Spatial variability of ammonium and nitrate in soils near a poultry farm

This paper assesses the distribution of ammonium (NH4+) and nitrate (NO3-) nitrogen deposition in native bushland soil adjacent to an open ventilated poultry farm. The farm is located in Thirlmere 150 km south west of Sydney, Australia. A total of 104 geographically referenced soil cores were obtained from the study area. Soil pH, electrical conductivity (EC), NH4(+) - and NO3(-)-nitrogen concentrations were analysed for variable trends at three depths, i.e. 0-30, 30-60, and 60-90 cm. Significantly higher concentrations of the two nitrogen forms and EC were observed nearer to the farm in the surface soil samples (0-30 cm). The distribution of NH4+, NO3- and EC were all correlated in surface samples throughout the study area. There was no indication of NH4+ and NO3- leaching within soil profile sampled and it appears that weeds and native vegetation had utilised the accumulated nitrogen. The level of N deposition adjacent to the poultry farm decreased downwind due to dispersion of plume and to the buffering effects from the bushland.     

Physico-chemical characteristics and pollution level of Lake Nainital (U.P., India): role of macrophytes and phytoplankton in biomonitoring and phytoremediation of toxic metal ions

Lake Nainital is the sole source of drinking water for the local people and even to majority of tourists. In background of lake utility and its importance at national level, such study is essential which is focused on toxic metal pollution and current nutrient status of the lake and their magnification by algae and macrophytes. Study has shown that lake water is rich in nutrients which supports growth of many aquatic macrophytes and algal blooms. Besides, water is contaminated with metals like Cr, Cu, Fe, Mn, Ni, Pb and Zn. Concentration of some of them like Fe, Pb and Ni were higher than the recommended maximum permissible limits. Concentration of these metals were also found high in lake sediments. The level of metals amongst various components of lake varied considerably in different season. Plants and algae growing therein accumulated appreciable amount of metals and water roots of Salix being more efficient than others. High metal removing potential of these plants may be significant for biomonitoring studies and could be a useful phytoremediation technology to restore water quality by harvesting submerged and floating biomass inhabiting littoral zone of the lake.     

Development and preliminary evaluation of a particulate matter emission factor model for European motor vehicles

Although modeling of gaseous emissions from motor vehicles is now quite advanced, prediction of particulate emissions is still at an unsophisticated stage. Emission factors for gasoline vehicles are not reliably available, since gasoline vehicles are not included in the European Union (EU) emission test procedure. Regarding diesel vehicles, emission factors are available for different driving cycles but give little information about change of emissions with speed or engine load. We have developed size-specific speed-dependent emission factors for gasoline and diesel vehicles. Other vehicle-generated emission factors are also considered and the empirical equation for re-entrained road dust is modified to include humidity effects. A methodology is proposed to calculate modal (accelerating, cruising, or idling) emission factors. The emission factors cover particle size ranges up to 10 microns, either from published data or from user-defined size distributions. A particulate matter emission factor model (PMFAC), which incorporates virtually all the available information on particulate emissions for European motor vehicles, has been developed. PMFAC calculates the emission factors for five particle size ranges [i.e., total suspended particulates (TSP), PM10, PM5, PM2.5, and PM1] from both vehicle exhaust and nonexhaust emissions, such as tire wear, brake wear, and re-entrained road dust. The model can be used for an unlimited number of roads and lanes, and to calculate emission factors near an intersection in user-defined elements of the lane. PMFAC can be used for a variety of fleet structures. Hot emission factors at the user-defined speed can be calculated for individual vehicles, along with relative cold-to-hot emission factors. The model accounts for the proportions of distance driven with cold engines as a function of ambient temperature and road type (i.e., urban, rural, or motorway). A preliminary evaluation of PMFAC with an available dispersion model to predict the airborne concentration in the urban environment is presented. The trial was on the A6 trunk road where it passes through Loughborough, a medium-size town in the English East Midlands. This evaluation for TSP and PM10 was carried out for a range of traffic fleet compositions, speeds, and meteorological conditions. Given the limited basis of the evaluation, encouraging agreement was shown between predicted and measured concentrations.     

Associations between particle number and gaseous co-pollutant concentrations in the Los Angeles Basin

Continuous measurements of particle number (PN), particle mass (PM10), and gaseous pollutants [carbon monoxide (CO), nitric oxide (NO), oxides of nitrogen (NOx), and ozone (O3)] were performed at five urban sites in the Los Angeles Basin to support the University of Southern California Children's Health Study in 2002. The degree of correlation between hourly PN and concentrations of CO, NO, and nitrogen dioxide (NO2) at each site over the entire year was generally low to moderate (r values in the range of 0.1-0.5), with a few notable exceptions. In general, associations between PN and O3 were either negative or insignificant. Similar analyses of seasonal data resulted in levels of correlation with large variation, ranging from 0.0 to 0.94 depending on site and season. Summertime data showed a generally higher correlation between the 24-hr average PN concentrations and CO, NO, and NO2 than corresponding hourly concentrations. Hourly correlations between PN and both CO and NO were strengthened during morning rush-hour periods, indicating a common vehicular source. Comparing hourly particle number concentrations between sites also showed low to moderate spatial correlations, with most correlation coefficients below 0.4. Given the low to moderate associations found in this study, gaseous co-pollutants should not be used as surrogates to assess human exposure to airborne particle number concentrations.     

Alteration in some biochemical and enzymological parameters in the snake head fish , exposed chronically to quinalphos

The effect of chronic quinalphos exposure (0.025 mg/1) for 15 and 30 days on the levels of glucose, lactic acid and haemoglobin in the blood; glycogen and lactic acid contents of the liver and muscles; and the activities of hexokinase, lactate dehydrogenase, pyruvate dehydrogenase and succinate dehydrogenase in liver, kidney, intestine, brain, gills and muscles was examined. Blood glucose, lactic acid and haemoglobin levels decreased in quinalphos exposed fish. Glycogen content of liver and muscles increased but lactic acid decreased. Hexokinase was inhibited in intestine and muscles after 30 days of exposure but increase in enzyme activity was noted in gills. Lactate dehydrogenase activity was inhibited in all the six tissues. Pyruvate dehydrogenase activity of liver, kidney, gills and muscles was inhibited. However, in brain the enzyme activity was elevated. Succinate dehydrogenase activity was elevated in intestine and inhibited in other tissues.     

Comparison of a Subjective and a Physical Approach for Identification of Priority Areas for Soil and Water Management in a Watershed – A Case Study of Nagwan Watershed in Hazaribagh District of Jharkhand, India

The present investigation was an attempt to compare the within-watershed prioritization capabilities of a physical model based SDSS with the SYI and RPI model based subjective-SDSS, conventionally devised for between-watershed prioritizations, by All India Soil Survey and Land Use Planning Division of Ministry of Agriculture, Government of India. Application of these two approaches on a test watershed situated in Damodar-Barakar catchment in India, the second most seriously eroded area in the world, demonstrated that the proposed physical model based SDSS was capable of realistically and logically mimicking the sub-watershed-scaled water and soil losses thereby suggesting its immense application potential for priority area identification within the test watershed. In contrast to the proposed physical method, the subjective approaches, which assigned totally reverse priorities to about 67–93% of the test-sub-watersheds, were observed to be incapable of realistically assessing the impact of topography and varied land use and soil types in the test watershed on their sub-watershed scaled run-off and soil loss generating potential. Besides, the physical approach could be used for assessing the annual dynamics of the total water and sediment yields, under prevailing resource management systems in the test watershed with good to moderately good correlation coefficients of 0.83 and 0.65; model efficiency coefficients of 0.54 and 0.70; mean relative errors of –4.28% and –17.97% and root mean square prediction errors of 71.8 mm and 9.63 t/ha, respectively.     

Magnitude of pesticidal contamination in winter vegetables from Hisar,Haryana

Monitoring of 80 winter vegetable samples during 1997–1998 for pesticidal contamination was carried out on GC-ECD and GC-NPD systems with capillary columns following multiresidueanalytical technique. The tested samples were found 100%contaminated with low but measurable amounts of pesticideresidues. Among the four major chemical groups, residue levels oforganophosphorous insecticides were highest followed bycarbamates, synthetic pyrethroids and organochlorines. About 32%of the samples showed contamination with organophosphorous andcarbamate insecticides above their respective MRL values. On thebasis of observations made in these studies, it is suggested thatmore extensive monitoring studies covering all vegetable cropsfrom different agro-climatic regions of the state be carried outto know exact level of pesticidal contamination, which may serveas basis for future policy on chemical use.     

Evaluation of acoustical particle counter for the sizing of fog droplets

An acoustical particle counter (or acoustical particle sizing device) was evaluated for counting and sizing of fog droplets. Fog droplets were generated under controlled conditions in the laboratory. Fog droplet sizes were measured by an optical and an electron microscope and compared to results from the acoustical particle counter. Most of the droplets were found to be in the size range of 5–30 µm. The mean diameters estimated from the acoustical particle counter were in agreement with the microscope values of mean droplet diameter. A Rich 100 condensation nuclei monitor was also operated simultaneously during the fog droplet counting to monitor the condensation nuclei counts in the laboratory. The results indicate that condensation nuclei count is inversely correlated with the fog droplet threshold diameter. Aerosols of uniform size (35 µm) were generated by the vibrating orifice monodisperse aerosol generator and counted at three different flow rates by the acoustical particle counter. The counts/liter/minute were similar, indicating the reliability of the acoustical particle counter.     

Comparative studies on accumulation of Cr from metal solution and tannery effluent under repeated metal exposure by aquatic plants: its toxic effects

The present study demonstrates comparison of Cr accumulatingpotential by the plants of Najas indica Cham. (submerged),Vallisneria spiralis L. (rooted submerged) and Alternanthera sessilis R. Br. (rooted emergent) under repeatedmetal exposure and its effect on chlorophyll and protein concentrations. These plants were treated with different concentrations of Cr under repeated exposure in controlled laboratory conditions to assess the maximum metal accumulationpotential. The plants of V. spiralis accumulated significantly high amount of Cr under laboratory conditions incomparison to N. indica and A. sessilis. The maximumaccumulation of 1378, 458 and 201 g g^-1 dw Cr was found in the leaves of V. spiralis, N. indica and A. sessilis, respectively at 8 mg L^-1 after 9 day of Cr exposure. These plants have shown a decrease in chlorophyll andprotein concentrations with increase in Cr concentrations. In view of high accumulation of Cr in V. spiralis, the plantswere treated with different concentrations of tannery effluent collected from Common Effluent Treatment Plant, Unnao (UP). Theplants of V. spiralis treated with 100% tannery wastewatershowed the maximum accumulation (57.5 g g^-1 dw) of Cr in the roots after 10 days of exposure. The plants were foundeffective in removing Cr from solution and tannery effluent.     

Monitoring of Ganga Water and Sediments Vis-à-Vis Tannery Pollution at Kanpur (India): A Case Study

The leather industry, besides being a major contributorto the Indian national economy, is unfortunately alsoone of the major polluters. The present articlediscusses the influence of the wastes on thephysicochemical characteristics of the Ganga water andsediments. Two sampling sites have been chosen atKanpur, the first before and the second after thepoint where tanneries are located. The samephysicochemical parameters which have been determinedin the wastes have been monitored at these two sitesfor two seasons. The results reveal that mostparameters increase as the river traverses betweenthese two points. The increase in values of parameterssuch as BOD, COD, Cl^-, and total solids could bedue to the domestic wastes just as much as to thetannery wastes. Phenols and sulfides, can also comefrom other sources, but their probability of comingfrom tanneries is higher. However, chromium is oneparameter which can primarily be identified tooriginate from the tanneries. The speciation of thesediments for chromium reveals that the leakage ofchromium into the Ganga is taking place at the secondsite. There is almost a ten fold increase in chromiumat the second site as compared to the first. At thefirst site the surface chromium is primarily in theresidual fraction while at the second site it is inthe Fe–Mn oxide fractions.