Rapid reductive dechlorination of atrazine by zero-valent iron under acidic conditions

The dechlorination of atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) via reaction with metallic iron under low-oxygen conditions was studied using reaction mixture pH values of 2.0, 3.0, and 3.8. The pH control was achieved through addition of sulfuric acid throughout the duration of the reaction. The lower the pH of the reaction mixture, the faster the degradation of atrazine. The surface area of the sulfuric acid-treated iron particles was 0.31 (+/- 0.01) m2 g-1 and the surface area normalized initial pseudo-first order rate constants (kSA, where rate = kSA x (surface area/l) x [Atrazine]) at pH values of 2.0, 3.0, and 3.8 were equal to, respectively, 3.0 (+/- 0.4) x 10(-3) min-1 m-2 l, 5 (+/- 3) x 10(-4) min-1 m-2 l, and 1 (+/- 1) x 10(-4) min-1 m-2 l. The observed products of the degradation reaction were dechlorinated atrazine (2-ethylamino-4-isopropylamino-1,3,5-triazine) and possibly hydroxyatrazine (2-ethylamino-4-isopropylamino-6-hydroxy-s-triazine). Triazine ring protonation may account, at least in part, for the observed effect of pH on atrazine dechlorination via metallic iron.     

RESERVOIR MANAGEMENT RULES DERWED WITH THE AID OF MULTIPLE OBJECTIVE DECISION MAKING TECHNIQUES1

ABSTRACT: The determination of optimum reservoir operating rules for reservoirs with multiple conflicting objectives is still a difficult task - despite many publications in this field. In this paper a three-step Multi Objective Decision Making (MODM) method is presented, the emphasis of which is placed on the necessity to make the work easy for the decision maker, which many MODM techniques fail to achieve. The method is applied to the development of a compromise optimum operating rule for a multi-purpose reservoir. In the first step of the method stochastic DP is chosen which is combined with the “weighting method” allowing combination of various objectives into one objective function. By systematically varying the weights for the objectives a large number of pareto optimum reservoir operating rules is generated. In the second step of the method the performance of all these operating rules is tested with the aid of a model simulating reservoir operation. The results are statistically analyzed and the reliabilities for attaining the various objectives are computed. The third step of the model applies another MODM technique which allows the decision maker - in a computer dialog - to select his optimum reservoir operating rule from the large number of pareto optimum solutions generated in step 1. Here he can specify his preferences for the various objectives. For this purpose two alternative MODM techniques are offered: Compromise Programming and the SEMOPS method. Their performance is shown along with the generation and selection of operating rules for the multi-objective Wupper reservoir system in Germany.     

Evaluation of biodegradation of nonylphenol ethoxylate and lignin by combining toxicity assessment and chemical characterization

The aerobic biodegradation of commercial nonylphenol ethoxylate (NPE) mixture and alkali lignin was studied using the OECD headspace test accompanied by the simultaneous measurement of ecotoxicity directly from the biodegradation liquors and by the follow-up of the chemical composition of the studied chemicals. NPE degradation was dependent on the inoculum source: approximately 40% of NPE was mineralized into CO₂ during the 4-week experiment when inoculum from Helsinki City wastewater treatment plant (WWTP) was used, and only 12% was mineralized when inoculum from Jyväskylä City WWTP was used. Chemical analyses revealed a shift in the ethoxylate chain length from longer to shorter soon after the beginning of the NPE biodegradation tests. At the same time also toxicity (reverse electron transport assay, RET) and estrogenic activity (human estrogen receptor yeast) measured directly from the biodegradation liquors decreased. In case of alkali lignin, approximately 11% was mineralized in the test and chemical analysis showed in maximum a 30% decrease in lignin concentration. Toxicity of lignin biodegradation liquors started to decrease in the beginning of the test, but became more toxic towards the end of the test again. Especially RET assay proved to be sensitive enough for measuring toxicity changes directly from biodegradation liquors, although a concentrating treatment of the liquors is recommended for a more detailed characterization and identification of toxic metabolites.     

Comparative embryotoxicity of a pentabrominated diphenyl ether mixture to common terns (Sterna hirundo) and American kestrels (Falco sparverius)

Concentrations of polybrominated diphenyl ethers (PBDEs) in Forster’s tern (Sterna forsteri) eggs from San Francisco Bay have been reported to range up to 63 μg g⁻¹ lipid weight. This value exceeds the lowest-observed-adverse-effect level (1.8 μg g⁻¹ egg wet weight; ∼32 μg⁻¹ lipid weight) reported in an embryotoxicity study with American kestrels (Falco sparverius). As a surrogate for Forster’s terns, common tern (Sterna hirundo) eggs were treated by air cell injection with corn oil vehicle (control) or a commercial penta-BDE formulation (DE-71) at nominal concentrations of 0.2, 2, and 20 μg g⁻¹ egg. As a positive control, kestrel eggs received vehicle or 20 μg DE-71 g⁻¹ egg. In terns, there were no effects of DE-71 on embryonic survival, and pipping or hatching success; however, treated eggs hatched later (0.44 d) than controls. Organ weights, organ-to-body weight ratios, and bone lengths did not differ, and histopathological observations were unremarkable. Several measures of hepatic oxidative stress in hatchling terns were not affected by DE-71, although there was some evidence of oxidative DNA damage (8-hydroxy-deoxyguanosine; 8-OH-dG). Although DE-71 did not impair pipping and hatching of kestrels, it did result in a delay in hatch, shorter humerus length, and reduced total thyroid weight. Concentrations of oxidized glutathione, reduced glutathione, thiobarbituric acid reactive substances, and 8-OH-dG in liver were greater in DE-71-treated kestrels compared to controls. Our findings suggest common tern embryos, and perhaps other tern species, are less sensitive to PBDEs than kestrel embryos.     

A study on identification of bacteria in environmental samples using single-cell Raman spectroscopy: feasibility and reference libraries

We report on our recent efforts towards identifying bacteria in environmental samples by means of Raman spectroscopy. We established a database of Raman spectra from bacteria submitted to various environmental conditions. This dataset was used to verify that Raman typing is possible from measurements performed in non-ideal conditions. Starting from the same dataset, we then varied the phenotype and matrix diversity content included in the reference library used to train the statistical model. The results show that it is possible to obtain models with an extended coverage of spectral variabilities, compared to environment-specific models trained on spectra from a restricted set of conditions. Broad coverage models are desirable for environmental samples since the exact conditions of the bacteria cannot be controlled.     

Cosolvent flushing for the remediation of PAHs from former manufactured gas plants

Cosolvent flushing is a technique that has been proposed for the removal of hydrophobic organic contaminants in the subsurface. Cosolvents have been shown to dramatically increase the solubility of such compounds compared to the aqueous solubility; however, limited data are available on the effectiveness of cosolvents for field-contaminated media. In this work, we examine cosolvent flushing for the removal of polycyclic aromatic hydrocarbons (PAHs) in soil from a former manufactured gas plant (FMGP). Batch studies confirmed that the relationship between the soil-cosolvent partitioning coefficient (K(i)) and the volume fraction of cosolvent (f(c)) followed a standard log-linear equation. Using methanol at an fc of 0.95, column studies were conducted at varying length scales, ranging from 11.9 to 110 cm. Removal of PAH compounds was determined as a function of pore volumes (PVs) of cosolvent flushed. Despite using a high f(c), rate and chromatographic effects were observed in all the columns. PAH effluent concentrations were modeled using a common two-site sorption model. Model fits were improved by using MeOH breakthrough curves to determine fitted dispersion coefficients. Fitted mass-transfer rates were two to three orders of magnitude lower than predicted values based on published data using artificially contaminated sands.     

RIPARIAN LAND USES AND PRECIPITATION INFLUENCES ON STREAM BANK EROSION IN CENTRAL IOWA1

Human alterations to the Iowa landscape, such as elimination of native vegetation for row crop agriculture and grazing, channelization of streams, and tile and ditch drainage, have led to deeply incised channels with accelerated streambank erosion. The magnitude of streambank erosion and soil loss were compared along Bear Creek in central Iowa. The subreaches are bordered by differing land uses, including reestablished riparian forest buffers, row crop fields, and continuously grazed riparian pastures. Erosion pins were measured from June 1998 to July 2002 to estimate the magnitude of streambank erosion. Total streambank soil loss was estimated by using magnitude of bank erosion, soil bulk density, and severely eroded bank area. Significant seasonal and yearly differences in magnitude of bank erosion and total soil loss were partially attributed to differences in precipitation and associated discharges. Riparian forest buffers had significantly lower magnitude of streambank erosion and total soil loss than the other two riparian land uses. Establishment of riparian forest buffers along all of the nonbuffered subreaches would have reduced stream‐bank soil loss by an estimated 77 to 97 percent, significantly decreasing sediment in the stream, a major water quality problem in Iowa.