Household wood heater usage and indoor leakage of BTEX in Launceston,Australia: A null result

A study has been conducted in Launceston, Australia, to determine within households with wood heaters the effect of leakage from the heater and flue on the indoor air concentrations of the pollutants: benzene, toluene, ethylbenzene and xylene (BTEX). The study involved three classes: 28 households without wood heaters, 19 households with wood heaters compliant with the relevant Australian Standard and 30 households with non-compliant wood heaters. Outdoor and indoor BTEX concentrations were measured in each household for 7 days during summer when there was little or no wood heater usage, and for 7 days during winter when there was widespread wood heater usage. Each participant kept a household activity diary throughout their sampling periods. For wintertime, there were no significant differences of the indoor BTEX concentrations between the three classes of households. Also there were no significant relationships between BTEX indoor concentrations within houses and several measures of the amount of wood heater use within these houses. For the households sampled in this study, the use of a wood heater within a house did not lead to BTEX release within that house and had no direct detectable influence on the concentrations of BTEX within the house. We propose that the pressure differences associated with the both the leakiness or permeability of the building envelope and the draught of the wood heater have key roles in determining whether there will be backflow of smoke from the wood heater into the house. For a leaky house with a well maintained wood heater there should be no backflow of smoke from the wood heater into the house. However backflow of smoke may occur in well sealed houses.The study also found that wood heater emissions raise the outdoor concentrations of BTEX in winter in Launceston and through the mixing of outdoor air through the building envelopes into the houses, these emissions contribute to increases in the indoor concentrations of BTEX in winter in all houses in Launceston.     

Responses of herbaceous plants to urban air pollution: Effects on growth, phenology and leaf surface characteristics

Vehicle exhaust emissions are a dominant feature of urban environments and are widely believed to have detrimental effects on plants. The effects of diesel exhaust emissions on 12 herbaceous species were studied with respect to growth, flower development, leaf senescence and leaf surface wax characteristics. A diesel generator was used to produce concentrations of nitrogen oxides (NO_x) representative of urban conditions, in solardome chambers. Annual mean NO_x concentrations ranged from 77 nl l^−l to 98 nl l⁻¹, with NO:NO₂ ratios of 1.4-2.2, providing a good experimental simulation of polluted roadside environments. Pollutant exposure resulted in species-specific changes in growth and phenology, with a consistent trend for accelerated senescence and delayed flowering. Leaf surface characteristics were also affected; contact angle measurements indicated changes in surface wax structure following pollutant exposure. The study demonstrated clearly the potential for realistic levels of vehicle exhaust pollution to have direct adverse effects on urban vegetation.     

Occurrence and sources of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls in surficial sediments of Lakes Superior and Huron

Concentrations and congener profile patterns of 2378-substituted PCDD/Fs and DLPCBs in offshore, nearshore and tributary sediments of Lakes Superior and Huron are reported, and spatial trends and source contributions assessed. PCDD/F concentrations ranged from 5 to 18 000 pg/g dw (Lake Superior) and 3 to 6100 pg/g dw (Lake Huron); DLPCBs ranged from 9 to 11 000 pg/g dw (Lake Superior) and 9 to 27 000 pg/g dw (Lake Huron). Our analysis indicated atmospheric deposition is a primary source to depositional areas of both lakes; however, greater PCDD/F and DLPCB concentrations were observed at several nearshore and tributary sites, and were attributed to corresponding land use in the watershed. Statistical analysis and pattern comparison suggested that industrial inputs mainly associated with wood treatment plants, pulp and paper mills, mining operations, and chlorine-based chemical manufacturing also contributed to contamination by PCDD/Fs and DLPCBs in certain nearshore and offshore areas of Lakes Superior and Huron.     

Trace contamination with dioxin-like chemicals: evaluation of bioassay-based TEQ determination for hazard assessment and regulatory responses

Many recent dioxin contamination events have been traced back to poisoned animal feed or feed ingredients. Therefore, enforcement authorities placed limits on the levels of dioxins in food and feed or implemented strict monitoring and control programs. The levels in force are generally expressed as TEQ values, which inherently accepts the underlying hypothesis that the effects of dioxin-like chemicals are additive. TEQ determination involves either chemo-analysis, with high-resolution gas chromatography in combination with high-resolution mass spectroscopy, or bio-analysis. Bio-analytical methods, more particularly the reporter gene expression method CALUX, are advantageous due to their high throughput rate and low cost. Moreover, the CALUX methodology detects the overall dioxin-like toxicity, rather than the limited number of compounds investigated by chemo-analysis. Bioanalytical methods such as CALUX also differ from chemo-analysis in that the contribution of antagonistic as well as synergistic effects, which violate the additivity principle, can be detected. The application of bio-analytical methods can facilitate a broader assessment of public health risks by intensifying the current monitoring programs in terms of both sample numbers and types. Bio-analysis provides information on the total dioxin-like activity of the samples under study (hazard assessment); however, chemo-analysis is still needed to identify the predominant contaminants (congener identification) for risk management.     

Motivations underpinning honeybee management practices: A Q methodology study with UK beekeepers

Beekeepers are central to pollinator health. For policymakers and beekeeping organisations to develop widely accepted strategies to sustain honeybee populations alongside wild pollinators, a structured understanding of beekeeper motivations is essential. UK beekeepers are increasing in number, with diverse management styles despite calls for coordinated practice to manage honeybee health. Our Q methodology study in Cornwall, UK, indicated five beekeeping perspectives; conventional hobbyists, natural beekeepers, black bee farmers, new-conventional hobbyists and pragmatic bee farmers. Motivations can be shared across perspectives but trade-offs (notably between economic, social responsibility and ideological motivations) result in differing practices, some of which counter ‘official’ UK advice and may have implications for pollinator health and competition. Honeybee conservation emerged as a key motivator behind non-conventional practices, but wild pollinator conservation was not prioritised by most beekeepers in practice. Q methodology has the potential to facilitate non-hierarchical collaboration and conceptualisation of sustainable beekeeping, moving towards co-production of knowledge to influence policy.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-022-01736-w.     

Measurements show that marginal wells are a disproportionate source of methane relative to production

ABSTRACT

Oil and natural gas wells are a prominent source of the greenhouse gas methane (CH₄), but most measurements are from newer, high producing wells. There are nearly 700,000 marginal “stripper” wells in the US, which produce less than 15 barrels of oil equivalent (BOE) d^?1. We made direct measurements of CH₄ and volatile organic carbon (VOC) emissions from marginal oil and gas wells in the Appalachian Basin of southeastern Ohio, all producing < 1 BOE d^?1. Methane and VOC emissions followed a skewed distribution, with many wells having zero or low emissions and a few wells responsible for the majority of emissions. The average CH₄ emission rate from marginal wells was 128 g h^?1 (median: 18 g h^?1; range: 0– 907 g h^?1). Follow-up measurements at five wells indicated high emissions were not episodic. Some wells were emitting all or more of the reported gas produced at each well, or venting gas from wells with no reported gas production. Measurements were made from wellheads only, not tanks, so our estimates may be conservative. Stochastic processes such as maintenance may be the main driver of emissions. Marginal wells are a disproportionate source of CH₄ and VOCs relative to oil and gas production. We estimate that oil and gas wells in this lowest production category emit approximately 11% of total annual CH₄ from oil and gas production in the EPA greenhouse gas inventory, although they produce about 0.2% of oil and 0.4% of gas in the US per year.

Implications: Low producing marginal wells are the most abundant type of oil and gas well in the United States, and a surprising number of them are venting all or more of their reported produced gas to the atmosphere. This makes marginal wells a disproportionate greenhouse gas emissions source compared to their energy return, and a good target for environmental mitigation.     

Status and trends of terrestrial arthropod abundance and diversity in the North Atlantic region of the Arctic

Ambio - The Circumpolar Biodiversity Monitoring Programme (CBMP) provides an opportunity to improve our knowledge of Arctic arthropod diversity, but initial baseline studies are required to...     

Entrepreneurial activities in policy implementation: Sweden’s national wind coordinators

Regional Environmental Change - A growing body of literature focuses on how the context in which policy entrepreneurs operate shapes their actions. This study contributes to this perspective by...     

Synthesis,Characterization and NH<Subscript>3</Subscript>/N<Subscript>2</Subscript> Gas Permeation Study of Nanocomposite Membranes

Carbon nanotubes have exceptional mechanical properties which make them very attractive for the development of composite membranes. In this research, NH₃/N₂ gas permeation behavior of flat sheet composite membranes was examined. The cellulose acetate-multiwalled carbon nanotubes composite membranes were synthesized using solution casting method. The morphology and dispersion of carbon nanotubes were observed through SEM. However, the composite membranes were also characterized using several analytical techniques such as X-ray diffraction analysis, tensile testing analysis, and thermal gravimetric analysis. Characterization of these membranes depicted that carboxylic group functionalized MWCNTs are extremely compatible with CA. The permeation experiments were performed with NH₃ and N₂ to explore the host–guest interaction of MWCNTs with chosen gases. The permeability of NH₃ was found pronounced compared to N₂. The NH₃/N₂ selectivity up to 90 was documented.     

The dilemma of pest suppression in the conservation of endangered species

In the conservation of endangered species, suppression of a population of one native species to benefit another poses challenges. Examples include predator control and nest parasite reduction. Less obvious is the control of blood-feeding arthropods. We conducted a case study of the effect of native black flies (Simulium spp.) on reintroduced Whooping Cranes (Grus americana). Our intent was to provide a science-driven approach for determining the effects of blood-feeding arthropods on endangered vertebrates and identifying optimal management actions for managers faced with competing objectives. A multiyear experiment demonstrated that black flies reduce nest success in cranes by driving incubating birds off their nests. We used a decision-analytic approach to develop creative management alternatives and evaluate trade-offs among competing objectives. We identified 4 management objectives: establish a self-sustaining crane population, improve crane well-being, maintain native black flies as functional components of the ecosystem, and minimize costs. We next identified potential management alternatives: do nothing, suppress black flies, force crane renesting to occur after the activity period of black flies, relocate releases of cranes, suppress black flies and relocate releases, or force crane renesting and relocate releases. We then developed predictions on constructed scales of 0 (worst-performing alternative) to 1 (best-performing alternative) to indicate how alternative actions performed in terms of management objectives. The optimal action depended on the relative importance of each objective to a decision maker. Only relocating releases was a dominated alternative, indicating that it was not optimal regardless of the relative importance of objectives. A rational decision maker could choose any other management alternative we considered. Recognizing that decisions involve trade-offs that must be weighed by decision makers is crucial to identifying alternatives that best balance multiple management objectives. Given uncertainty about the population dynamics of blood-feeding arthropods, an adaptive management approach could offer substantial benefits.