Investigation of hydrogen generation from municipal solid waste incineration fly ash

Hydrogen generation from municipal solid waste incineration fly ash was investigated to understand the influences of contacting method, kinds of contact solution, liquid to solid ratio, and particle size distribution of materials. Redox properties of materials and hydrogen generation were also studied. The largest quantity of gas generated in contact with water was 29.1 ml/g-ash, most of which was hydrogen. Fluidized bed fly ash generated more gas than stoker fly ash. In order to calculate the hydrogen generation potential (the maximum quantity of gas generated in contact with water), a novel system using a Y-shaped test tube and NaOH was utilized. This method gives values which are related to the quantity of generated gas in contact with water. A relationship between the aluminum content and hydrogen generation potential was observed, especially for fluidized bed fly ash. The reducing potential of fluidized bed fly ash was higher than that of stoker fly ash. Only fluidized bed fly ash showed a positive correlation between aluminum content and reducing potential, and between reducing potential and hydrogen generation potential. These results suggest that fluidized bed fly ash contains more Al⁰ than stoker fly ash. Received: September 11, 1998 / Accepted: March 19, 1999     

Half-lives of serum PCB congener concentrations in environmentally exposed early adolescents

The aim was to determine half-life of six most abundant PCB congeners in the body of early adolescents. In 304 environmentally exposed children, PCB serum concentration was determined at the age of 8 and 12 years. Half-life was determined for each child assuming exponential decrease or for the whole cohort using multiple regression. Results obtained by both approaches were in agreement. PCB reuptakes corrupting half-life estimates for each child and each congener were evaluated. If one of the serum PCB concentration values fell below the level of detection (LOD) the pair was excluded and if PCB half-life value exceeded the arbitrary value of 30 years. The following median half-lives in years 4.46, 10.59, 9.7, 4.7, 9.1 and 9.8 were obtained for PCB congeners 118, 138⁺¹⁶³, 153, 156⁺¹⁷¹, 170 and 180, respectively. The elimination half-life values were not systematically related to PCB serum concentration at any examination age. Between half-life values, percentage of children with significant reuptakes and PCB congener abundance in serum were found significant associations.     

Comparative study of microbial dechlorination of chlorinated ethenes in an aquifer and a clayey aquitard

In order to determine whether natural attenuation of chlorinated ethenes by microbial activity occurs in aquitards, sediments at a site contaminated with tetrachloroethene were vertically studied by drilling. The distribution of microbes (Dehalococcoides group and anaerobic hydrogen producers) and the ability of the sediments to sustain microbial dechlorination were determined in an aquitard as well as in an aquifer. Close-spaced sampling revealed the existence of large populations of Dehalococcoides and H(2)-producing bacteria, especially in the organic-rich clayey aquitard rather than in the aquifer. The vinyl chloride reductase gene was also detected in the clay layer. Furthermore, incubation experiments indicated that the clay sediment could sustain transformations of tetrachloroethene at least to vinyl chloride. In contrast, no significant transformation was observed in the aquifer sand. Our results indicate that dechlorination of tetrachloroethene by bacteria can take place in an organic-rich clayey aquitard, and that organic-rich clay may also be important in the natural attenuation in an adjacent aquifer, possibly supplying a carbon source or an electron donor.     

How to select the best tree planting locations to enhance air pollution removal in the MillionTreesNYC initiative

Highest priority zones for tree planting within New York City were selected by using a planting priority index developed combining three main indicators: pollution concentration, population density and low canopy cover. This new tree population was projected through time to estimate potential air quality and carbon benefits. Those trees will likely remove more than 10 000 tons of air pollutants and a maximum of 1500 tons of carbon over the next 100 years given a 4% annual mortality rate. Cumulative carbon storage will be reduced through time as carbon loss through tree mortality outweighs carbon accumulation through tree growth. Model projections are strongly affected by mortality rate whose uncertainties limit estimations accuracy. Increasing mortality rate from 4 to 8% per year produce a significant decrease in the total pollution removal over a 100 year period from 11 000 tons to 3000 tons.     

Recovery of polypropylene and polyethylene from packaging plastic wastes without contamination of chlorinated plastic films by the combination process of wet gravity separation and ozonation

Wet gravity separation technique has been regularly practiced to separate the polypropylene (PP) and polyethylene (PE) (light plastic films) from chlorinated plastic films (CP films) (heavy plastic films). The CP films including poly vinyl chloride (PVC) and poly vinylidene chloride (PVDC) would float in water even though its density is more than 1.0 g/cm³. This is because films are twisted in which air is sometimes entrapped inside the twisted CP films in real existing recycling plant. The present research improves the current process in separating the PP and PE from plastic packaging waste (PPW), by reducing entrapped air and by increasing the hydrophilicity of the CP films surface with ozonation. The present research also measures the hydrophilicity of the CP films.In ozonation process mixing of artificial films up to 10 min reduces the contact angle from 78° to 62°, and also increases the hydrophilicity of CP films. The previous studies also performed show that the artificial PVDC films easily settle down by the same. The effect of ozonation after the wet gravity separation on light PPW films obtained from an actual PPW recycling plant was also evaluated. Although actual light PPW films contained 1.3% of CP films however in present case all the CP films were removed from the PPW films as a settled fraction in the combination process of ozonation and wet gravity separation. The combination process of ozonation and wet gravity separation is the more beneficial process in recovering of high purity PP and PE films from the PPW films.     

Evaluation of countermeasures for red light running by traffic simulator–based surrogate safety measures

Objective: The conflicts among motorists entering a signalized intersection with the red light indication have become a national safety issue. Because of its sensitivity, efforts have been made to investigate the possible causes and effectiveness of countermeasures using comparison sites and/or before-and-after studies. Nevertheless, these approaches are ineffective when comparison sites cannot be found, or crash data sets are not readily available or not reliable for statistical analysis. Considering the random nature of red light running (RLR) crashes, an inventive approach regardless of data availability is necessary to evaluate the effectiveness of each countermeasure face to face.

Method: The aims of this research are to (1) review erstwhile literature related to red light running and traffic safety models; (2) propose a practical methodology for evaluation of RLR countermeasures with a microscopic traffic simulation model and surrogate safety assessment model (SSAM); (3) apply the proposed methodology to actual signalized intersection in Virginia, with the most prevalent scenarios—increasing the yellow signal interval duration, installing an advance warning sign, and an RLR camera; and (4) analyze the relative effectiveness by RLR frequency and the number of conflicts (rear-end and crossing).

Results: All scenarios show a reduction in RLR frequency (?7.8, ?45.5, and ?52.4%, respectively), but only increasing the yellow signal interval duration results in a reduced total number of conflicts (?11.3%; a surrogate safety measure of possible RLR-related crashes). An RLR camera makes the greatest reduction (?60.9%) in crossing conflicts (a surrogate safety measure of possible angle crashes), whereas increasing the yellow signal interval duration results in only a 12.8% reduction of rear-end conflicts (a surrogate safety measure of possible rear-end crash).

Conclusions: Although increasing the yellow signal interval duration is advantageous because this reduces the total conflicts (a possibility of total RLR-related crashes), each countermeasure shows different effects by RLR-related conflict types that can be referred to when making a decision. Given that each intersection has different RLR crash issues, evaluated countermeasures are directly applicable to enhance the cost and time effectiveness, according to the situation of the target intersection. In addition, the proposed methodology is replicable at any site that has a dearth of crash data and/or comparison sites in order to test any other countermeasures (both engineering and enforcement countermeasures) for RLR crashes.     

Night-sky brightness monitoring in Hong Kong

Results of the first comprehensive light pollution survey in Hong Kong are presented. The night-sky brightness was measured and monitored around the city using a portable light-sensing device called the Sky Quality Meter over a 15-month period beginning in March 2008. A total of 1,957 data sets were taken at 199 distinct locations, including urban and rural sites covering all 18 Administrative Districts of Hong Kong. The survey shows that the environmental light pollution problem in Hong Kong is severe—the urban night skies (sky brightness at 15.0 mag arcsec^− 2) are on average ~ 100 times brighter than at the darkest rural sites (20.1 mag arcsec^− 2), indicating that the high lighting densities in the densely populated residential and commercial areas lead to light pollution. In the worst polluted urban location studied, the night-sky at 13.2 mag arcsec^− 2 can be over 500 times brighter than the darkest sites in Hong Kong. The observed night-sky brightness is found to be affected by human factors such as land utilization and population density of the observation sites, together with meteorological and/or environmental factors. Moreover, earlier night skies (at 9:30 p.m. local time) are generally brighter than later time (at 11:30 p.m.), which can be attributed to some public and commercial lightings being turned off later at night. On the other hand, no concrete relationship between the observed sky brightness and air pollutant concentrations could be established with the limited survey sampling. Results from this survey will serve as an important database for the public to assess whether new rules and regulations are necessary to control the use of outdoor lightings in Hong Kong.     

Evaluating coal tar-water partitioning coefficient estimation methods and solute-solvent molecular interactions in tar phase

Equilibrium partitioning coefficients between an industrial coal tar sample and water (K(CT/w)) were determined for 41 polar and nonpolar solutes in batch systems. Together with literature values, 69 K(CT/w) data were analyzed using the following model approaches: Raoult's law, the single parameter linear free energy relationship (SPLFER) with octanol-water partitioning coefficients (K(ow)), the linear solvation energy relationships (LSERs), SPARC and COSMOtherm. Estimations by Raoult's law and the SPLFER agreed well with the experimental log K(CT/w) values for the investigated coal tar, with root mean square errors (RMSE) of 0.31 and 0.33, respectively. LSER resulted in as good estimations (RMSE=0.29) as the previous two. The LSER analysis revealed significant hydrogen (H)-bond acceptor properties of the studied coal tar phase. Using naphthalene as a surrogate solvent for the coal tar phase, SPARC and COSMOtherm provided fairly good predictions (RMSE of 0.63 and 0.65, respectively) of log K(CT/w), without any additional empirical parameter. Further calculations using SPARC and COSMOtherm for partitioning between water and other tar-components (e.g., benzofuran, phenol and quinoline) suggested that minor components in coal tar do not significantly influence K(CT/w) of nonpolar solutes, and that Raoult's law and the SPLFER thus may be generally applied to these types of solutes, e.g., polycyclic aromatic hydrocarbons and alkylbenzenes, regardless of coal tar compositions. In contrast, partitioning of H-bonding solutes (e.g., phenols) can significantly vary depending on the amount of polar tar-components such as N-heterocyclic aromatic compounds. Therefore, the presented successful applications of Raoult's law and SPLFER to the studied coal tar could be a special case, and these simple approaches may not provide reasonable estimations for partitioning of H-bonding solutes from compositionally different coal tars.     

Synthesis of calcium phosphate hydrogel from waste incineration fly ash and its application to fuel cell

Waste incineration fly ash was successfully recycled to calcium phosphate hydrogel, a type of fast proton conductor. The crystallized hydrogel from incineration fly ash had a lower electric conductivity and a lower crystallinity than that from calcium carbonate reagent. However, the difference in electric conductivity between these crystallized hydrogels decreases with temperature. This was due to the presence of potassium in the incineration fly ash. The fuel cell with a membrane electrode assembly (MEA) using the calcium phosphate hydrogel membrane prepared from incineration fly ash was observed to generate electricity. The performance of this fuel cell was almost equal to that of a mixture of K₂CO₃ and CaCO₃ reagents; further, the performance of the former was superior to the fuel cell with a perfluorosulfonic polymer membrane at temperatures greater than approximately 85 °C.