Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea

The present end-of-life vehicle (ELV) recycle rate and management status during the dismantling stage were investigated to aid the establishment of policies for the management of ELVs by surveying information and using the results gained from questionnaires given to dismantlers. The average recycle rate at the dismantling stage was 44% of the mass of a new vehicle and the rest of the ELV was then compressed and transported to shredding companies to recover mainly the iron content, which averaged 38.7% of the mass of a new vehicle. Nonferrous metals such as copper, antimony, zinc, and aluminum accounted for only 1.5%. The automobile shredder residues (ASRs) were composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. The dumping of fluff and inorganic residues in landfill sites, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car, as has been done in European countries and in Japan. The detailed characteristics of ASR were investigated to suggest appropriate means of treatment such as volume reduction or the utilization of thermal technologies to meet future expected enforcement. Also, some concerns on hazardous pollutant release such as that of dioxins while utilizing such thermal treatment methods were considered. The present on-going research and development projects to meet such future management targets are also introduced.     

Characterization of aromatic hydrocarbon formation from pyrolysis of polyethylene-polystyrene mixtures

Design and operating parameters, and cause and effect relationships among feedstocks and products in the pyrolysis of waste polymers are needed if this method of processing is to be used for energy recovery from waste plastics. The purpose of this study was to quantify the effect of various operating factors for the pyrolysis of common polymeric wastes. Experiments were performed using a conventional retort tube as a batch reactor. The operating factors considered were temperature and reaction time at constant heating rate. High density polyethylene (PE) and polystyrene (PS), the most common plastic waste in Korea, were used singly and in mixture.The pyrolysis time for maximum oil production from a PE-PS mixture was shorter than in the case of PE alone, showing an enhancement effect from the PS. The maximum gas production time from PE-PS mixtures was shorter than for PE alone at 500° C; above 600° C, this does not occur. Small aromatic compounds (which can be valuable) are produced at maximum with an 1:1 mixture of PE and PS at 600° C, showing the possibility of process control for the maximum recovery of desirable pyrolysis products. The maximum yield of toluene, xylene, styrene, and 1-propenyl benzene were 8.6, 8.9, 51.0 and 7.4 wt.% of feed for pyrolysis PS at 700° C, respectively. For naphthalene, it was at 700° C with 1:1 PE:PS (by wt.). The maximum recovery was 1.3 wt.%. Diels-Alder theory can explain the formation of aromatic compounds in the pyrolysis products. The yield of these secondary pyrolysis products can be controlled by reaction time, pyrolysis temperature and mixing ratio of plastic wastes in the pyrolysis feed.     

Recycling of cathode ray tube panel glasses as aggregates of concrete blocks and clay bricks

While the cathode ray tube (CRT) funnel containing lead could be transported to a smelting facility to recover lead, which could be an available option in domestic, a proper technology to recycle a CRT panel must be developed. Thus, it was suggested that CRT panel glass be used as aggregates of concrete blocks and clay bricks. Samples of blocks and bricks were fabricated with CRT powders and tested to measure their strength and absorption rate to determine their qualities, and environmental soundness was determined by measuring the leaching rate of hazardous metals. For concrete blocks, CRT panel glass powders incorporated as aggregates up to 40 % replacing stone powder was proposed as the proper condition for manufacturing blocks. Around 2 % of CRT panel incorporated into clay brick to substitute Kaoline was suggested to fabricate the best quality of clay brick. Results of leaching test met the criteria with much less concentration of hazardous metals, even lead compound containing in the CRT funnel. To conclude, the use of CRT panel powder after crushing it to the proper size as an aggregate of concrete blocks or clay bricks could be one of the appropriate alternatives to recycle for CRT glass waste being generated drastically in a short term.     

The role of affective experience in work motivation: Test of a conceptual model

The purpose of this paper was to contribute to understanding of the crucial role of emotion in work motivation by testing a conceptual model developed by Seo, Barrett, and Bartunek (2004) that predicted the impacts of core affect on three behavioral outcomes of work motivation, generative-defensive orientation, effort, and persistence. We tested the model using an Internet-based investment simulation combined with an experience sampling procedure. Consistent with the predictions of the model, pleasantness was positively related to all three of the predicted indices. For the most part, these effects occurred indirectly via its relationships with expectancy, valence, and progress judgment components. Also as predicted by the model, activation was directly and positively related to effort.     

Nationwide survey on the natural radionuclides in industrial raw minerals in South Korea

A Nationwide survey on the natural radioactivity in industrial raw mineral commodities (17 kinds of domestic and 18 kinds of imported) that are representative minerals used in production and consumption in South Korea was conducted. The target industrial minerals can be categorized into two groups. The first group covers non-metallic and metallic raw minerals with low levels of radioactivity such as clay, silica sand, carbonates, bituminous and anthracite coal, iron ores, ilmenite, rutile, and phosphate ore. The other group comprises minerals with high levels of radioactivity including zircon and monazite. One hundred and sixty-four domestic and imported samples were analysed by gamma-ray spectroscopy using an HPGe detector. The (40)K content ranges from <0.00131 to 2.69Bq g(-1), and (226)Ra and (232)Th range over <0.0006 to 0.630 and <0.0008 to 0.474Bq g(-1), respectively. There was no anthropogenic radioactive signal in any of the samples.     

Assessing the Removal Efficiency of Murine Norovirus 1, Hepatitis A Virus,and Human Coronavirus 229E on Dish Surfaces Through General Wash Program of Household Dishwasher

Food and Environmental Virology - The performance of dishwashers in removing live viruses is an important informative value in practical applications. Since foodborne viruses are present in...     

Estrogenic effects of phenolic compounds on glucose-6-phosphate dehydrogenase in MCF-7 cells and uterine glutathione peroxidase in rats

In this study, we tested phenolic compounds such as bisphenol A (BPA), 4-nonylphenol (NP), 4-octylphenol (OP) and 4-propylphenol (PP) by using glucose-6-phosphate dehydrogenase (G6PD) in estrogen sensitive human breast cancer cells (MCF-7 cells) and glutathione peroxidase (GPx) in female immature Sprague-Dawley (SD) rats. This study was designed to investigate whether phenolic compounds have estrogenic effects in these useful screening methods for endocrine disruptors. We chose 6 h as the incubation period for the G6PD assay through a preliminary experiment using 17beta-estradiol (E2). Above the concentration of 1 x 10(-8) M, BPA significantly increased the G6PD activity in a concentration-dependent manner, relative to the control. NP (over the concentration of 1 x 10(-9) M) also enhanced the G6PD activity by about 1.8 times that of the control. OP produced weaker effects on G6PD than NP, and showed a tendency to increase the G6PD activity. PP did not affect the G6PD activity. These results show that BPA and NP have the effect of enhancing G6PD activities in MCF-7 cells. In the in vivo GPx assay, both BPA and E2 significantly increased the uterus wet weights and dramatically enhanced uterine GPx activities in immature female rats in a dose-dependent manner. Treatment with NP (500 mg/kg/day) increased significantly both the uterine GPx activity and the uterus wet weights in immature female rats. OP (500 mg/kg/day) also caused a significant increase in uterine GPx activity, but had no effect on the uterus wet weights. This finding indicates that the change in uterine GPx activities could be a more sensitive parameter than that of uterus wet weights in immature rats. This study implies that phenolic compounds have a weak estrogenic effects.     

Application of real option analysis for planning under climate change uncertainty: a case study for evaluation of flood mitigation plans in Korea

With concerns regarding global climate change increasing, recent studies on adapting to nonstationary climate change recommended a different planning strategy that could spread risks. Uncertainty in global climate change should be considered in any decision-making processes for flood mitigation strategies, especially in areas within a monsoon climate regime. This study applied a novel planning method called real option analysis (ROA) to an important water resources planning practice in Korea. The proposed method can easily be applied to other watersheds that are threatened by flood risk under climate change. ROA offers flexibility for decision-makers to reflect uncertainty at every stage during the project planning period. We successfully implemented ROA using a binomial tree model, including two real options—delay and abandon—to evaluate flood mitigation alternatives for the Yeongsan River Basin in Korea. The priority ranking of the four alternatives between the traditional discount cash flow (DCF) and ROA remained the same; however, two alternatives that were assessed as economically infeasible using DCF, were economically feasible using ROA. The binomial decision trees generated in this study are expected to be informative for decision-makers to conceptualize their adaptive planning procedure.     

Anthropogenic mercury emission inventory with emission factors and total emission in Korea

Mercury emissions concentrations, emission factors, and the total national emission from major anthropogenic sources in Korea for the year 2007 were estimated. Uncontrolled and controlled mercury emission factors and the total emission from each source types are presented. The annual national mercury emission from major anthropogenic sources for the year 2007, on average was 12.8 ton which ranged from 6.5 to 20.2 ton. Averaged emissions of elemental, oxidized, and particulate mercury were estimated at 8.25 ton, 3.69 ton, and 0.87 ton, respectively. Due to the removal of a major portion of particulate and oxidized mercury species, elemental mercury was dominant in stack emission. About 54.8% of mercury emission was contributed by industrial sources, 45.0% by stationary combustion sources and 0.02% by mobile sources. Thermal power plants, oil refineries, cement kilns and incinerators (municipal, industrial, medical, sewage sludge) were the major mercury emitters, contributing about 26%, 25%, 21% and 20%, respectively to the total mercury emission. Other sources (crematory, pulp and paper manufacturing, nonferrous metals manufacturing, glass manufacturing) contributed about 8% of the total emission. Priority should be given in controlling mercury emissions from coal-fired power plants, oil refineries, cement kilns and waste incinerators. More measurements including natural and re-emission sources are to be carried out in the future in order to have a clear scenario of mercury emission from the country and to apply effective control measures.