Development and Preliminary Evaluation of a Particulate Matter Emission Factor Model for European Motor Vehicles

ABSTRACT

Although modeling of gaseous emissions from motor vehicles is now quite advanced, prediction of particulate emissions is still at an unsophisticated stage. Emission factors for gasoline vehicles are not reliably available, since gasoline vehicles are not included in the European Union (EU) emission test procedure. Regarding diesel vehicles, emission factors are available for different driving cycles but give little information about change of emissions with speed or engine load. We have developed size-specific speed-dependent emission factors for gasoline and diesel vehicles. Other vehicle-generated emission factors are also considered and the empirical equation for re-entrained road dust is modified to include humidity effects. A methodology is proposed to calculate modal (accelerating, cruising, or idling) emission factors. The emission factors cover particle size ranges up to 10 um, either from published data or from user-defined size distributions.

A particulate matter emission factor model (PMFAC), which incorporates virtually all the available information on particulate emissions for European motor vehicles, has been developed. PMFAC calculates the emission factors for five particle size ranges [i.e., total suspended particulates (TSP), PM₁₀, PM₅, PM₂₅, and PM₁] from both vehicle exhaust and nonexhaust emissions, such as tire wear, brake wear, and re-entrained road dust. The model can be used for an unlimited number of roads and lanes, and to calculate emission factors near an intersection in user-defined elements of the lane. PMFAC can be used for a variety of fleet structures. Hot emission factors at the user-defined speed can be calculated for individual vehicles, along with relative cold-to-hot emission factors. The model accounts for the proportions of distance driven with cold engines as a function of ambient temperature and road type (i.e., urban, rural, or motorway).

A preliminary evaluation of PMFAC with an available dispersion model to predict the airborne concentration in the urban environment is presented. The trial was on the A6 trunk road where it passes through Loughborough, a medium-size town in the English East Midlands. This evaluation for TSP and PM₁₀ was carried out for a range of traffic fleet compositions, speeds, and meteorological conditions. Given the limited basis of the evaluation, encouraging agreement was shown between predicted and measured concentrations.     

Comparative study of accessibility of distinctive pesticides

Interactions of micro-contaminants with soil may play a crucial role in their environmental fate and possible harmful effects. Major goals of our investigations were to model the availability of widely used pesticides and characterize adsorption capabilities of distinctive soil types by the accomplishment of extensive comparative studies and application of several extraction methods. Environmental and biological relevance of these examinations is enhanced by the fact that intrinsic features and specific details of pesticide accessibility have not been revealed so far by a comparative approach. Five different experimental methods were assessed for modelling accessibility of five selected pesticides. The applied models for regaining the pesticides showed diverse efficiency in extraction capability in cases of the different soil types (sandy, brown forest and alluvial soils). The amounts of the obtained pesticides were determined by using gas-chromatography coupled to mass spectrometry (GC-MS) and high pressure liquid chromatography coupled to mass spectrometry (HPLC-MS). Accessibility of pesticides was also compared in cases of sterilized and real soil samples in order to estimate the extent of the influence of microflora. Aqueous extraction solvents proved to be suitable for accurate assessment of the accessible amounts of pesticides, as their effectivity was at least as high as that of the applied organic solvents. In our studies pesticide-soil interactions have comprehensively been characterized, and possible influences of environmental factors on the accessibility have also been revealed. Our study might be regarded as a tentative approach to model some significant circumstances playing key roles in pesticides' possible bioavailability.     

Evaluation of bactericidal efficacy of silver ions on Escherichia coli for drinking water disinfection

Purpose

The purpose of this study is the development of a suitable process for the disinfection of drinking water by evaluating bactericidal efficacy of silver ions from silver electrodes.

Methods

A prototype of a silver ioniser with silver electrodes and control unit has been fabricated. Silver ions from silver electrodes in water samples were estimated with an atomic absorption spectrophotometer. A fresh culture of Escherichia coli (1.75?×?10³ c.f.u./ml) was exposed to 1, 2, 5, 10 and 20?ppb of silver ions in 100?ml of autoclaved tap water for 60?min. The effect of different pH and temperatures on bactericidal efficacy was observed at constant silver ion concentration (5?ppb) and contact time of 30?min.

Results

The maximum bactericidal activity (100%) was observed at 20?ppb of silver ion concentration indicating total disinfection after 20?min while minimum bactericidal activity (25%) was observed after 10?min at 01?ppb of silver ions. Likewise, 100% bactericidal activity was noticed with 2, 5 and 10?ppb of silver ions after 60, 50 and 40?min, respectively. Bactericidal activity at pH?5, 6, 7, 8 and 9 was observed at 79.9%, 79.8%, 80.5%, 100% and 100%, respectively, whereas it was 80.4%, 88.3%, 100%, 100% and 100% at 10°C, 20°C, 30°C, 40°C and 50°C, respectively.

Conclusion

The findings of this study revealed that very low concentrations of silver ions at pH?8?C9 and temperature >20°C have bactericidal efficacy for total disinfection of drinking water. Silver ionisation is suitable for water disinfection and an appropriate alternative to chlorination which forms carcinogenic disinfection by-products.     

Comparative bioremediation potential of four rhizospheric microbial species against lindane

Four microbial species (Kocuria rhizophila, Microbacterium resistens, Staphylococcus equorum and Staphylococcus cohnii subspecies urealyticus) were isolated from the rhizospheric zone of selected plants growing in a lindane contaminated environment and acclimatized in lindane spiked media (5-100 μg mL⁻¹). The isolated species were inoculated with soil containing 5, 50 and 100 mg kg⁻¹ of lindane and incubated at room temperature. Soil samples were collected periodically to evaluate the microbial dissipation kinetics, dissipation rate, residual lindane concentration and microbial biomass carbon (MBC). There was a marked difference (p < 0.05) in the MBC content and lindane dissipation rate of microbial isolates cultured in three different lindane concentrations. Further, the dissipation rate tended to decrease with increasing lindane concentrations. After 45 d, the residual lindane concentrations in three different spiked soils were reduced to 0%, 41% and 33%, respectively. Among the four species, S. cohnii subspecies urealyticus exhibited maximum dissipation (41.65 mg kg⁻¹) and can be exploited for the in situ remediation of low to medium level lindane contaminated soils.     

Residual behaviour and risk assessment of flubendiamide on chickpea (Cicer arietinum L.)

The study was undertaken to determine the disappearance trends of flubendiamide residues on chickpea under field conditions and thereby, ensure consumer safety. Average initial deposits of flubendiamide on chickpea pods were found to be 0.68 and 1.17 mg kg⁻¹, respectively, following three applications of flubendiamide 480SC @ 48 and 96 g a.i. ha⁻¹ at 7 d intervals. Half-life of flubendiamide on chickpea pods was observed to be 1.39 and 1.44 d, respectively, at single and double dosages whereas with respect to chickpea leaves, these values were found to be 0.77 and 0.86 d. Desiodo flubendiamide was not detected at 0.05 mg kg⁻¹ level on chickpea samples collected at different intervals. Theoretical maximum residue contribution (TMRC) for flubendiamide was calculated and found to be well below the maximum permissible intake (MPI) on chickpea pods and leaves at 0-day (1 h after spraying) for the both dosages. Thus, the application of flubendiamide at the recommended dose on chickpea presents no human health risks and is safe to the consumers.     

Chemistry of fogs at Agra, India: Influence of soil particulates and atmospheric gases

Fog water samples were collected in the months of December and January during 1998–2000 at Agra, India. The samples were analyzed for pH, major anions (F⁻, Cl⁻, SO₄ ²⁻, NO₃ ⁻, HCOO⁻ and CH₃COO⁻), major cations (Ca²⁺, Mg²⁺, Na⁺ and K⁺) and NH₄ ⁺ using ion chromatography, ICP-AES and spectrophotometer methods, respectively. pH of fog water samples ranged between 7.0 and 7.6 with a volume weighted mean of 7.2, indicating its alkaline characteristic. NH₄ ⁺ contributed 40%, SO₄ ²⁻ and NO₃ ⁻ accounted for 28%, while Ca²⁺, Mg²⁺, Na⁺ and K⁺ accounted for 16% of the total ionic concentration. The ratios of Mg²⁺/Ca²⁺ and Na⁺/Ca²⁺ in fog water indicates that 50–75% of fog water samples correspond to the respective ratios in local soil. Significant correlation between Ca²⁺, Mg²⁺, Na⁺ and K⁺ suggests their soil origin. The order of neutralization, NH₄ ⁺ (1.4) > Ca²⁺ (0.28) > Mg²⁺ (0.12), indicates that NH₄ ⁺ is the major neutralizing species. Fog water and atmospheric alkalinity were also computed and were found to be 873 and 903 neqm⁻³, respectively. Both of these values are higher than values reported from temperate sites and thus indicate that at the present level of pollutants, there is no risk of acid fog problem. The study also shows that the alkaline nature of fog water is due to dissolution of ammonia gas and partly due to interaction of fog water with soil derived aerosols.     

Uptake and translocation of metals in Spinacia oleracea L. grown on tannery sludge-amended and contaminated soils: effect on lipid peroxidation, morpho-anatomical changes and antioxidants

The plants of Spinacia oleracea L. grown on contaminated soil (CS) and different amendments of tannery sludge (TS) have shown high accumulation of metals in its edible part. The accumulation of toxic metal (Cr) in the leaves of the plants grown on CS was recorded as 40.67 microgg(-1)dw. However, the leaves of the plants grown on 100% TS have accumulated about two times (70.80 microgg(-1)dw) higher Cr than the 10% TS (31.21 microgg(-1)dw). Among growth parameters, the root length was more affected at 90 d than the shoot length, number of leaves and leaf area. The study of scanning electron micrographs showed 29.31% increase in stomatal length in the leaves of the plants grown on CS as compared to garden soil (GS), which served as control, however it decreased in the plants grown on higher amendments of TS. The decrease in MDA content at initial period of exposure and lower amendment was recorded in the leaves, whereas, significant increase (>10% TS onward) was observed with increase in tannery sludge ratio at 90 d as compared to GS. A coordinated increase in all the studied antioxidants (cysteine, non-protein thiol, ascorbic acid, carotenoid contents) was found up to 75 d of growth. At 90 d, most of the antioxidant decreased as compared to 75 d causing oxidative stress as evidenced by increased level of lipid peroxidation and decreased chlorophyll and protein contents. Maximum increase of 181.43% in MDA content and maximum decrease of 53.69% in total chlorophyll content was recorded in the leaves of the plants grown on 100% TS after 90 d of growth. The plants grown on CS have shown an increase in shoot length, number of leaves, leaf area, photosynthetic pigments and protein contents and in all the studied antioxidants. Thus, these plants are able to combat stress involving defense mechanism, resulting in healthy growth of the plants. The results are well coordinated as there is no change in the MDA content as compared to the plants grown on GS. In view of high Cr accumulation in edible part of S. oleracea grown on CS after irrigation with tap water, it is not advisable to use these plants for edible purposes. Summing up, it is recommended that the level of metals in the edible part should be checked instead of healthy growth as deciding parameter for consumption. It is demonstrated through this study that metal enriched plants have detoxification mechanism and grow well on organic matter enriched contaminated soil.     

Controlled release of thiram fungicide from starch-based hydrogels

In order to make the judicious use of thiram fungicide and to exploit the potential of agri-polymers, we have developed the starch- poly(acrylamide) and starch-poly(acrylic acid) based agrichemical delivery system (hydrogels) for its controlled and sustained release. Polymeric networks have been prepared by using N,N'-methylenebisacrylamide (N,N-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator and characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and swelling studies. Release dynamics of thiram fungicide from polymeric matrices has been studied for the evaluation of the diffusion mechanism and diffusion coefficients. It has been established that Non-Fickian diffusion mechanism has occurred for the release of thiram from these polymeric matrices. Furthermore, the initial rate of diffusion of thiram from these polymeric matrices is more as compared to the late stages of diffusion, which is analogous to the trends obtained for the diffusion of water molecules from these polymer matrices.     

Precipitation Chemistry and Occurrence of Acid Rain Over Dhanbad, Coal City of India

The present study investigated the chemical composition of wet atmospheric precipitation over Dhanbad, coal city of India. The precipitation samples were collected on event basis for three years (July 2003 to October 2005) at Central Mining Research Institute. The precipitation samples were analyzed for pH, conductivity, major anions (F, Cl, NO₃, SO₄) and cations (Ca, Mg, Na, K, NH₄). The pH value varied from 4.01 to 6.92 (avg. 5.37) indicating acidic to alkaline nature of rainwater. The pH of the rainwater was found well above the reference pH (5.6), showing alkalinity during the non-monsoon and early phase of monsoon, but during the late phase of monsoon, pH tendency was towards acidity (<5.6~pH) indicating the non-availability of proper neutralizer for acidic ions. The observed acidic events at this site were 91, (n = 162) accounting 56% for the entire monitoring months. The (NO₃ + Cl)/SO₄ ratio in majority of samples was found below 1.0, indicating that the acidity is greatly influenced by SO₄. The calculated ratio of (Ca + NH₄)/(NO₃ + SO₄) ranges between 0.42–5.13 (average 1.14), however in most of the samples, the ratio is greater than unity (>1.0) indicating that Ca and NH₄ play an important role in neutralization of acidic ions in rainwater. Ca and SO₄ dominate the bulk ionic deposition and these two ions along with NH₄ accounts 63% of the annual ionic deposition.