Removal of pyrene and benzo(a)pyrene from contaminated water by sequential and simultaneous ozonation and biotreatment.

The removal of pyrene and benzo(a)pyrene from contaminated water by sequential and simultaneous ozonation-bioremediation techniques was investigated. During the sequential treatment, ozonation using 0.5 or 2.5 mg/L ozone was used as a pretreatment process, whereas, during the simultaneous treatment process, ozonation of hydrocarbon-contaminated water at a predetermined duration using 0.5 mg/L ozone was made in the presence of microbial biomass. Ozonation was not beneficial for the removal of pyrene. However, despite a decreased specific biodegradation rate, ozonation improved the overall elimination of benzo(a)pyrene during both treatment processes. The overall removal of benzo(a)pyrene increased from 23 to 91% after exposure of the water to 0.5 mg/L ozone for 30 minutes during the simultaneous treatment process and further to 100% following exposure to 2.5 mg/L ozone for 60 minutes during the sequential treatment mode, demonstrating the benefits of combined ozonation-biological treatment for the removal of polycyclic aromatic hydrocarbons.     

Preconception and preimplantation diagnosis for cystic fibrosis

Preimplantation diagnosis provides couples at high genetic risk the possibility of avoiding genetic disease without the need for prenatal diagnosis and selective abortion of the affected pregnancy. Following extensive background work on the reliability of genetic diagnosis in a single cell, we offered on a research basis preimplantation diagnosis to five couples at risk for offspring with the delta-F508 mutation (the major mutation causing cystic fibrosis). There was no detrimental effect from polar body removal on either fertilization or preimplantation development. Genetic analysis, undertaken in 22 polar bodies and 15 corresponding blastomeres, identified 21 embryos of which ten were transferred.     

Fetal intestinal microvilli in human amniotic fluid

The intestinal microvilli of fetal origin in human amniotic fluid were purified by Ca²⁺ precipitation of contaminating organelles followed by differential centrifugation of microvillar membranes. In the purified preparation, the specific activity of the microvillar marker-enzymes maltase and sucrase increased about 77-fold over that in cell-free amniotic fluid. Significant contamination of the purified preparation by endoplasmic reticulum (microsomes) and lysosomes was ruled out on the basis of a low content of the marker enzymes glucose-6-phosphatase (microsomes) and acid phosphatase (lysosomes). Amniotic fluid microvilli contain typical enzymes of the fetal intestine including maltase, sucrase, trehalase, alkaline phosphatase and γ-glutamyltransferase, and their morphology by electron microscopy resembles that of vesiculated intestinal microvilli. Prenatal detection of genetic diseases due to a deficiency of a protein expressed in these membranes or associated to abnormal microvilli seems feasible.     

Fertile diploid males in the ant Cataglyphis cursor: a potential cost of thelytoky?

Under the hymenopteran single-locus complementary sex-determination system, production of diploid males results from homozygosity at the sex-determiner locus. This arises when both parents transmit identical alleles at the locus to the offspring. In species reproducing asexually through thelytokous parthenogenesis, production of diploid males may also occur when the sex locus undergoes recombination and becomes homozygous in the offspring. Diploid males represent a substantial genetic load in hymenopteran populations because they often produce unviable sperm or sire sterile triploid female offspring. In the Mediterranean ant Cataglyphis cursor, the queen and workers can produce female offspring through automictic thelytokous parthenogenesis with central fusion, a mode of parthenogenesis that increases homozygosity. We report, for the first time, the presence of about 39 % of colonies producing adult diploid males (seven colonies out of 18). Overall, 8 % of adult males were diploid (12 diploid males out of the 146 males genotyped). Genotyping workers from the seven colonies producing diploid males showed that three diploid males were sons of queens and produced by thelytoky, six were probably sons of workers also produced by thelytoky and three were non-natal. Furthermore, the mating of a diploid male with two virgin queens in the laboratory led to the production of sterile triploid workers, which shows that diploid males in C. cursor are fertile, mate successfully and produce viable and functional but probably sterile female offspring. Because diploid males originate from thelytokous reproduction, they are only produced during sexual production and hence do not impair colony growth, which could explain why they are not removed at early brood stages.     

Induction to oxidative stress by saxitoxin investigated through lipid peroxidation in Neuro 2A cells and Chlamydomonas reinhardtii alga

Saxitoxin (STX) is a cyanotoxin, which can cause neurotoxic effects and induce ecological changes in aquatic environments, a potential risk to public and environmental health. Many studies of cytotoxicity on animal cells and algae have been performed, although few compare the toxic effects between the two models. In this sense, we investigated the oxidative stress induced by STX (0.4-3.0 nM) in two different cellular models: Neuro-2A (N2A) cells and Chlamydomonas reinhardtii alga by quantification of malondialdehyde (MDA) levels as indicative of lipid peroxidation (LPO). Also was evaluated the antioxidant defense of these cells systems after exposure to STX by the addition of antioxidants in N2A cells culture, and by the measure of antioxidants enzymes activity in C. reinhardtii cells. The MDA levels of N2A cells increased from 15% to 113% for 0.4 and 3.0 nM of STX, respectively, as compared to control. Superoxide-dismutase and catalase did not appear to protect the cell from STX effect while, in cells treated with vitamin E, the rates of MDA production decreased significantly, except for higher concentrations of STX. No MDA productions were observed in algal cells however some effects on antioxidant enzymes activity were observed when algae were exposed to 3.0 nM STX. Our results indicate that the concentrations of STX that may induce oxidative stress through LPO are different in animal and phytoplankton communities. A combination of algal and animal bioassays should be conducted for reliable assessment of oxidative stress induced by STX.     

Rapid Assessment of Population Size by Area Sampling in Disaster Situations

In the initial phase of a complex emergency, an immediate population size assessment method, based on area sampling, is vital to provide relief workers with a rapid population estimate in refugee camps. In the past decade, the method has been progressively improved; six examples are presented in this paper and questions raised about its statistical validity as well as important issues for further research. There are two stages. The first is to map the camp by registering all of its co-ordinates. In the second stage, the total camp population is estimated by counting the population living in a limited number of square blocks of known surface area, and by extrapolating average population calculated per block to the total camp surface. In six camps selected in Asia and Africa, between 1992 and 1994, population figures were estimated within one to two days. After measuring all external limits, surfaces were calculated and ranged between 121,300 and 2,770,000 square metres. In five camps, the mean average population per square was obtained using blocks 25 by 25 meters (625 m2), and for another camp with blocks 100 by 100 m2. In three camps, different population density zones were defined. Total camp populations obtained were 16,800 to 113,600. Although this method is a valuable public health tool in emergency situations, it has several limitations. Issues related to population density and number and size of blocks to be selected require further research for the method to be better validated.     

Simultaneous voltammetric determination of four triazine herbicides in water samples with the aid of chemometrics

A novel differential pulse voltammetry (DPV) method was developed for the simultaneous analysis of herbicides in water. A mixture of four herbicides, atrazine, simazine, propazine and terbuthylazine was analyzed simultaneously and the complex, overlapping DPV voltammograms were resolved by several chemometrics methods such as partial least squares (PLS), principal component regression (PCR) and principal component–artificial networks (PC–ANN). The complex profiles of the voltammograms collected from a synthetic set of samples were best resolved with the use of the PC–ANN method, and the best predictions of the concentrations of the analytes were obtained with the PC-ANN model (%RPE_T = 6.1 and average %Recovery = 99.0). The new method was also used for analysis of real samples, and the obtained results were compared well with those from the GC-MS technique. Such conclusions suggest that the novel method is a viable alternative to the other commonly used methods such as GC, HPLC and GC-MS.     

Impact of metal stress on the production of secondary metabolites in <Emphasis Type="Italic">Pteris vittata</Emphasis> L. and associated rhizosphere bacterial communities

Plants adapt to metal stress by modifying their metabolism including the production of secondary metabolites in plant tissues. Such changes may impact the diversity and functions of plant associated microbial communities. Our study aimed to evaluate the influence of metals on the secondary metabolism of plants and the indirect impact on rhizosphere bacterial communities. We then compared the secondary metabolites of the hyperaccumulator Pteris vittata L. collected from a contaminated mining site to a non-contaminated site in Vietnam and identified the discriminant metabolites. Our data showed a significant increase in chlorogenic acid derivatives and A-type procyanidin in plant roots at the contaminated site. We hypothesized that the intensive production of these compounds could be part of the antioxidant defense mechanism in response to metals. In parallel, the structure and diversity of bulk soil and rhizosphere communities was studied using high-throughput sequencing. The results showed strong differences in bacterial composition, characterized by the dominance of Proteobacteria and Nitrospira in the contaminated bulk soil, and the enrichment of some potential human pathogens, i.e., Acinetobacter, Mycobacterium, and Cupriavidus in P. vittata’s rhizosphere at the mining site. Overall, metal pollution modified the production of P. vittata secondary metabolites and altered the diversity and structure of bacterial communities. Further investigations are needed to understand whether the plant recruits specific bacteria to adapt to metal stress.     

Source characterisation of road dust based on chemical and mineralogical composition

Road dust contain potentially toxic pollutants originating from a range of anthropogenic sources common to urban land uses and soil inputs from surrounding areas. The research study analysed the mineralogy and morphology of dust samples from road surfaces from different land uses and background soil samples to characterise the relative source contributions to road dust. The road dust consist primarily of soil derived minerals (60%) with quartz averaging 40-50% and remainder being clay forming minerals of albite, microcline, chlorite and muscovite originating from surrounding soils. About 2% was organic matter primarily originating from plant matter. Potentially toxic pollutants represented about 30% of the build-up. These pollutants consist of brake and tire wear, combustion emissions and fly ash from asphalt. Heavy metals such as Zn, Cu, Pb, Ni, Cr and Cd primarily originate from vehicular traffic while Fe, Al and Mn primarily originate from surrounding soils. The research study confirmed the significant contribution of vehicular traffic to dust deposited on urban road surfaces.