Cytoenzymatic investigation of intracellular digestion in the symbiont-bearing hydrothermal bivalve <Emphasis Type="Italic">Bathymodiolus azoricus</Emphasis>

Invertebrates harbouring endosymbiotic chemoautotrophic bacteria are widely distributed in a variety of reducing marine habitats, including deep-sea hydrothermal vents. Bathymodiolids are dominants of the biomass at geochemically distinct vent sites of the Mid Atlantic Ridge (MAR) and thus are good candidates to study biological processes in response to site-specific conditions. To satisfy their nutritional requirements, these organisms depend to varying extent on two types of chemoautotrophic symbionts and on filterfeeding. The quantitative relationships of the nutritional modes are poorly understood. Using enzyme cytochemistry, electron microscopy and X-ray microanalysis, the structural and functional aspects of the cellular equipment necessary for lysosomal digestion was studied. We provide evidence for the following: (1) the basis of intracellular digestion of symbionts in Bathymodiolus azoricus from two geochemically distinct vent sites was not mainly in the large lysosomal bodies as previously thought (based on the membranous content resembling bacteria); (2) senescent bacteria are autolysed, possibly by bacterial acid phosphatase, that is more likely a cell cycling of the symbionts rather than an active lysosomal digestion by the host; (3) the consistent absence of hydrolases may indicate the improper use of the name “lysosome” for large vesicles at the base of the gill bacteriocytes (4) nutrient transfer in B. azoricus, therefore, may more likely be accomplished through leaking of metabolites from the symbiont to the host, not excluding lysosomal resorption of dead bacteria as an auxiliary strategy for organic molecule transfer; (5) evidence is provided for microvillar transfer of substances from the seawater that may indicate filter-feeding, in non-symbiotic ciliated gill cells of mussels from Lucky Strike; (6) two types of lysosomal vesicles can be distinguished in digestive cells based on their enzymatic content and their elemental composition.     

Social foraging and dominance relationships: the effects of socially mediated interference

In socially foraging animals, it is widely acknowledged that the position of an individual within the dominance hierarchy of the group has a large effect upon its foraging behaviour and energetic intake, where the intake of subordinates can be reduced through socially mediated interference. In this paper, we explore the effects of interference upon group dynamics and individual behaviour, using a spatially explicit individual-based model. Each individual follows a simple behavioural rule based upon its energetic reserves and the actions of its neighbours (where the rule is derived from game theory models). We show that dominant individuals should have larger energetic reserves than their subordinates, and the size of this difference increases when either food is scarce, the intensity of interference suffered by the subordinates increases, or the distance over which dominant individuals affect subordinates increases. Unlike previous models, the results presented in this paper about differences in reserves are not based upon prior assumptions of the effects of social hierarchy and energetic reserves upon predation risk, and emerge through nothing more than a reduction in energetic intake by the subordinates when dominants are present. Furthermore, we show that increasing interference intensity, food availability or the distance over which dominants have an effect also causes the difference in movement between ranks to increase (where subordinates move more than dominants), and the distance over which dominants have an effect changes the size of the groups that the different ranks are found in. These results are discussed in relation to previous studies of intra- and interspecific dominance hierarchies.     

Simulation of herbicide impacts on a plant community: comparing model predictions of the plant community model IBC-grass to empirical data

Background

Semi-natural plant communities such as field boundaries play an important ecological role in agricultural landscapes, e.g., provision of refuge for plant and other species, food web support or habitat connectivity. To prevent undesired effects of herbicide applications on these communities and their structure, the registration and application are regulated by risk assessment schemes in many industrialized countries. Standardized individual-level greenhouse experiments are conducted on a selection of crop and wild plant species to characterize the effects of herbicide loads potentially reaching off-field areas on non-target plants. Uncertainties regarding the protectiveness of such approaches to risk assessment might be addressed by assessment factors that are often under discussion. As an alternative approach, plant community models can be used to predict potential effects on plant communities of interest based on extrapolation of the individual-level effects measured in the standardized greenhouse experiments. In this study, we analyzed the reliability and adequacy of the plant community model IBC-grass (individual-based plant community model for grasslands) by comparing model predictions with empirically measured effects at the plant community level.

Results

We showed that the effects predicted by the model IBC-grass were in accordance with the empirical data. Based on the species-specific dose responses (calculated from empirical effects in monocultures measured 4 weeks after application), the model was able to realistically predict short-term herbicide impacts on communities when compared to empirical data.

Conclusion

The results presented in this study demonstrate an approach how the current standard greenhouse experiments—measuring herbicide impacts on individual-level—can be coupled with the model IBC-grass to estimate effects on plant community level. In this way, it can be used as a tool in ecological risk assessment.

     

The metabolic demands of swimming behavior influence the evolution of skeletal muscle fiber design in the brachyuran crab family Portunidae

We investigated the influence of intracellular diffusion on muscle fiber design in several swimming and non-swimming brachyuran crabs. Species with sustained swimming behavior had aerobic dark fibers subdivided into small metabolic functional units, creating short diffusion distances necessary to support the high rates of aerobic ATP turnover associated with endurance activity. This dark fiber design was observed in all swimming species including Ovalipes ocellatus, which has apparently evolved swimming behavior independently of other Portunidae. In addition, we observed fiber and subdivision size-dependent differences in organelle distribution. Mitochondria, which rely on oxygen to function, were uniformly distributed in small fibers/subdivisions, but were clustered at the fiber periphery in larger fibers. The inverse pattern was observed for nuclei, which are not oxygen dependent, but rely on the transport of slow diffusing macromolecules. Phylogenetically independent contrast analysis revealed that these relationships were largely independent of phylogeny. Our results demonstrate cellular responses to diffusion that were necessary for the evolution of swimming and that are likely to be broadly applicable.     

Kelp as a Bioindicator: Does it Matter Which Part of 5 M Long Plant is Used for Metal Analysis?

Kelp may be useful as a bioindicator because they are primary producers that are eaten by higher trophic level organisms, including people and livestock. Often when kelp or other algae species are used as bioindicators, the whole organism is homogenized. However, some kelp can be over 25 m long from their holdfast to the tip of the blade, making it important to understand how contaminant levels vary throughout the plant. We compared the levels of arsenic, cadmium, chromium, lead, manganese, mercury and selenium in five different parts of the kelp Alaria nana to examine the variability of metal distribution. To be useful as a bioindicator, it is critical to know whether levels are constant throughout the kelp, or which part is the highest accumulator. Kelp were collected on Adak Island in the Aleutian Chain of Alaska from the Adak Harbor and Clam Cove, which opens onto the Bering Sea. In addition to determining if the levels differ in different parts of the kelp, we wanted to determine whether there were locational or size-related differences. Regression models indicated that between 14% and 43% of the variation in the levels of arsenic, cadmium, chromium, manganese, mercury, and selenium was explained by total length, part of the plant, and location (but not for lead). The main contributors to variability were length (for arsenic and selenium), location (mercury), and part of the plant (for arsenic, cadmium, chromium and manganese). The higher levels of selenium occurred at Clam Cove, while mercury was higher at the harbor. Where there was a significant difference among parts, the holdfast had the highest levels, although the differences were not great. These data indicate that consistency should be applied in selecting the part of kelp (and the length) to be used as a bioindicator. While any part of Alaria could be collected for some metals, for arsenic, cadmium, chromium, and manganese a conversion should be made among parts. In the Aleutians the holdfast can be perennial while the blade, whipped to pieces by winter wave action, is regrown each year. Thus the holdfast may be used for longer-term exposure for arsenic, cadmium, chromium and manganese, while the blade can be used for short-term exposure for all metals. Cadmium, lead and selenium were at levels that suggest that predators, including people, may be at risk from consuming Alaria. More attention should be devoted to heavy metal levels in kelp and other algae from Adak, particularly where they may play a role in a subsistence diets.     

Spatial trends of organochlorinated pesticides,polychlorinated biphenyls,and polybrominated diphenyl ethers in Atlantic Anguillid eels

The bioaccumulation of lipophilic contaminants such as polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), and polybrominated diphenyl ethers (PBDEs) can result in a reduction in fitness and spawner quality in eels and may be a factor in Anguillid sp. population declines. Contaminant concentrations in eels have been studied extensively in Europe, but data for American eels are severely lacking. Concentrations of PCBs, OCPs, and PBDEs were determined in American eel from eastern Canada and New York, USA, along with European eel from Belgium. Principal component analysis revealed that eels captured in the St. Lawrence estuary were a mixture of upstream migrants from the St. Lawrence River watershed, and fish captured in local tributaries. Contaminant concentrations were dependent on origin, related to the local environment, and were lower than historic values. In Canada, concentrations of OCPs and PCBs in eel tissues were below the Canadian human consumption guidelines for contaminants in fish, indicating that the current risk to consumers is low. However, concentrations of PCBs, total DDT, and mirex in eels from L. Ontario and the upper St. Lawrence R. were above Great Lakes guidelines for the protection of piscivorous predators. Concentrations of penta-BDE homologs exceeded the Canadian guideline for environmental quality in over half of the eels in this study, but concentrations of the other homolog groups were below the guideline.     

Deposition and removal of fugitive dust in the arid southwestern United States: measurements and model results

This work was motivated by the need to better reconcile emission factors for fugitive dust with the amount of geologic material found on ambient filter samples. The deposition of particulate matter with aerodynamic diameter less than or equal to 10 microm (PM10), generated by travel over an unpaved road, over the first 100 m of transport downwind of the road was examined at Ft. Bliss, near El Paso, TX. The field conditions, typical for warm days in the arid southwestern United States, represented sparsely vegetated terrain under neutral to unstable atmospheric conditions. Emission fluxes of PM10 dust were obtained from towers downwind of the unpaved road at 7, 50, and 100 m. The horizontal flux measurements at the 7 m and 100 m towers indicated that PM10 deposition to the vegetation and ground was too small to measure. The data indicated, with 95% confidence, that the loss of PM10 between the source of emission at the unpaved road, represented by the 7 m tower, and a point 100 m downwind was less than 9.5%. A Gaussian model was used to simulate the plume. Values of the vertical standard deviation sigma(z) and the deposition velocity Vd were similar to the U.S. Environmental Protection Agency (EPA) ISC3 model. For the field conditions, the model predicted that removal of PM10 unpaved road dust by deposition over the distance between the point of emission and 100 m downwind would be less than 5%. However, the model results also indicated that particles larger than 10 microm (aerodynamic diameter) would deposit more appreciably. The model was consistent with changes observed in size distributions between 7 m and 100 m downwind, which were measured with optical particle counters. The Gaussian model predictions were also compared with another study conducted over rough terrain and stable atmospheric conditions. Under such conditions, measured PM10 removal rates over 95 m of downwind transport were reported to be between 86% and 89%, whereas the Gaussian model predicted only a 30% removal. One explanation for the large discrepancy between measurements and model results was the possibility that under the conditions of the study, the dust plume was comparable in vertical extent to the roughness elements, thereby violating one of the model assumptions. Results of the field study reported here and the previous work over rough terrain bound the extent of particle deposition expected to occur under most unpaved road emission scenarios.     

Synthesis of mono- and dimethoxylated polychlorinated biphenyl derivatives starting from fluoroarene derivatives

Environmental Science and Pollution Research - Polychlorinated biphenyls (PCBs) are environmental pollutants implicated in a variety of adverse health effects, including cancer and noncancer...     

Bottled water: how safe is it?

Sales of bottled water have increased dramatically in recent years, with worldwide sales of more than dollars 35 billion, largely because of the public perception of purity and safety and public concern about the quality of tap water. Presently, there are no Food and Drug Administration (Washington, D.C.) recommendations regarding temperature and duration of storage for bottled water once it is opened and used. The objectives of this study were to examine the effects of time and storage temperature on bacterial growth and characterize the types of microorganisms contaminating bottled water after drinking once from the bottle. Bottled and tap water were tested using standard microbiology culture techniques. The bacterial count in bottled water increased dramatically, from less than 1 colony per milliliter (col/mL) to 38,000 col/mL over 48 hours of storage at 37 degrees C. Bacterial growth was markedly reduced at cold temperatures (refrigeration) compared with room temperature, with 50% fewer bacterial colonies in 24 hours and 84% fewer colonies in 48 hours. Interestingly, tap water resulted in only minimal growth, especially at cold temperatures (< 100 col/mL at 48 hours). These findings may be useful to increase public awareness and development of guidelines on storage temperature and expiration time for bottled water once it is opened and used.