Development and evaluation of a mass spectrometer-based continuous emission monitor for volatile organic compound emissions from combustion devices

A mass spectrometer-based continuous emission monitor (MS-CEM) for organic compound emissions from combustion devices was developed and evaluated at the Louisiana State University (LSU) pilot-scale rotary kiln incinerator (RKI). The MS-CEM consists of a stack probe, heat-traced sampling line, vacuum pump, particulate filter, Nafion@ dryer and mass spectrometer. The mass spectrometer includes a computer that controls and optimizes the operation of the unit. The MS-CEM is capable of continuously analyzing up to 40 different volatile organic compounds on a real-time basis. The MS-CEM is capable of analyzing, computing and recording the analytical results for each and up to 40 different organic compounds in less than 0.3 s. Four different volatile organic compounds were mixed together and injected into the baghouse inlet while simultaneously analyzing each organic component exiting the RKI stack gas. The results obtained from MS-CEM were compared with the material balance values. The system response time (including the MS-CEM) varies from 1.1 to 1.5 min.     

Waste plastics recycling process using coke ovens

The Japan Iron and Steel Federation (JISF), as its voluntary energy-saving action plan, proposed a 10% energy reduction by 2010 with 1990 as the basis. Further, it has suggested an additional 1.5% energy saving by the use of waste plastics as a metallurgical raw material. The amount of processing of waste plastics which corresponds to this amount of energy conversion is about 1 million t scale during 1 year. Conventional known methods for recycle-processing of waste plastics include, for example, the method of injection into a blast furnace to use waste plastics as an iron-ore reducing agent instead of coal. On the other hand, the coking process is considered to be suitable as a waste plastic recycling facility because the process involves coal carbonization in a high-temperature and reducing atmosphere. Carbonization tests with mixed waste plastics were conducted with laboratory equipment and in actual coke ovens. As a result, it was confirmed that the waste plastics recycling process using coke ovens is feasible. Therefore, a waste plastics recycling process using coke ovens was started as a chemical recycling technology at Nippon Steel.     

Development of plastic disks containing flame retardants for elucidating changes in their concentrations due to simulated weathering and the application of these disks to weathering tests

Flame retardants (FRs) are useful because they can prevent combustion and delay the spread of fire after the ignition on commercial products containing plastics. However, such commercial products could be a primary source of environmental contamination with FRs. Plastic disks containing FRs were prepared to elucidate changes in the concentrations of the FRs after weathering tests. Acrylonitrile-butadiene-styrene (ABS) and polycarbonate (PC) resin were separately kneaded with a combination of three organic FRs [Dechlorane plus (DP), tetrabromobisphenol A (TBBPA), and triphenyl phosphate (TPhP)] and one inorganic FR [antimony trioxide (Sb₂O₃)]. The concentrations of TBBPA/TPhP and DP/Sb₂O₃ in the final preparations were respectively 1000 and 500 mg/kg in compliance with the RoHS directive on organobromine FR. The concentrations of elements in the final preparations were 300 mg/kg for chlorine, 600 mg/kg for bromine, 100 mg/kg for phosphorus, and 400 mg/kg for antimony, respectively. The analytical concentrations (three FRs and four elements) were consistent with the expected concentrations (maximum difference ?9.5% in the PC disks). The FRs and elements in the disks were sufficiently homogenous (maximum inhomogeneity 4.3% in the PC disks). The prepared disks were subjected to weathering tests; the concentrations of TBBPA in the disks decreased significantly (30 to 40%) whereas the concentrations of the elements did not change under the condition of this study. On the other hand, there were no drastic differences on relationships of FRs and elements such as DP/chlorine and TPhP/phosphorus.     

Safety management by use of laser mass spectrometry of polychlorinated biphenyls (PCBs) in the processed gas and work environment of a PCB disposal plant

This study demonstrates the applicability of laser mass spectrometry for safety management of the processed gas and the work environment in a polychlorinated biphenyl (PCB) disposal plant. By utilization of laser ionization/ion trapping storage/time-of-flight mass spectrometry (LI-IT-TOFMS), we analyzed gaseous PCBs from scrap capacitors with on-line detection. It was confirmed that few contaminants were detected in the spectrum. By the effect of laser-induced selective ionization, it was considered that there was little interference with the mass range of PCBs. The accuracy of LI-IT-TOFMS when analyzing environmental gas was almost the same as that for the PCB standard gas. It was possible to perform on-line analysis of the work environment for over 2000 h (120 000 data points). LI-IT-TOFMS was thus shown to be a very useful method for ensuring the safety of the work environment in disposal plants for PCBs.     

Preparation and Use of Spatially and Temporally Resolved Emission Inventories in the San Francisco Bay Region

Three regional agencies recently prepared an Air Quality Maintenance Plan for the San Francisco Bay Area oxidant problem. An Eulerian, photochemical model, LIRAQ, provided the technical basis for the plan recommendations. A major LIRAQ input is an emission inventory accurately resolved to one kilometer and one hour increments. The cooperating agencies prepared such inventories, covering 20,000 sq km, for one base and two future years. Several manual and computer-assisted techniques were developed to utilize a variety of independent data bases. Population, land use, employment and transportation data were oganized into a common system of coordinates and units to produce the needed spatial input. Estimates of hourly variation were made by source category based on production rates, fuel use, traffic patterns, flight schedules, and other factors. The result was a series of consistent, detailed inventories which provide a powerful air quality modeling and planning tool. The detail is attained at considerable expense, but the cost is easily justifiable when compared to implementation costs for control strategies.     

Evaluating waste disposal systems

Waste disposal systems conventionally exhibit many problems, such as difficulties in finding final disposal sites for incinerator residues and the issue of how to recycle waste materials. Some new technologies have been developed to solve such problems, including ash melting and gasification melting. Furthermore, to improve the power generation efficiency of waste treatment facilities so that their energy is used more efficiently, combined stoker/gas turbine power generation (super waste power generation) technology has been developed. Through examination of two cases in this study, environmental impacts and costs were determined using lifecycle assessment (LCA) and lifecycle cost (LCC) methods in a model city. In case 1, a stoker furnace was compared to a combined stoker/gas turbine system. In case 2, a stoker furnace plus ash melting system was compared to a gasification melting system. The results demonstrate that the stoker furnace has a lower environmental impact than the combined stoker/gas turbine system in case 1, and that the stoker plus ash melting system costs less than the gasification melting system in case 2, but both systems had strong impacts on the environment.     

Discriminatory tax and subsidy on environmental behaviors

Environmental Economics and Policy Studies - This paper investigates the consumption tax and subsidy as an environmental policy instrument for environmentally aware consumers by applying the model...