Sources and distribution of hexabromocyclododecanes (HBCDs) in Japanese river sediment

The distribution of hexabromocyclododecane (HBCD) in the sediment of three Japanese rivers with different characteristics (i.e., population and potential source in the catchment) was investigated and compared with the results estimated using a multimedia fate model (ChemCAN). High concentrations of HBCD in sediments in the range of 134-2060 ng g(-1) were found in a river receiving textile wastewater. This contrasted with the much lower concentrations (0.8-4.8 ng g(-1)) observed for an urban river (with a surrounding population of 1.8 million). The medians of observed HBCD concentrations in each river were close to those estimated based on the assumed input source (e.g., 1810 ng g(-1) for the observed median concentration, and 1436 ng g(-1) for the estimation, in the Kuzuryu River). These results demonstrated the importance of considering source contributions of HBCD, including both industrial and consumer sources, to aquatic environments, for reliable risk management.     

Removal of thiobencarb in aqueous solution by zero valent iron

A cost-effective method with zero valent iron (ZVI) powder was developed for the purification of thiobencarb (TB)-contaminated water. The removal treatment was performed in the batch system. A sample solution of 10 ml containing 10 microg ml(-1) of TB could be almost completely treated by 100mg of ZVI at 25 degrees C for 12h of treatment time. Since the formation of chloride ion in the aqueous solution during the treatment of TB was observed, the removal of TB with ZVI may contain two processes: reduction (degradation) and adsorption. Because the present treatment for TB is simple, easy handling and cheap, the developed technology with ZVI can contribute to the treatment of agricultural wastewaters.     

Separation and characterization of the colored material from sugarcane molasses

The colored material (X) was effectively separated from sugarcane molasses using reversed-phase chromatography. Characterization of the molecular structure of sample X was performed using infrared absorption (IR) spectrometry, mass spectrometry (MS), and dynamic light scattering (DLS). The IR spectrum was similar to that of commercial humic acid, and the MS analysis showed that the sample possessed relatively small heterogeneous molecules with molecular masses around 234, 446, 657, 868, and 1079 Da. On the other hand, X sample showed an inhibitory activity toward the cysteine proteinase papain. Furthermore, the inhibitory (G-1) and weak inhibitory (G-2) fractions were separated from sample X using gel permeation chromatography. Samples G-1 and G-2 inhibited papain partial-noncompetitively and had the inhibition constants of 5.01 x 10(-5) and 1.08 x 10(-3)M, respectively. Interestingly, in the DLS experiment, the Stokes radius of sample G-1 was approximately 2 nm, about twice one of sample G-2.     

A preliminary risk assessment of trace elements accumulated in fish to the Indo-Pacific Humpback dolphin (Sousa chinensis) in the northwestern waters of Hong Kong

In order to assess the potential risks associated with consumption of contaminated prey items to the Indo-Pacific Humpback dolphin (Sousa chinensis), fish species (Collichthys lucida, Pseudosciaena crocea, Johnius sp., Thryssa sp., Mugil sp. and Trichiurus sp.) representing the main food items of the dolphin were collected from the northwestern waters of Hong Kong, including the Sha Chau and Lung Kwu Chau Marine Park, which form the main habitat of the dolphin in Hong Kong. Within these waters, there are several potential sources of pollution including significant inputs from the Pearl River catchment, several major sewage outfalls and a series of mud pits that receive contaminated dredged sediments. Concentrations of thirteen trace elements (Ag, As, Cd, Co, Cr, Cs, Cu, Hg, Mn, Ni, Se, V, and Zn) in the fish tissue were analyzed by inductively coupled plasma mass spectrometer (ICP-MS). An assessment of the risks of adverse effects on the dolphin due to consumption of tainted fish was undertaken using two toxic reference benchmarks, namely the reference dose (RfD) and toxicity reference value (TRV). The risk quotient (RQ) calculated for each element showed that the risks from consumption of fish were generally low and within safe limits. The risks associated with arsenic, cadmium and mercury were, however, elevated. The highest calculated RQ was associated with total arsenic; however, the majority of arsenic in marine organisms tends to be in the non-toxic organic form, and the actual risk to the dolphin due to this metalloid is likely to be lower.     

Nitrous oxide flux from landfill leachate-sawdust nitrogenous compost

Composted nitrogenous waste has the potential to produce excessive amounts of nitrous oxide (N2O), a potent greenhouse gas that also contributes to stratospheric ozone depletion. In this laboratory study, sawdust was irrigated with varying amounts of landfill leachate with high NH4+-N content (3950 mg l(-1)). Physicochemical properties, including the amount of N2O produced, were monitored during the composting process over 28 days. A rapid decline in NH4+-N in the first 4 days and increasing NO3--N for 11 days was followed by lower but stabilized levels of available-N, even with repeated leachate irrigation. Less than 0.03% of the leachate-applied N was lost as N2O. Higher leachate applications as much as tripled N2O production, but this represented a lesser proportion overall of the total nitrogen. Addition of glucose to the composting process had no significant effect on N2O production. The derived sawdust-leachate compost supported healthy growth of Sesbania rostrata. It is concluded that compost can be produced from sawdust irrigated with landfill leachate without substantial emission of N2O, although excessive flux of N2O remains about high application rates over longer time periods.     

Modeling Free-Surface Fluctuation Effects for Calculation of Turbulent Open-Channel Flows

A new method of introducing the free-surface effects in the calculation of turbulent open-channel flows using the amplitude of the free-surface fluctuation is proposed along with a modeling method of the equation for the free-surface fluctuation. It can be incorporated in two-equation models like k-or k-type models by introducing the damping factor to represent the interaction of the eddies with the fluctuating free-surface. Test calculations for fully developed flows and those over backward-facing step indicate good agreement with direct numerical simulation results as well as experimental results.     

Non-sterile simultaneous saccharification and fermentation of corn leaves and stalks to <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid without external nutrient addition

Fermentation of lignocellulosic biomass requires auxiliary materials, including nutrients, to ensure the proliferation of microorganisms. Nutrients are usually inexpensive, but their contribution to the cost is considerable because of the very low prices of fermentation products, such as bio-ethanol. Using substances present in native lignocellulosic biomass as nutrients for fermentation was proposed and demonstrated. Leaves and stalks of corn plants were used as biomass, and nutrients were recovered as a nutrient solution by soaking them in water before alkaline peroxide pretreatment. Pretreated biomass and the nutrient solution derived from the same lot were used for non-sterile simultaneous enzymatic saccharification and thermophilic l-lactic acid fermentation (SSF). Using the nutrient solution in the saccharification step did not impact sugar recovery, and instead improved sugar yields because of the presence of eluted sugars in the solution. The l-lactic acid yield of 0.33 g g^?1 based on native biomass weight indicated that the nutrient solution functioned as a source of nutrients and sugars, especially as a source of essential phosphorus. Comparatively, autoclaved SSF yielded less or no l-lactic acid, indicating an apparent inhibitive effect derived from the nutrient solution on bacterial growth.     

Evaluating the cost of flood damage based on changes in extreme rainfall in Japan

We estimated the cost of flood damage using numerical simulations based on digital map data and the flood control economy investigation manual submitted by the Ministry of Land, Infrastructure, Transportation, and Tourism in Japan. The simulation was carried out using a flood model incorporating representative precipitation data for all of Japan. The economic predictions, which estimate flood damage caused by extreme rainfall for the return periods of 5, 10, 30 50, and 100 years, are as follows: (1) the cost of flood damage increases nearly linearly with increases in extreme precipitation; (2) assuming that flood protection is completed for a 50-year return period of extreme rainfall, the benefit of flood protection for a 100-year return period of rainfall is estimated to be 210 billion USD; (3) the average annual expected damage cost for flooding is predicted to be approximately 10 billion USD per year, based on the probability of precipitation for a return period of 100 years and assuming that flood control infrastructures will be completed within the 50-year return period and will be able to protect from flooding with a 50-year return period; (4) urban and rural areas are predicted to suffer high and low costs of damage, respectively. These findings will help to derive measures to enhance flood protection resulting from climate change.     

Feasibility study of the separation of chlorinated films from plastic packaging wastes

This study describes the possible separation of chlorinated plastic films (PVC and PVDC) from other heavy plastic packaging waste (PPW) by selective twist formation and gravity separation. Twists formation was mechanically induced in chlorinated plastic films, whereas twist formation did not occur in PS and PET films. After twist formation, all the films had the apparent density of less than 1.0 g/cm³ and floated in water even though the true density was more than 1.0 g/cm³. However, the apparent density of the PS and the PET films increased with agitation to more than 1.0 g/cm³, whereas that of chlorinated plastic films was kept less than 1.0 g/cm³. The main reason would be the air being held inside the chlorinated plastic films which was difficult to be removed by agitation. Simple gravity separation after twist formation was applied for artificial film with 10 wt.% of the chlorinated films and real PPW films with 9 wt.% of the chlorinated films. About 76 wt.% of the artificial PPW films and 75 wt.% of real PPW films after the removal of PP and PE were recovered as settling fraction with 4.7 wt.% and 3.0 wt.% of chlorinated plastic films, respectively. These results indicate that simple gravity separation process after twist formation can be used to reduce the chlorinated plastic concentration from mixed heavy PPW films.