Daily dietary intakes of zinc,copper, lead,and cadmium as determined by duplicate portion sampling combined with either instrumental analysis or the use of food composition tables,Shiraz, Iran

Estimation of essential and toxic element intakes is crucial to evaluate the risks of deficiency or toxicity. The purpose of this study was to investigate and also to compare the dietary intakes of zinc (Zn) and copper (Cu) by adults living in Shiraz, Iran, determined by two procedures: duplicate portion sampling of 21 hospital meals combined with either instrumental analysis (voltammetric measurement) or the use of food composition tables (FCTs). The level of exposure to lead (Pb) and cadmium (Cd) was evaluated as well. The daily Zn intakes of both methods were not significantly different and were higher than the RDA values except the value measured by the instrumental analysis which was lower than the RDA established for a male adult. Daily intake of Cu determined by instrumental analysis was significantly lower and closer to RDA for adults compared with the value estimated by FCTs. The dietary intakes of Pb and Cd were 313 and 61 % of the respective provisional tolerable weekly intakes (PTWIs), respectively. The accuracy of two methods used for estimation of Zn intake was similar. In the case of Cu, the use of FCTs, in which the influence of environmental conditions and dietary habits of meal preparation is not taken into account, overestimated dietary intake. The risk of zinc deficiency was found in adult males. Moreover, the estimated intake of Pb, but not Cd, could be a cause of concern for Shiraz population. Thus, conducting regular periodic studies to assess the dietary intake of mentioned elements are recommended.     

Salinity modulates biochemical and histopathological changes caused by silver nanoparticles in juvenile Persian sturgeon (Acipenser persicus)

Environmental Science and Pollution Research - The objective of this study was to evaluate the effect of salinity on the acute and sub-chronic toxicity of silver nanoparticles (AgNPs) in Persian...     

Bioleaching of heavy metals from sewage sludge,direct action of Acidithiobacillus ferrooxidans or only the impact of pH?

Journal of Material Cycles and Waste Management - The bioleaching process comprises two mechanisms: direct action of the bacteria and indirect effect of low pH. In this work, the effect of bacteria...     

Risk assessment for hazardous lubricants in machining industry

Knowing that over two-thirds of lubricant disposals return to the environment with no purification process, adequate strategies are demanded to reduce their risks. For this reason, the main focus of the present study is to describe an environment-friendly approach. In the first part, two widely used lubricants (mineral-based and vegetable-based) were introduced, and the reasons for their hazards were investigated. The composition of mineral-based lubricant was characterized by x-ray fluorescence elemental analysis. The result showed the presence of phosphorus, chlorine, and zinc dialkyl dithiophosphate in its composition that many scholars considered them to be the leading risk factor in the chemical composition of mineral-based lubricants. It has been focused on the potential risks of vegetable-based lubricants, which many researchers have identified as a safe lubricant. The Pseudomonas microbe was cultivated in the vegetable-based sample, and the result showed that although vegetable-based lubricants are compatible with humans, bacteria colony can quickly grow there without making any apparent changes that lead to harm to operators in a mysterious way. In the present work, the hypothesis of the safety of unreinforced vegetable-based lubricants has been rejected, and a new window on the environmental issues of vegetable-based lubricants has been presented. In the final, to eliminate environment-human risks and to reduce consumption of lubricant and natural resources to green manufacturing, a comprehensive study on the possibility of completely removing lubricant was performed. The results showed that the machining without lubricant could be replaced with the traditional method.

     

Predominance of clade D <Emphasis Type="Italic">Symbiodinium</Emphasis> in shallow-water reef-building corals off Kish and Larak Islands (Persian Gulf,Iran)

Scleractinian coral species harbour communities of photosynthetic taxa of the genus Symbiodinium. As many as eight genetic clades (A, B, C, D, E, F, G and H) of Symbiodinium have been discovered using molecular biology. These clades may differ from each other in their physiology, and thus influence the ecological distribution and resilience of their host corals to environmental stresses. Corals of the Persian Gulf are normally subject to extreme environmental conditions including high salinity and seasonal variation in temperature. This study is the first to use molecular techniques to identify the Symbiodinium of the Iranian coral reefs to the level of phylogenetic clades. Samples of eight coral species were collected at two different depths from the eastern part of Kish Island in the northern Persian Gulf, and Larak Island in the Strait of Hormuz. Partial 28S nuclear ribosomal (nr) DNA of Symbiodinium (D1/D2 domains) were amplified by polymerase chain reaction (PCR). PCR products were analyzed using single stranded conformational polymorphism and phylogenetic analyses of the LSU DNA sequences from a subset of the samples. The results showed that Symbiodinium populations were generally uniform among and within the populations of eight coral species studied, and there are at least two clades of Symbiodinium from Kish and Larak islands. Clade D was detected from eight of the coral species while clade C was found in two of species only (one species hosted two clades simultaneously). The dominance of clade D might be explained by high temperatures or the extreme temperature variation, typical of the Persian Gulf. Publication of this article was held up owing to technical problems. The publisher apologizes sincerely for this lengthy delay.     

Effects of TiO2 nanoparticles on the aquatic plant Spirodela polyrrhiza: Evaluation of growth parameters, pigment contents and antioxidant enzyme activities

Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles (TiO₂-NPs) are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO₂-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated. Initially, structural and morphological characteristics of the used TiO₂-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8nm was confirmed for the synthesized TiO₂-NPs. Subsequently, entrance of TiO₂-NP_S to plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO₂-NPs on S. polyrrhiza. The increasing concentration of TiO₂-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO₂-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.     

Comparison of energy produced from waste by removing its different components: A case study of the waste landfill in Tehran

In developing and populated cities such as Tehran, a massive amount of municipal solid waste (MSW), both wet and dry, is transferred to landfills daily. Combustion is one of the most common methods of using mixed waste energy from the past to the present. The Dulong formula is widely used to calculate the energy released from MSW combustion. According to the constituent components of Tehran MSW, removing food waste leads to an increase in energy potential, which will be a suitable condition for energy production. In this work, the energy derived from the combustion of mixed and separated dry MSW generated in Tehran was calculated using the experimental Dulong formula and tables in Integrated Solid Waste Management (Tchobanoglous et al. 1993, McGraw‐Hill). The Dulong formula indicates that the use of Tehran mixed MSW (without separating materials for recycling) as a fuel source yields 8,966.40 KJ/kg while the use of Tchobanoglous et al. (1993) tables can generate 8,236 kJ/kg. By removing food waste and recyclable materials, the potential of energy production changes to 22,047 kJ/kg using the Dulong formula and 16,207 kJ/kg and the Tchobanoglous et al. (1993) tables. It indicates increase by 1.46 times and 46%, respectively. Regarding the 200‐ton capacity of the Tehran waste incinerator, the Dulong formula indicated generation of 4,409 MJ/day energy, and the Tchobanoglous et al. table presents 3,241 MJ/day. Therefore, considering that Tehran generates more than 4,000 tons of reject waste daily, it can easily be converted to energy rather than landfilled. This can alleviate the problem of buying land and construction of landfills and leachate generation.     

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO₂, Ce_0.92Zr_0.08O₂, and Ce_0.84Zr_0.16O₂ composed of 5–6 nm crystallites display T_m-CO2 (the temperature at maximum CO₂ yield) at 383, 355, and 375°C under 10 vol.% O₂/N₂, respectively. The size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O₂^? and O^?) for soot oxidation. Thus, the activities of Ce_0.92Zr_0.08O₂ and Ce_0.84Zr_0.16O₂ in soot combustion are better than that of CeO₂. Although oxygen vacancies promote the migration of lattice O^2?, the enriched surface Zr also inhibits the mobility of lattice O^2?. Therefore, the T_m-CO2 of Ce_0.84Zr_0.16O₂ is higher than that of Ce_0.92Zr_0.08O₂. Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.     

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010

Environmental Geochemistry and Health - There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in...