Dechlorination and destruction of PCDDs/PCDFs in fly ashes from municipal solid waste incinerators by low temperature thermal treatment

Dechlorination and destruction characteristics of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs) in fly ashes from commercial-scale municipal solid waste incinerators by low temperature thermal treatment using a laboratory-scale heating system were investigated. Experiments were carried out in reducing atmosphere at temperatures of 300 degrees C, 450 degrees C and 600 degrees C respectively, for the treatment time of 1h and 3h. Concentrations of PCDDs/PCDFs in raw fly ashes ranged from 35.5 to 107.3 microg kg(-1) (1.5-3.4 microg TEQ kg(-1)) and treated fly ashes ranged from 0.34 to 45.3 microg kg(-1) (0.012-1.63 microg TEQ kg(-1)). Concentrations of PCDDs/PCDFs in fly ashes treated at the different temperatures and times were observed to decrease with increase of treatment temperature and time by dechlorination or destruction. The distribution of octa- and hepta-chlorinated congeners were decreased and tetra-, penta- and hexa-chlorinated congeners were increased at 300 degrees C and 450 degrees C, but the distribution of octa- and hepta-chlorinated congeners were increased and tetra-, penta- and hexa-chlorinated congeners were again decreased at 600 degrees C. Total destruction efficiencies of PCDDs/PCDFs in fly ashes showed above 95% at the treatment temperature of 450 degrees C for 3h. However, removal efficiency of each congener in fly ashes varied, especially, 2,3,7,8-TeCDD and 1,2,3,7,8-PeCDD in fly ash A increased. And the dechlorination and destruction characteristics of PCDDs/PCDFs in fly ash A and B was different due to difference in contents of Ca-compounds and metal oxides such as CuO and PbO in fly ashes.     

The application and development of country-specific parameters for accurate estimations of methane emissions from solid-waste disposal sites

To identify the application and development of country-specific parameters for methane emission estimations from solid-waste disposal sites, National Inventory Reports of 41 Annex I countries and National Communications of ten non-Annex I countries of the United Nations Framework Convention on Climate Change were analyzed. A first-order decay method was applied to 38 out of 41 Annex I countries and to five out of ten non-Annex I countries in national GHG inventory submissions up to 2012. Country-specific parameters were approximately 26 % of the total number of parameters used in the 38 Annex I countries and were mostly developed for degradable organic carbon and reaction constants that cover certain waste compositions. The UNFCCC encourages countries to develop more country-specific parameters reflecting the distinct characteristics of each country in which solid-waste disposal site is a key source. Depending on a country’s condition, a stepwise approach regarding the development of country-specific parameters needs to be done so as to improve the accuracy of methane emission estimates in the solid-waste disposal site category.     

Thermoeconomic installation limit of PV/WT hybrid energy systems for Off-grid islands

An ideal off-grid island can become 100% energy-sufficient if one installs renewable energy systems such as solar photovoltaic (PV) and wind turbine (WT) systems. However, the intermittent and uncertain nature of the power supply from renewable energy systems hinders a 100% autonomy level (AL) without an infinite energy storage capacity. The thermoeconomic installation limit (TEIL) of a PV/WT hybrid energy system was studied using hourly weather data and the energy demand profile for off-grid islands. An appropriate battery size for the TEIL was also determined. Given the current installation cost of the hybrid energy system and the battery unit, the AL for a PV/WT hybrid energy system at the TEIL is calculated to be approximately 70%. Above the limit, the size of the energy storage unit and, correspondingly, the total annual cost of the PV/WT hybrid energy system increase sharply.     

Characteristics of odorous carbonyl compounds in the ambient air around a fishery industrial complex of Yeosu, Korea

In this study,the amounts of odorous carbonyl compounds(OCCs) including acetaldehyde(Acet-A),propionaldehyde(Pron-A),butylaldehyde(Buty-A),iso-valeric aldehyde(Iso-Vale-A) and n-valeric aldehyde(N-Vale-A) emitted from a fishery industrial complex near the exhibition facilities of "Expo 2012 Yeosu Korea" were measured.Acet-A was found to be the most abundant OCC,and the total concentrations of the OCCs were the highest in the summer.However,due to vehicular exhaust and photochemical reactions,the concentrations of some of the OCCs presented their highest levels in the fall.A significant correlation between Acet-A and Buty-A was found at the major fishery facilities(r = 0.816,p = 1.87E-15,n = 60) and at the border areas(r = 0.809,p = 3.40E-12,n = 48) of this fishery industrial complex.The concentrations of OCCs at the border areas were not worse than those at the urban areas in other places,indicating that the concentrations of ambient OCCs at the border areas were not greatly influenced by manmade activities.     

Performance evaluation of six different aerosol samplers in a particulate matter generation chamber

The present study was carried out with the aim of evaluating the performance of six different aerosol samplers in terms of mass concentration, particle size distribution, and mass fraction for the international size-sampling conventions. The international size-sampling criteria were defined as inhalable, thoracic, and respirable mass fractions with 50% cutoff at an aerodynamic equivalent diameter of 100 μm, 10 μm, and 4 μm, respectively. Two Andersen, four total suspended particulate (TSP), two RespiCon, four PM₁₀, two DustTrak, and two SidePak samplers were selected and tested to quantitatively estimate human exposure in a carefully controlled particulate matter (PM) test chamber. The overall results indicate that (1) Andersen samplers underestimate total suspended PM and overestimate thoracic and respirable PM due to particle bounce and carryover between stages, (2) TSP samplers provide total suspended PM as reference samplers, (3) TSP samplers quantified by a coulter counter multisizer provide no information below an equivalent spherical diameter of 2 μm and therefore underestimate respirable PM, (4) RespiCon samplers are free from particle bounce as inhalable samplers but underestimate total suspended PM, (5) PM₁₀ samplers overestimate thoracic PM, and (6) DustTrak and SidePak samplers provide relative PM concentrations instead of absolute PM concentrations.     

Eutectic mixture promoted CO2 sorption on MgO-TiO2 composite at elevated temperature

The development of carbon dioxide(CO_2) sorbents that can operate at elevated temperatures is significant for the advancement of pre-combustion capture technologies.Recently, promoter-based systems composed of alkali/alkaline earth metal nitrates and/or carbonates have been considered as next-generation solid sorbents due to their improved CO_2 uptake and kinetics. However, obtaining stable MgO sorbents against temperature swing regeneration still remained challenging. Herein, we report MgO-TiO_2 solid sorbents promoted by eutectic mixture(KNO_3 and LiNO_3) for elevated temperature CO_2 sorption. The developed sorbents show improved CO_2 sorption capacity, which may be attributed to the alternative CO_2 sorption pathway provided by the ionization of highly dispersed MgO in the eutectic mixture. The MgO-TiO_2 framework was also shown to assist in retaining the MgO configuration by constraining its interaction with CO_2. Furthermore, it is demonstrated that constructing composite structures is essential to improve the CO_2 sorption characteristics,mainly recyclability, at elevated temperatures. The developed promoter integrated sorbents showed exceptionally high CO_2 sorption capacity of 30 wt.% at an elevated temperature(300°C) with pronounced stability under temperature swing operation.     

Human Enteric Viruses in Groundwater

Waterborne outbreaks of enteric viruses are a major public health concern. The present study has been carried out to assess the presence of enteric viruses responsible for human acute gastroenteritis (AGE) in groundwater intended for drinking and produce washing. In total, 62 samples from groundwater for drinking and produce washing collected from Dec 2007 to Dec 2008 in Seoul were tested for enteric viruses using conventional RT–PCR, ELISA, and real-time RT–PCR. Our results showed that enteric viruses were detected in 7 (8.8%) groundwater samples. Rotaviruses were detected in 3 (4.8%) of the samples by ELISA; human adenoviruses were detected in 2 (3.2%) of the samples by ELISA; and nested RT–PCR detected noroviruses in 2 (3.2%) of the samples. In one of the groundwater sample, the norovirus RNA was detected by conventional RT–PCR which was confirmed positive by real-time RT–PCR. Additionally, real-time RT–PCR successfully detected norovirus RNA in five out of 62 water samples (8.1%). The data demonstrate that real-time RT–PCR will be useful as a rapid and sensitive method for detecting norovirus in water samples. Phylogenetic analysis revealed that the noroviruses detected in two of the groundwater samples belonged to GII-4. These studies can provide important information for the prevalence of enteric viruses in Korean groundwater.     

Characteristics of gas and residues produced from electric arc pyrolysis of waste lubricating oil

An attempted has been made to recover high-calorific fuel gas and useful carbonaceous residue by the electric arc pyrolysis of waste lubricating oil. The characteristics of gas and residues produced from electric arc pyrolysis of waste lubricating oil were investigated in this study. The produced gas was mainly composed of hydrogen (35–40%), acetylene (13–20%), ethylene (3–4%) and other hydrocarbons, whereas the concentration of CO was very low. Calorific values of gas ranged from 11,000 to 13,000 kcal kg^?1 and the concentrations of toxic gases, such as NO_x, HCl and HF, were below the regulatory emissions limit. Gas chromatography–mass spectrometry (GC/MS) analysis of liquid-phase residues showed that high molecular-weight hydrocarbons in waste lubricating oil were pyrolyzed into low molecular-weight hydrocarbons and hydrogen. Dehydrogenation was found to be the main pyrolysis mechanism due to the high reaction temperature induced by electric arc. The average particle size of soot as carbonaceous residue was about 10 μm. The carbon content and heavy metals in soot were above 60% and below 0.01 ppm, respectively. The utilization of soot as industrial material resources such as carbon black seems to be feasible after refining and grinding.