Environmental and lifestyle factors affect benzene uptake biomonitoring of residents near a petrochemical plant

Background

We monitored urinary benzene excretion to examine factors affecting benzene uptake in a sample of the general population living near a petrochemical plant.

Methods

Our study population included 143 subjects: 33 petrochemical plant workers (W) with low level occupational benzene exposure; 30 residents in a small town 2 km from the plant (2kmR); 26 residents in a second small town located 2 to 4 km from the plant (4kmR); and 54 urban residents 25 km from the plant (25kmR). Exposure to benzene was evaluated by personal air sampling during one work-shift for the W group, and from 8.00 to 20:00 for general population subgroups, and by urinary benzene (BEN-U).

Results

Median airborne benzene exposure was 25, 9, 7 and 6 μg/m³ benzene among the W, 2kmR, 4kmR, and 25kmR subgroups, respectively; the highest level was found among the workers, while there was no significant difference among the other groups. Median BEN-U was 2 to 14-fold higher in smokers compared to non-smokers; among non-smokers BEN-U was the highest in W (median 236 ng/L), and lower in the 2kmR (48 ng/L) and 4kmR (63 ng/L) subgroups than in the 25kmR (120 ng/L) subgroup. A multiple linear regression analysis, explaining up to 73% of BEN-U variability, confirmed that active smoking and airborne benzene most strongly affected BEN-U. Among the non-smoking, non-occupationally exposed study subjects, a positive association was found between BEN-U and the distance of residence from the plant. This association was explained by increased exposure to urban traffic emissions in the study group residing at a greater distance from the plant. Environmental tobacco smoke had a marginally positive role.

Conclusion

Among factors affecting benzene uptake in non-occupationally exposed individuals, urban residence contributes to benzene exposure more than residing in close proximity to a petrochemical plant.     

Determination of Sulfur Oxides in the Flue Gases of the Pulping Processes

The body of information presented in this paper is directed to the operating personnel and process engineers employed in the power and recovery departments of a chemical pulping operation. The proper evaluation of the total analytical and sampling system (TASS), to be used in the determination of sulfur oxides is as important as a proper analytical and recording system (ARS). The presence of other sulfur gaseous compounds and particulates could greatly influence the results of the determination.

The analytical method employed determines sulfur dioxide and trioxide from an aliquot of the trapping solution, 3% hydrogen peroxide and 8 0% isopropyl alcohol respectively. The aliquot is titrated with barium perchlorate in the presence of Thorin indicator. The results of evaluating the method indicated negligible interference from the presence of hydrogen sulfide, mercaptans and nitrogen oxides. A blank correction of 15 parts per million (ppm) is recommended whenever 100 ppm of hydrogen sulfide or more are simultaneously present in the gas stream. Particulaies are shown to interfere either by addition or subtraction. Sulfate particulates that will add to the determination must be removed, but in doing so, care must be exerted to avoid surface-contacting conditions that promote reaction between carbonates and the sulfur oxides. The integrated method of sampling and analysis will permit determinations from a flue gas with sulfur oxides concentrations of 30 ppm and above. The relative standard deviation improves from 10% at 100 ppm SO₂ to 2.6% at 1000 ppm SO₂. In both cases, sulfides were present.     

Error propagation in pesticide residue measurements estimated by computational simulations and inter-laboratory sample analysis

An assessment of the error associated with conventional pesticide residue analysis has been conducted based on computer simulations and inter-laboratory residue analysis. Computational simulations were conducted based on (i) typical performance and regulatory acceptance criteria of analytical methods, and (ii) field residue distributions. In addition, field samples with incurred residues were sent to different private laboratories and the results compared. The relative difference in pesticide residues obtained when samples from the same field or produce lot are analyzed at separate laboratories was used to quantify the uncertainty associated with residue analyses performed using common analytical technology, and methods that are in compliance with current regulatory requirements. The study showed that differences of > 100% are common and should be expected when samples from the same crop are analyzed at different laboratories. The results also suggest that the error within residue measurements can be particularly detrimental when a result is reported near the maximum residue limit (MRL).     

The Recovery of Ammonia and Hydrogen Sulflde from Ground-Level Area Sources Using Dynamic Isolation Flux Chambers: Bench-Scale Studies

Abstract

Controlled bench-scale laboratory experiments were conducted to evaluate the recovery of ammonia (NH₃) and hydrogen sulflde (H₂S) from dynamic isolation flux chambers. H₂S (80–4000 ppb) and NH₃ (5000–40,000 ppb) samples were diffused through the flux chamber to simulate ground level area source emissions while measuring the inlet and outlet flux chamber concentrations simultaneously. Results showed that the recovery of H₂S during a 30-min sampling time was almost complete for concentrations >2000 ppb. At the lowest concentration of 80 ppb, 92.55% of the H₂S could be recovered during the given sampling period. NH₃ emissions exhibited similar behavior between concentrations of 5000–40,000 ppb. Within the 30-min sampling period, 92.62% of the 5000-ppb NH₃ sample could be recovered. Complete recovery was achieved for concentrations >40,000 ppb. Predictive equations were developed for gas adsorption. From these equations, the maximum difference between chamber inlet and outlet concentrations of NH₃ or H₂S was predicted to be 7.5% at the lowest concentration used for either gas. In the calculation of emission factors for NH₃ and H₂S, no adsorption correction factor is recommended for concentrations >37,500 ppb and 2100 ppb for NH₃ and H₂S, respectively. The reported differences in outlet and inlet concentration above these ranges are outside the full-scale sensitivity of the gas sensing equipment. The use of 46–90 m of Teflon tubing with the flux chambers has apparently no effect on gas adsorption, because recovery was completed almost instantaneously at the beginning of the tests.     

The international register of potentially toxic chemicals

The benefits and drawbacks consequent to the widespread use of chemicals are inextricably interwoven. According to recent estimates, more than 8 million substances are presently known, 70,000 of which are in common use as industrial compounds, pesticides, Pharmaceuticals, food additives, cosmetics and the like. It is estimated that substances used as such will increase annually by 1000 in number. The deleterious consequences deriving from their exploitation pose tremendous challenges to the scientific community for the protection of human health and the environment. Therefore it is of utmost priority to appropriately select valid information generated in this investigation area and to convey it correctly to users. Here, the adoption of the principles of good laboratory practice in experimental activities is essential, as well as the creation of global networks for data exchange on the safe use of chemicals. The structure and goals of the International Register of Potentially Toxic Chemicals (IRPTC, the database of the United Nations Environment Programme) are detailed to give an example of such an undertaking. Seventeen fields are covered,i.e. identifiers, properties and classification, production/trade, production processes, use, pathways into the environment, concentrations, environmental fate tests, environmental fate, chemobiokinetics, mammalian toxicity, special toxicity studies, effects on organisms in the environment, sampling/preparation/analysis, spills, treatment of poisoning, waste management and recommendations/legal mechanisms.     

Global Warming, Uncertainty and Endogenous Technical Change

What impact does ecological uncertainty have on agents' decisions concerning domestic emissions abatement, physical investments, and R&;D expenditures? How sensitive are the answers to these questions when we move from exogenous to endogenous technical change? To investigate these issues we modify the ETC-RICE model described in Buonanno et al. (2001) by embedding in it a hazard rate function as in Bosello and Moretto (1999). With this model at hand we run numerical optimisations focusing our attention on the control variables of the representative agents, i.e., domestic abatement rate, investments in physical capital, and R&;D spending, as well as on the endogenous patterns of GDP level and CO₂ emissions. Our results show that uncertainty strongly influences agents behaviour; in particular, agents slow down their emissions in order to maintain a more sustainable growth path. In addition, R&;D expenditures trigger the “engine of growth” exclusively when environmental technical change is formalized in an endogenous fashion. However, even if environmental uncertainty may stimulate technical change, long-run growth it turns out to be negatively affected by the former, as also predicted by Clarke and Reed (1994) Tsur and Zemel (1996) and Bosello and Moretto (1999).     

Policy misfits,climate change and cross-scale vulnerability in coastal Africa: how development projects undermine resilience

Coastal social ecological systems in eastern Africa are subject to a range of environmental, social and economic changes. They are already vulnerable to these multiple stressors, and the impacts of climate change are likely to further exacerbate their vulnerabilities. Some of these impacts may be observed and experienced already. The analysis presented in this paper is based on mixed methods empirical research exploring local perceptions of recent changes at four sites in coastal Tanzania and Mozambique. People recognise and rank a number of climate and non-climate stressors which have contributed towards more risky and less diverse livelihoods. Importantly, regional and international policy initiatives – in the form of river basin management in Mozambique and South Africa, and development of a Marine Protected Area in Tanzania – are perceived to further erode resilience and exacerbate vulnerabilities. We suggest this is a form of policy misfit, where policies developed to address a specific issue do not take account of cross-scale dynamics of change, the interactions between multiple stressors, nor longer term climate change. This policy misfit may be remedied by a move towards adaptive forms of governance, and necessitates an explicit focus on building the adaptive capacity of the poor and most vulnerable in society.     

Arsenic concentration in topsoil of central Chile is associated with aberrant methylation of P53 gene in human blood cells: a cross-sectional study

Gene expression can be modified in people who are chronically exposed to high concentrations of heavy metals. The soil surrounding the Ventanas Industrial Complex, located on the coastal zone of Puchuncaví and Quintero townships (Chile), contain heavy metal concentrations (As, Cu, Pb, Zn, among others) that far exceed international standards. The aim of this study was to determine the potential association of the heavy metals in soils, especially arsenic, with the status of methylation of four tumor suppressor genes in permanent residents in those townships. To study the methylation status in genes p53, p16, APC, and RASSF1A, we took blood samples from adults living in areas near the industrial complex for at least 5 years and compared it to blood samples from adults living in areas with normal heavy metal concentrations of soils. Results indicated that inhabitants of an area with high levels of heavy metals in soil have a significantly higher proportion of methylation in the promoter region of the p53 tumor suppressor gene compared with control areas (p-value: 0.0035). This is the first study to consider associations between heavy metal exposure in humans and aberrant DNA methylation in Chile. Our results suggest more research to support consistent decision-making on processes of environmental remediation or prevention of exposure.

     

Pollution from polychlorodibenzo‐p‐dioxins and furans: The case of several foundry plants in the Lombardy region

In 1991 a co‐operation between Public Health Office (U.S.S.L.) n° 18 of Brescia and the Chemical Section Laboratories of U.S.S.L. n° 38 of Milan concerning the possible environmental impact of foundry industrial activities performing metallic scraps recovering, has been undertaken.

Soil and surfaces have been classified in conformity with the National Toxicological Consultative Commission (C.C.T.N.) recommendation dated 12/02/1988'; owing to the characteristics of the processed material, besides heavy metals, polychlorodibenzo‐p‐dioxins (PCDDs), polychlorodibenzofurans (PCDFs) and polychlorobiphenyls (PCBs) have been looked for.

The particulate matter collected from the filters positioned over the arc furnaces in 14 foundry plants has been characterized and classified, according both to C.C.T.N.¹ and to the Interministerial Board regulation dated 27/07/1985 for the first application of the Republic President Decree Law (D.P.R.) n° 915/1982, concerning wastes classification, based, in this case, on these toxic chlorinated compounds concentrations. From the very beginning, high levels of PCDDs and PCDFs have been detected, corroborating the very few literature data from foundry plants². The results obtained on 14 different foundries allow us to draw already some information, acceptable from the point of view of the statistical validity, about the pollution produced by this industry.     

δ15N and δ13C values in dental collagen as a proxy for age- and sex-related variation in foraging strategies of California sea lions

We assessed the foraging habits of California sea lions, Zalophus californianus, from Isla Santa Margarita, BCS, Mexico, by analyzing δ¹³C and δ¹⁵N values of dentin collagen. Since dentin is deposited annually in growth layer groups (GLGs), it can be subsampled to construct ontogenetic isotopic profiles at the individual level. We drilled 20 canine teeth and obtained 141 samples for isotopic analysis that were assigned to age-specific categories from GLG-based estimated ages. Pups’ GLGs had the highest mean δ¹⁵N values and the lowest mean δ¹³C values, a pattern likely driven by the consumption of milk. Juveniles had δ¹⁵N values between those of pups and adult females, which may reflect continued nursing into the second year or preferential consumption of coastal benthic versus pelagic prey. Significant differences were observed between the sexes of adults; adult females had lower mean δ¹³C and δ¹⁵N values than adult males. Higher isotope values in adult males relative to females may reflect a higher trophic position, but differences in foraging grounds cannot be excluded as a potential explanation because tracking data are not available at this time. Evidence of intra-specific foraging diversification may be related to a strategy to reduce competition within and among age and sex categories.