often ignored when initiating EMSs or managed by explicitly avoid mentioning the concept. Managing IEI is seen as a matter of maturity within the organization. The paper concludes with a discussion regarding a developed definition of IEI and how management of IEI could be facilitated.     

ANALYSIS OF NEW TECHNIQUES FOR PUBLIC INVOLVEMENT IN WATER PLANNING1

ABSTRACT: The growing demands by the public for a more active role in planning have recently generated considerable interest among researchers and planners in the subject of public involvement techniques. Numerous surveys have found that standard public participation techniques (e.g., public hearings) by themselves are considered inadequate. Several techniques that have potential for overcoming some of the limitations of standard public involvement techniques have recently been developed. This paper describes several of these new techniques and analyzes each of them in terms of their potential utility in water resources planning.     

Sequentielle Schwermetallextraktion aus Staubniederschl?gen und Stra?ensedimenten Teil I: Sequentielle Schwermetallextraktion von Mikroproben

Für die Anwendung der sequentiellen Schwermetallextraktion auf Proben, die nur im Milligramm-Bereich erhalten werden k?nnen (Mikroproben, wie z. B. Staubniederschl?ge), wurde die Methode vonZeien &Brümmer (1989) weiterentwickelt. Der Extraktionsma?stab wurde um den Faktor 1∶100 verringert und die Reproduzierbarkeit des Verfahrens mit variablen Probenmengen um 20mg und einem Extraktionsvolumen von 500 μl mit Hilfe von Standardb?den nachgewiesen. M?gliche Einflüsse variabler Extraktionsverh?ltnisse (Verh?ltnis von Probenmenge zu Extraktionsvolumen) sowie eine aufwendige Vorbehandlung von Staubproben, die nach der Bergerhoff-Methode (VDI 2119/2, 1972) gesammelt wurden, lagen bei diesen Untersuchungen weitgehend im Variationsbereich des Verfahrens. Die sequentielle Extraktion kann folglich zur Untersuchung der Mobilisierbarkeit von Schwermetallen auch aus Mikroproben mit variablen Probenmengen eingesetzt werden. Mit Hilfe dieses Verfahrens wurden die Mobilisierbarkeiten von Zink, Kupfer und Blei der Schluff- und Tonfraktion von Stra?ensedimenten mit Staubniederschl?gen an zwei urbanen Standorten mit unterschiedlicher, verkehrsbedingter Schwermetallbelastung verglichen. Diese Untersuchungen werden in Teil 2 (“Sequentielle Schwermetallextraktion von st?dtischen St?uben”) vorgestellt.     

Transaction costs for carbon sequestration projects in the tropical forest sector

There is general consensus that carbon (C) sequestration projects in forests are a relatively low cost option for mitigating climate change, but most studies on the subject have assumed that transaction costs are negligible. The objectives of the study were to examine transaction costs for forest C sequestration projects and to determine the significance of the costs based on economic analyses. Here we examine four case studies of active C sequestration projects being implemented in tropical countries and developed for the C market. The results from the case studies were then used with a dynamic forest and land use economic model to investigate how transaction costs affect the efficiency and cost of forest C projects globally. In the case studies transaction costs ranged from 0.38 to 27 million US dollars ($0.09 to $7.71/t CO₂) or 0.3 to 270 % of anticipated income depending principally on the price of C and project size. The three largest cost categories were insurance (under the voluntary market; 41–89 % of total costs), monitoring (3–42 %) and regulatory approval (8–50 %). The global analysis indicated that most existing estimates of marginal costs of C sequestration are underestimated by up to 30 % because transaction costs were not included.     

Spatial and Temporal Changes of Suspended Matter in Relation to Wind and Vegetation Cover in A Mediterranean Shallow Coastal Environment

Seasonal and spatial changes in seston, (POC), particulate organic carbon, (PON) particulate organic nitrogen and chlorophyll-a concentrations were studied on a monthly basis in a Mediterranean shallow coastal area (Stagnone di Marsala, Western Sicily) in order to gather information on factors controlling particulate organic matter distribution and composition. Seston concentration and composition were connected to the main physicochemical and biological driving factors, such as temperature, salinity, dissolved oxygen, wind-speed and biomass of submerged vegetation. the Stagnone di Marsala is characterized by high temperatures with strong seasonality (range: 11-28°C), while values ranged from 33 to 45 salinity. Total suspended organic matter concentrations (by ignition loss) ranged from 2 mg l^-1 (in summer) to 12mgl^-1 (in winter) and chlorophyll-a concentrations from 0.02 to 2 μgl^-1. Despite a low POC/PON ratios (ranging from 5 to 11), the ratio of POC to chlorophyll (CHL-a) displayed very high values (annual average of 647). the data reported in this study, highlighting the oligotrophy of the Stagnone di Marsala area, indicate that the trophic state of the basin was controlled by different degrees of wind exposure (mean monthly wind velocity at exposed sites ranged between 4.2 and 6.7 m s^-1) and by gradients in vegetation cover. These two factors induced clear changes in the concentration and composition of the suspended particles, but played a different role in exposed and sheltered areas. Exposed areas with limited vegetation were characterized by large resuspension processes and wide temperature and salinity fluctuations caused by wind induced turbulence. in these areas, autotrophic biomass (as chlorophyll-a), due to phytoplankton and/or re-suspended microphytobenthos, appeared to play an important