Associations between particle number and gaseous co-pollutant concentrations in the Los Angeles Basin

Continuous measurements of particle number (PN), particle mass (PM10), and gaseous pollutants [carbon monoxide (CO), nitric oxide (NO), oxides of nitrogen (NOx), and ozone (O3)] were performed at five urban sites in the Los Angeles Basin to support the University of Southern California Children's Health Study in 2002. The degree of correlation between hourly PN and concentrations of CO, NO, and nitrogen dioxide (NO2) at each site over the entire year was generally low to moderate (r values in the range of 0.1-0.5), with a few notable exceptions. In general, associations between PN and O3 were either negative or insignificant. Similar analyses of seasonal data resulted in levels of correlation with large variation, ranging from 0.0 to 0.94 depending on site and season. Summertime data showed a generally higher correlation between the 24-hr average PN concentrations and CO, NO, and NO2 than corresponding hourly concentrations. Hourly correlations between PN and both CO and NO were strengthened during morning rush-hour periods, indicating a common vehicular source. Comparing hourly particle number concentrations between sites also showed low to moderate spatial correlations, with most correlation coefficients below 0.4. Given the low to moderate associations found in this study, gaseous co-pollutants should not be used as surrogates to assess human exposure to airborne particle number concentrations.     

Leaching of aluminium from cookwares -- a review

Concern over the possible relation between environmental aluminium exposure and Alzheimer's disease has prompted studies of all forms of human intake of this element including that from foods. Aluminium cookware, apart from other sources of dietary aluminium, is considered to be a potential source of this metal to human beings. Various research groups have carried out aluminium leaching experiments with food, beverages and water under different experimental conditions modified by varying the level of pH, chloride, fluoride, citrate, acetate etc. The results reported by different workers show marked discrepancies in levels of leached aluminum. The apparent reason for such discrepancy in levels of aluminum leached can be attributed to factors such as non-systematic and non-uniform experimental designs, non-standard conditions maintained during the experiments and choice of method for aluminium analysis. In order to assess accurately the contribution of aluminium ingestion by human beings through aluminium cookware, the present review emphasises the need of i) standard size aluminium plates obtained from the same lot for one set of experimentations; ii) real life cooking conditions to highlight the role of various complexing species present in food e.g. citrate, oxalate, acetate, tartrate etc.; iii) role of chemistry of aluminium in presence of acidic, basic and neutral cooking medium and iv) strict analytical control in the estimation of aluminium. Results of a systematic study by the authors conducted on the abovementioned lines are also described.     

Organochlorine insecticide residues in agricultural soils of the indo-gangetic plain

Multiple residues of organochlorine insecticides were monitored in the agricultural fields near Farrukhabad in the vicinity of the River Ganga in northern India for one year (1991–1992). Almost all soil samples were found to be contaminated with residues of hexachlorocylohexane (HCH) and dichlorodiphenyl-trichloroethane (DDT). Residues of aldrin and endosulfan were also detected in a large number of samples. Heptachlor residues were scarcely detected. Alpha-HCH, pp-DDT and alpha-endosulfan were found to dominate over the other isomers/metabolites of HCH, DDT and endosulfan, respectively. The average concentration of dieldrin was more than that of aldrin. The concentrations of residues progressively increased up to a depth of 1 m.     

Riverine pollution in some northern and north eastern states of india

Water samples from 30 rivers in northern and north-eastern hilly states of India were analysed for bacteriological and physicochemical parameters along with metals and pesticide residues. It was found that 34% of samples had >50 coliforms/100 ml, while 24% of samples demonstrated >50 thermotolerant (faecal) coliforms/100 ml. Among the metals, iron was found to be above maximum permissible limits in the rivers of all the states, while manganese was found to be above the maximum permissible limit in the rivers of Tripura and some northern states. Zinc, lead, nickel, chromium, copper, cobalt and cadmium plus physicochemical parameters and residual pesticides, however, were within their maximum permissible limits.     

Comparison of a Subjective and a Physical Approach for Identification of Priority Areas for Soil and Water Management in a Watershed – A Case Study of Nagwan Watershed in Hazaribagh District of Jharkhand, India

The present investigation was an attempt to compare the within-watershed prioritization capabilities of a physical model based SDSS with the SYI and RPI model based subjective-SDSS, conventionally devised for between-watershed prioritizations, by All India Soil Survey and Land Use Planning Division of Ministry of Agriculture, Government of India. Application of these two approaches on a test watershed situated in Damodar-Barakar catchment in India, the second most seriously eroded area in the world, demonstrated that the proposed physical model based SDSS was capable of realistically and logically mimicking the sub-watershed-scaled water and soil losses thereby suggesting its immense application potential for priority area identification within the test watershed. In contrast to the proposed physical method, the subjective approaches, which assigned totally reverse priorities to about 67–93% of the test-sub-watersheds, were observed to be incapable of realistically assessing the impact of topography and varied land use and soil types in the test watershed on their sub-watershed scaled run-off and soil loss generating potential. Besides, the physical approach could be used for assessing the annual dynamics of the total water and sediment yields, under prevailing resource management systems in the test watershed with good to moderately good correlation coefficients of 0.83 and 0.65; model efficiency coefficients of 0.54 and 0.70; mean relative errors of –4.28% and –17.97% and root mean square prediction errors of 71.8 mm and 9.63 t/ha, respectively.     

Magnitude of pesticidal contamination in winter vegetables from Hisar,Haryana

Monitoring of 80 winter vegetable samples during 1997–1998 for pesticidal contamination was carried out on GC-ECD and GC-NPD systems with capillary columns following multiresidueanalytical technique. The tested samples were found 100%contaminated with low but measurable amounts of pesticideresidues. Among the four major chemical groups, residue levels oforganophosphorous insecticides were highest followed bycarbamates, synthetic pyrethroids and organochlorines. About 32%of the samples showed contamination with organophosphorous andcarbamate insecticides above their respective MRL values. On thebasis of observations made in these studies, it is suggested thatmore extensive monitoring studies covering all vegetable cropsfrom different agro-climatic regions of the state be carried outto know exact level of pesticidal contamination, which may serveas basis for future policy on chemical use.     

Evaluation of acoustical particle counter for the sizing of fog droplets

An acoustical particle counter (or acoustical particle sizing device) was evaluated for counting and sizing of fog droplets. Fog droplets were generated under controlled conditions in the laboratory. Fog droplet sizes were measured by an optical and an electron microscope and compared to results from the acoustical particle counter. Most of the droplets were found to be in the size range of 5–30 µm. The mean diameters estimated from the acoustical particle counter were in agreement with the microscope values of mean droplet diameter. A Rich 100 condensation nuclei monitor was also operated simultaneously during the fog droplet counting to monitor the condensation nuclei counts in the laboratory. The results indicate that condensation nuclei count is inversely correlated with the fog droplet threshold diameter. Aerosols of uniform size (35 µm) were generated by the vibrating orifice monodisperse aerosol generator and counted at three different flow rates by the acoustical particle counter. The counts/liter/minute were similar, indicating the reliability of the acoustical particle counter.     

Microbe-mediated sustainable bio-recovery of gold from low-grade precious solid waste: A microbiological overview

In an era of electronics, recovering the precious metal such as gold from ever increasing piles of electronic-wastes and metal-ion infested soil has become one of the prime concerns for researchers worldwide. Biological mining is an attractive, economical and non-hazardous to recover gold from the low-grade auriferous ore containing waste or soil. This review represents the recent major biological gold retrieval methods used to bio-mine gold. The biomining methods discussed in this review include, bioleaching, bio-oxidation, bio-precipitation, bio-flotation, bio-flocculation, bio-sorption, bio-reduction, bio-electrometallurgical technologies and bioaccumulation. The mechanism of gold biorecovery by microbes is explained in detail to explore its intracellular mechanistic, which help it withstand high concentrations of gold without causing any fatal consequences. Major challenges and future opportunities associated with each method and how they will dictate the fate of gold bio-metallurgy from metal wastes or metal infested soil bioremediation in the coming future are also discussed. With the help of concurrent advancements in high-throughput technologies, the gold bio-exploratory methods will speed up our ways to ensure maximum gold retrieval out of such low-grade ores containing sources, while keeping the gold mining clean and more sustainable.     

Effectiveness of a cooling jacket with reference to physiological responses in iron foundry workers

Personal cooling garments (PCGs) have gained increased attention in recent years due to heat stress and strain in the working environment. The present study was conducted in hot environments of an iron foundry to evaluate the efficacy of a battery-operated PCG. Twenty-four workers were exposed to climatic conditions of 35.89?±?1.25?°C, 35% relative humidity during 90-min work with PCG and habitual clothing (HC). Mean weighted skin temperature was significantly lower by 4.84?±?1.05?°C compared with HC 0.38?±?1.02?°C (p?p?相似文献