Carbon and hydrogen isotope effects during sorption of organic contaminants on carbonaceous materials

Stable carbon and hydrogen isotopes can be an efficient means to validate biodegradation of organic contaminants in groundwater since it results in an isotopic fractionation. A prerequisite in applying this method in the field is the proof that other processes decreasing the contaminant concentration are conservative with respect to isotope effects. In this paper we show for carbon isotopes of halogenated hydrocarbon compounds [trichloroethene (TCE), cis-dichloroethene (c-DCE), vinylchloride (VC)] and carbon and hydrogen isotopes of BTEX compounds (benzene, toluene, p-xylene) that no significant fractionation occurs during equilibrium sorption onto activated carbon, lignite coke and lignite. In general, effects were in the range of the reproducibility limit of the analytical instrument (0.5 per thousand for delta13C, and 8 per thousand for delta2H). This observation was made for fractions sorbed of less than 5% to more than 95%. Also for rate-limited sorption of TCE onto activated carbon, no significant fractionation in carbon isotopes could be observed. These findings support the assumption that for these classes of compounds, sorption processes in aquifer systems are conservative with respect to isotope effects.     

Inhibition of sulfide generation in a reclaimed wastewater pipe by nitrate dosage and denitrification kinetics.

Sulfide generation should be avoided during wastewater transportation. The efficiency of nitrate dosing for the inhibition of sulfide generation was evaluated during reclaimed wastewater transport with two nitrate doses, 2.5 and 5 mg/L nitrate-nitrogen (NO3-N). A calcium nitrate [Ca(NO3)2] solution was injected at the beginning of the 61-km-long gravity pipe, which is part of the Reclaimed Wastewater Reuse System of South Tenerife (Spain). During transportation, after dissolved oxygen depletion, a denitrification process took place. With the 5 mg/L NO3-N dose, nitrate was not completely removed at the end of the pipe, whereas with 2.5 mg/L NO3-N, a complete denitrification was achieved. Sulfide generation was completely inhibited with the 5 mg/L dose. However, with 2.5 mg/L, sulfide generation was not completely inhibited but delayed and minimized to a great extent. Denitrification was stoichiometrically limited by the availability in biodegradable matter. An empirical equation enables one to predict the nitrate concentration.     

Tradescantia pallida cv. purpurea boom in the characterization of air pollution by accumulation of trace elements

Tradescantia pallida cv. purpurea, a plant species widely employed for ornamentation in Brazil, has been successfully used for monitoring the genotoxicity of various agents by the micronucleus assay. To amplify knowledge about its suitability as a bioindicator species, its capacity for accumulating trace elements from urban air pollution was evaluated. T. pallida was rooted using standardized soil, and the vases were distributed in two highly polluted sites of the urban area of S?o Paulo, Brazil (Cerqueira Cesar and Congonhas districts), and in one unpolluted control site situated approximately 50 km from downtown S?o Paulo (in Caucaia do Alto). Approximately six months after exposure to pollutants, adult leaves of this plant were collected monthly for 12 months. The leaves were washed with deionized water, dried, and ground for analyses. Characterization of element levels was carried out by neutron activation analysis. Powdered samples and standards were irradiated at the IEA-R1 nuclear reactor for short and long periods, and concentrations of As, Ba, Br, Ca, Ce, Cl, Cr, Co, Fe, K, La, Mn, Na, Rb, Sb, Sc, Sr, Th, and Zn were determined. Analysis of variance applied to the results indicated that samples from polluted sites present the highest concentrations of Ba, Ce, Cr, Co, Fe, La, Sb, and Sc (p < 0.05). Discriminant analysis revealed that it was possible to distinguish the two polluted areas with a precision of 97.5%, based on the amount of pollutant elements measured in the plants at each site. The results indicated the potential use of T. pallida as an accumulator plant for air pollution biomonitoring.     

Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.     

Habitat mapping using machine learning-extended kernel-based reclassification of an Ikonos satellite image

The spatial resolution of satellite imagery suitable for earth resources studies has improved from 80 m (Landsat-MSS, launched in 1972) to 0.6 m (QuickBird, launched in 2001). The conventional pixel-based methods developed for medium resolution satellite images are not suitable for classification of very high spatial resolution images, because the spectral responses of particular habitat classes are much more variable. On the other hand, in the original Barnsley–Barr kernel-based reclassification algorithm not only the spectral information of a pixel but also the textural information in the vicinity of the pixel is used when the pixel labeling decision is made. The first step of the kernel reclassification algorithm is to perform an initial classification of the original image. In the second step, the adjacency-event matrices are computed for each pixel according to co-occurrence frequencies of the initial classes in the kernel window. The degree of matching between an adjacency-event matrix corresponding to specific pixel and the set of class-specific template matrices produced during training is the criterion for pixel re-labeling. We extend the original kernel-based reclassification algorithm with a decision tree-based reclassification, simultaneously taking into account the class-specific similarity images, which are a side-product of the original algorithm. The advantage of decision tree-extended approach over the original approach seems to be the ability of the former to consider more input information, thus increasing the Kappa classification accuracy for an Ikonos image of our study area from 0.56 to 0.60, using a nomenclature containing 10 habitat classes.     

Pollutant dispersion in wetland systems: Mathematical modelling and numerical simulation

In this paper we present and justify an original use of a diffusive-advective partial differential equation model, its discretization procedures and resulting numerical simulations for the dispersal of pollutants in an air–water system, with distinct behaviours in water and in air. The authors believe that the relevance of the developed work lies in its potential use in practical environmental assessment processes for the definition of both preventive and clean-up strategies.     

Landslides into reservoirs and their impacts on banks

Mass wasting processes, like slope failures, on the margins of dam reservoirs, lakes, bays and oceans may generate large water waves that can produce disasters due to flooding over the banks, run up along the shoreline and overtopping dam crests. Therefore, the study of slope failures, the subsequent generation of impulse waves and their consequences are of paramount importance for safety. In this paper the generation and propagation of water waves in reservoirs induced by landslides and their impact on banks were investigated by means of a laboratory study carried out at University of Coimbra wave channel, in a flume measuring 12.0 m  ×  1.5 m  ×  1.0 m (L  ×  H  ×  W), where two banks with variable slope were placed. The study considered the sliding of calcareous blocks over a sliding slope bank into the reservoir, the generation of impulse waves, their propagation in the reservoir and their impact on the downstream bank. A number of waves were generated by different fallings of calcareous blocks, considering different volumes, sliding slopes, initial positions and reservoir depths. All fallings were recorded by video-camera and the results were processed afterwards to obtain the time history of the falling. The water surface variations due to transient waves were measured at five gauges placed between the banks. The waves overtopping and breaking on the downstream bank were also filmed using a video camera, and the hydrodynamic forces on this bank were also measured using four pressure transducers.     

A simple voltammetric procedure for speciation and evaluation of As removal from water

Here, we show a fast and sensitive method for the determination of inorganic arsenic in natural waters using differential pulse cathodic stripping voltammetry. All the arsenite determinations were done in 2.0 mol L⁻¹ HCl + 3.15 × 10⁻⁴ mol L⁻¹ Cu(II) supporting electrolyte. 1 × 10⁻³ mol L⁻¹ sodium thiosulphate was used as As(V) reducing agent. The detection limit was 0.5 μg L⁻¹ for both species. The method has been applied to water samples collected in an arsenic-contaminated region of Brazil, in particular, to verify the efficiency of the solar oxidation and removal of arsenic process applied to these waters.     

Chlorinated components in lime used in production contaminated citrus pulp pellets from Brazil

In order to further understand the contamination of the citrus pulp pellets (CPP) that were exported to Europe in 1997 we examined both contaminated lime and CPP samples for the distribution of polychlorinated biphenyls (PCBs) and chlorinated benzenes (tri–hexa). Standard isotope dilution techniques were applied for all samples, which were analysed by selected ion monitoring high resolution GC–MS. Lime that is used in the production of CPP product is highly contaminated with PCBs and chlorobenzenes.     

Polymorphism in soft coral larvae revealed by amplified fragment-length polymorphism (AFLP) markers

The dioecious Red Sea soft coral Parerythropodium fulvum fulvum breeds its nonsymbiotic planula larvae on the surface of female colonies for less than a week. After completing their development, larvae crawl and settle near maternal colonies. Here we study the genetic polymorphism of developing larvae by the use of amplified fragment-length polymorphism markers. Four reproductive colonies from shallow water populations (two from a dense population and two from a less densely populated area 100 m away) were chosen, and ten larvae were randomly collected from each colony. DNA was analyzed by using three different primer combinations producing 61, 63, 63 polymorphic markers, respectively. All larvae exhibited different banding patterns from one another, illustrating the prominent role of sexual reproduction for the production of larvae. Nei's mean genetic distances for all 12 possible pair-wise combinations for larval origins revealed, in most cases, that sister larvae are genetically closer than larvae from different colonies and that larvae may be grouped into three statistical clusters in accordance with colony origin and population studied. The usefulness of molecular methodologies in coral population genetics is discussed. Received: 26 March 1999 / Accepted: 19 October 1999