Cost Effective Production of Poly-β-Hydroxybutyrate by Bacillus subtilis NG05 Using Sugar Industry Waste Water

The present study describes the treatment of sugar industry waste water and its use as a potential low cost substrate for production of bioplastic by Bacillus subtilis NG05. The B. subtilis NG05 grow at the rate of 0.14 g h^?1 L^?1 of production media used and accumulate the 50.1 % of poly β-hydroxybutyrate (PHB). The phase contrast microscopy revealed the presence of PHB granules in B. subtilis NG05 which was further confirmed by Fourier transform infrared spectroscopy and ¹H-nuclear magnetic resonance. The polymer was further analysed by differential scanning calorimetry. PHB production yield was achieved up to 4.991 g L^?1 with Sugar industry waste water as sole nutrient source. Thus the process provided dual benefits of conversion of a waste material into value added product, PHB and waste management.     

Comparative study of solar-powered water production from atmospheric air using different desiccant materials

In this paper, experiments have been performed in order to determine the quantity of water produced from the atmospheric air using different desiccant materials named Silica gel, Activated alumina and Molecular sieve 13 X. On the bases of experimental results, a correlation is derived among the different temperatures and water production using Central Composite Design (CCD) of Response Surface Methodology. A newly designed solar glass desiccant box type system (SGDBS), three in number, has been used. Design parameters for the production of water has been taken as depth of material from the glass is 0.22 m, inclination in angle as 30°, effective thickness of glass as 3 mm and number of glazing as single. It has been found experimentally that the maximum quantity of water produced by Silica gel, Activated alumina and Molecular sieve 13 X is 160, 20 and 35 ml/kg/day, respectively. Whereas theoretically, value of water produced by the Silica gel, Activated alumina and Molecular sieve 13 X is 600, 28 and 60 ml/kg/day, respectively.     

A Review on the Present Scenario of Air Quality Associated with Indian Mining Operations

Compositional changes to air quality from coal mining are not only the most visible impact from these activities on the environment, they can also immediately affect the health of mine professionals and adjoining populations. The presence of gases and suspended solids emitted by mining activities affects the human respiratory system and decreases production in mines. This article summarizes a case study of several Northern Coalfields Limited (NCL) coal mines with an emphasis on particulate matter (PM) to report the status of air quality connected to coal production and overburden removal. The concentrations of sulfur dioxide (SO₂), nitrogen oxides (NO_x), and suspended particulate matter (SPM) reported in the literature are also summarized in table form to allow comparisons to the permissible standards set by the Indian Central Pollution Control Board (CPCB) and other standards used around the world. An up‐to‐date status of air quality at coal mines is compared for mines located in different parts of India. Subsequently, all coal mines were divided into different classes in regard to the severity of their emissions. These classes are, in increasing order of severity, green, yellow, red, and black. SPM measurements were tabulated in regard to concentration and composition. Our article concludes with the recommendation that an environmental impact assessment (EIA) to be conducted to better characterize changes in the environment from mining emissions to develop integrated mitigation measures and to identify additional parameters to define air quality at mines.     

Profenofos induced modulation in physiological indices,genomic template stability and protein banding patterns of Anabaena sp. PCC 7120

To understand the mechanism underlying organophosphate pesticide toxicity, cyanobacterium Anabaena PCC 7120 was subjected to varied concentrations (0, 5, 10, 20 and 30 mg L^?1) of profenofos and the effects were investigated in terms of changes in cellular physiology, genomic template stability and protein expression pattern. The supplementation of profenofos reduced the growth, total pigment content and photosynthetic efficiency of the test organism in a dose dependent manner with maximum toxic effect at 30 mg L^?1. The high fluorescence intensity of 2′, 7′ –dichlorofluorescin diacetate and increased production of malondialdehyde confirmed the prevalence of acute oxidative stress condition inside the cells of the cyanobacterium. Rapid amplified polymorphic DNA (RAPD) fingerprinting and SDS-PAGE analyses showed a significant alteration in the banding patterns of DNA and proteins respectively. A marked increase in superoxide dismutase, catalase, peroxidase activity and a concomitant reduction in glutathione content indicated their possible role in supporting the growth of Anabaena 7120 up to 20 mg L^?1. These findings suggest that the uncontrolled use of profenofos in the agricultural fields may not only lead to the destruction of the cyanobacterial population, but it would also disturb the nutrient dynamics and energy flow.     

Solar-driven technology for freshwater production from atmospheric air by using the composite desiccant material “CaCl<Subscript>2</Subscript>/floral foam”

In this communication, experiments have been performed to check the capability of the newly formed composite desiccant material (CaCl₂/floral) for the extraction of freshwater from atmospheric air. Three numbers of solar glass desiccant box type system (SGDBS) with a captured area of 0.36 m² each, have been used. The design parameters for the water production are height of glass from desiccant bed at 0.22 m, inclination in angle as 30°, the effective thickness of glass as 3 mm and number of glazing as single. The maximum yield by the new composite desiccant material is 0.35 ml/cm³/day. The efficiency of the system SGDBS with 37 % concentration of CaCl₂ is 76.44 %.     

A novel thermotolerant Pediococcus acidilactici B-25 strain for color, COD, and BOD reduction of distillery effluent for end use applications

The present study was aimed to characterize physico-chemical and microbial population of distillery effluent and isolate a novel thermotolerant bacterium for color, COD, and BOD reduction of spentwash. The level of alkalinity, TSS, DO, COD, BOD, TN, ammonical nitrogen, nitrate nitrogen, phosphorous, potassium, chloride, and calcium of spentwash (SW), bioreactor effluent (BE), and secondary treated effluent (STE) were well above the permissible limits. The level of color, TS, and TDS were under the permissible limits for STE but not for SW and BE. The microbial population was higher in BE. The results revealed that effluent was highly polluted and require suitable treatment before discharge. A novel thermotolerant bacterium, identified as Pediococcus acidilactici, was isolated which exhibited maximum 79 % decolorization, 85 % COD, and 94 % BOD reduction at 45 °C using 0.1 %, glucose; 0.1 %, peptone; 0.05 %, MgSO4; 0.05 %, K₂HPO₄; pH 6.0 within 24 h under static condition. The ability of this strain to decolorize melanoidin at minimum carbon and nitrogen supplementation warrants its possible application for effluent treatment at industrial level. In addition, it is first instance when melanoidin decolorization was reported by P. acidilactici. This study could be an approach towards control of environmental pollution and health hazards of people in and around the effluent distillery unit.     

Forecasting Daily Maximum Surface Ozone Concentrations in Brunei Darussalam—An ARIMA Modeling Approach

Abstract

A time series approach using autoregressive integrated moving average (ARIMA) modeling has been used in this study to obtain maximum daily surface ozone (O₃) concentration forecasts. The order of the fitted ARIMA model is found to be (1,0,1) for the surface O₃ data collected at the airport in Brunei Darussalam during the period July 1998-March 1999. The model forecasts of one-day-ahead maximum O₃ concentrations have been found to be reasonably close to the observed concentrations. The model performance has been evaluated on the basis of certain commonly used statistical measures. The overall model performance is found to be quite satisfactory as indicated by the values of Fractional Bias, Normalized Mean Square Error, and Mean Absolute Percentage Error as 0.025, 0.02, and 13.14% respectively.     

In-vitro toxicity of cyclophosphamide and etoposide intermediates/metabolites produced by three white rot fungi

Aim of the present study is to determine the in-vitro cell cytotoxic effect of native and transformed cancer drugs (cyclophosphamide and etoposide) using three different white rot fungi (Ganoderma lucidum, Phanerochaete chrysosporium and Trametes versicolor). At 3, 6, 9, 12 and 15 days, experiments were done on a mouse monocyte macrophage cell line (Raw 264.7). After biodegradation, the altered compounds were found to be harmful to the Raw 264.7 cells. The maximal cytotoxicity of cyclophosphamide transformed products (TPs) were determined to be 2.4%, 7.3% and 7% respectively, against G. lucidum, P. chrysosporium and T. versicolor, respectively. With G. lucidum, P. chrysosporium and T. versicolor, the etoposide toxicity was 1.5%, 8% and 2.7% respectively. P. chrysosporium-mediated biodegradation resulted in the maximum toxicity, at 8%, on the 12th day for etoposide and 7.3% on the 3rd day for cyclophosphamide. After biodegradation by fungi, the toxicity of these two anticancer agents was reduced in the form of metabolites, but each fungus showed unique capacity for toxicity removal.     

Assessment of Ambient Air Quality in Urban Centres of Haryana (India) in Relation to Different Anthropogenic Activities and Health Risks

Considering the mounting evidences of the effects of air pollution on health, the present study was undertaken to assess the ambient air quality status in the fast growing urban centres of Haryana state, India. The samples were collected for total suspended particulate matter (TSPM), respirable suspended particulate matter (PM₁₀), sulfur dioxide (SO₂), and oxides of nitrogen (NO₂) during different seasons from 8 districts of Haryana during January, 1999 to September, 2000. The four types of sampling sites with different anthropogenic activities i.e. residential, sensitive, commercial and industrial were identified in each city. The ambient air concentration of TSPM and PM₁₀ observed was well above the prescribed standards at almost all the sites. The average ambient air concentrations of SO₂ and NO₂ were found below the permissible limits at all the centres. Comparatively higher concentration of SO₂ was observed during winter seasons, which seems to be related with the enhanced combustion of fuel for space heating and relatively stable atmospheric conditions. Air Quality Index (AQI) prepared for these cities shows that residential, sensitive and commercial areas were moderately to severely polluted which is a cause of concern for the residents of these cities. The high levels of TSPM and SO₂ especially in winter are of major health concern because of their synergistic action. The data from Hisar city reveals a significant increase in the total number of hospital visits/admissions of the patients with acute respiratory diseases during winter season when the level of air pollutants was high.