Non-timber forest products certification in India: opportunities and challenges

Forest certification has emerged as a marketing tool for linking the good forest management practices with the environmentally conscious consumers. Its genesis can be attributed to the society’s concern for the social and environmental significance of forests. Forest management certification when coupled with the chain-of-custody certification; then, the supply chain stages for such forest products can carry an ecolabel. Non-timber forest products (NTFPs) are of socio-economic and cultural importance for the forest dwelling communities, particularly for the tropical countries like India. India is home to an amazing diversity of plants, with over 46,000 plant species recorded to occur there. NTFP’s availability, utilization, commercialization, exploitation, management practices, policies and tenure systems in different parts of India have high diversity and variability. There is concern, however, that collection methods for most of NTFP species are destructive and wild populations are declining as a result. Thus, the harvest of NTFPs is coming under increasing scrutiny from certification programmes, as it plays a key role in the sustainable management of forest resources and community benefit worldwide. Thus, the present research paper highlights the issues relevant to certification of NTFPs in India, based on more than a decadal experience in dealing with this subject at Indian Institute of Forest Management, Bhopal.     

Environmental exposure to urinary Bisphenol-A in North Indian children aged between 6 and 16 years and its association with body mass index

Environmental Science and Pollution Research - This study investigates the effect of environmental risk factors among North Indian children aged between 6 and 16 years associated with body mass...     

Biological-based methods for the removal of volatile organic compounds (VOCs) and heavy metals

Environmental Science and Pollution Research - The current scenario of increased population and industrial advancement leads to the spoliation of freshwater and tapper of the quality of water....     

Energy and exergy analysis of a PCM-based solar powered winter air conditioning using desiccant wheel during nocturnal

In this paper, heating and humidification of air for space have been carried out by using a phase change material (PCM)-based solar-powered desiccant wheel air conditioning (SPDWAC) in winter. The analysis of the setup has been done at different air flow rates. At low and high air flow rates, system has mean thermal coefficient of performance of 0.121 and 0.172, respectively, and mean exergy efficiency of 0.0787 and 0.0846, respectively. The mean thermal coefficient of performance of the system at high air flow rate (127.23 kg h-1) is 1.42 times the low air flow rate (63.62 kg h-1) and average exergy efficiency of the system at high air flow rate is 1.07 times the low air flow rate. It is observed that with an increase in air flow rate, efficiency of the evacuated tube solar air collector (ETSAC) increases. The average efficiency of the ETSAC at high air flow rate is 15.60%. The maximum average energy efficiency (17.80%) and exergy efficiency (17.08%) of the PCM storage system have been obtained at high air flow rate. The overall performance of the system showed that the use of PCM storage is feasible to run the system in winter during the hours of darkness.     

Experimental investigation of solar-powered desiccant cooling system by using composite desiccant “CaCl<Subscript>2</Subscript>/jute”

A solar-powered composite desiccant cooling system has been experimentally investigated. It consists of evacuated tube solar water heater, composite desiccant bed heat exchanger (CDBHE), direct evaporative cooling unit and cooling tower. The composite desiccant material has been synthesized by using iron mesh and jute layer impregnated with calcium chloride solution, and this composite desiccant is placed in shell- and tube-type heat exchanger to make CDBHE. In this desiccant cooling system, the evacuated tube solar water heater is used to produce required hot water for regeneration of composite desiccant material. A cooling tower is used to produce cooling water which is pumped into CDBHE during dehumidification process to remove heat of adsorption. Direct evaporative cooling unit is used to cool the outlet process air of CDBHE. It has been found that the average dehumidification rate increases by 54.1 % when using circulating cooling water. The COP_th of desiccant cooling system has been found to be 0.46 with a cooling capacity of 353.8 W.     

Source identification of particulate matter and associated intake of elements through inhalation in an industrial area of Odisha,India

Particulate matter concentrations were measured in an industrial region in the Ganjam district of Odisha. The average levels of suspended particulate matter (SPM) were measured to be 142 ± 8 and PM₁₀ of particulate matter with a size of less than 10 micrometers (PM₁₀) to be 50 ± 15 μg m^?3. Out of the 14 elements determined, Ca, Na, Mg, Fe, and K contributed more than 95% of the total weight. In enrichment factors, the trace elements, i.e., Zn, Pb, Cd, and Hg were observed to be highly enriched in the SPM and PM₁₀. Factor analysis indicates that more than 75% of the variance was due to five component factors, which have eigenvalues greater than 1. Intake of elements through inhalation route to adults has been estimated.     

Development,validation of QuEChERS-based method for simultaneous determination of multiclass pesticide residue in milk,and evaluation of the matrix effect

Extraction and quantification of pesticide residue from the milk matrix at or below the established maximum residue limit (MRL) is a challenging task for both analytical chemists and the regulatory institutions to take corrective actions for the human health and safety. The main aim of the study is to develop a simple rapid and less expensive QuEChERS extraction and cleanup method for simultaneous analysis of 41 multiclass pesticide residue in milk by gas chromatography-electron capture detector (GC-ECD), followed by confirmation of the residues with gas chromatography-mass spectrometer (GC-MS). Effect of sorbent type, temperature, spiking concentration, matrix effect (ME), measurement uncertainty (MU), inter- and intra-assay repeatability, reproducibility of recovery, and trueness of the results were investigated to validate the effectiveness of the method. Limit of determination (LOD) and limit of quantitation (LOQ) for all the analytes ranged within 0.001–0.02 and 0.002–0.05 µg mL^?1, respectively. The % recovery of all the pesticides ranged between 91.38 and 117.56% with relative standard deviation (RSD) below 2.79%. The MU for all the analytes was ≤29% of respective LOQs, and except for few pesticides, the ME was largely negative. The method fulfilled all the SANTE guidelines and thus can be extended for routine analysis of multiclass pesticide residue in milk.     

Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.     

Bacterial response to dynamic metal concentrations in the surface sediments of a solar saltern (Goa, India)

The Ribandar solar saltern, situated adjacent to the Mandovi estuary is influenced by the barge transport of ferromanganese ore to the Mormugao harbour (Arabian Sea). The current study focuses on the distribution of metals and related heterotrophic bacterial populations in the surface sediments (0–10 cm) of the Ribandar salterns (Goa, India) during the salt-making (January to May) and non salt-making seasons (August and November). The concentrations of heavy metals in the sediments ranged from 17.2?±?2.8 to 26.3?±?6.7 % Fe; 0.6?±?0.2 to 0.9?±?0.2 % Mn; 27.6?±?7.3 to 51?±?8.3 ppm Ni; 28.4?±?8.9 to 35.2?±?10.6 ppm Co; 44?±?21.6 to 62.8?±?23.6 ppm Zn; 0.1?±?0.01 ppm Cd and 1.7?±?0.1 to 2.6?±?0.7 ppm Pb and were much higher than those reported at the same site in a previous study by Kerkar (2004). Hg concentrations were below detection limits. In general, computation of “geoaccumulation index” revealed the sediments as ‘uncontaminated to moderately contaminated’ with Fe, Mn, Ni, Co, Pb and Zn during the salt-making season. The abundance of metal-tolerant bacteria was comparatively restricted to the salt-making season and was higher than the non salt-making season. Fe-, Mn-, Ni-, Co- and Pb- (200 ppm) tolerant bacteria were retrieved and restricted to the surface sediments (0–5 cm), Cd and Fe being the two most regulatory elements governing bacterial populations in the non salt-making season. However, during the salt-making season, the concentration of Zn was found to be pivotal in regulating the counts of Fe-, Mn- and Ni-tolerant bacteria. In general, the strength of correlation of metals and microbes was higher in the non salt-making season as compared to the salt-making season. This would probably indicate metal-induced limitations in microbial populations in the non salt-making season and the absence of this effect during the salt-making season. In this study, we test the hypothesis that solar salterns behave as ecological sinks with a potential to transform native bacterial populations to metal-resistant strains, in relation to the dynamic changes in the surrounding metal concentrations.     

Influence of mercury from fly ash on cattle reared nearby thermal power plant

Cattle grazing nearby coal-fired power stations are exposed to fly ash. The present investigation aims to assess the environmental and health impacts of fly ash containing mercury emitted from thermal power plant. The health effect of fly ash were studied using 20 lactating cattle reared within a 5-km radius of s thermal power plant for the possible effect of fly ash such as the alterations in hematological and biochemical parameters of blood, milk, and urine. Results indicated that the hemoglobin levels (6.65?±?0.40?g/dl) were significantly reduced in all the exposed animals. Biochemical parameters viz., blood urea nitrogen (27.35?±?1.19?mg/dl), serum glutamate oxaloacetate transaminase (43.39?±?3.08?IU/l), albumin, and creatinine were found to be increased, whereas serum glutamate pyruvic transaminase (29.26?±?2.02) and Ca²⁺ were observed to be statistically insignificant in exposed animals. Mercury concentrations estimated in the blood, milk, and urine of exposed (n?=?20) and control (n?=?20) animals were 7.41?±?0.86, 4.75?±?0.57, 2.08?±?0.18, and 1.05?±?0.07, 0.54?±?0.03, 0.20?±?0.02?μg/kg, respectively. The significant increase (P?<?0.01) in the levels of mercury in blood, milk, and urine of exposed animals in comparison to control indicated that the alterations of biochemical parameters in exposed cattle could be due to their long term exposure to fly ash mercury which may have direct or indirect impact on human populations via food chain.