Distribution of lead in relation to size of airborne particulate matter in Islamabad, Pakistan

Airborne particulate matter (PM) collected from two sampling stations in Islamabad, Pakistan, was analyzed for lead content and size gradation. A high volume air sampler was used to trap particulates on glass fiber filters for 8-12 h on a daily basis. Lead was estimated using a nitric acid digestion based AAS method on 44 samples from station 1 and 61 samples from station 2. Particle size fractions were categorized as <2.5, 2.5-10, 10-100 and >100 microm. The correlation between lead concentration and particle size was investigated. The results from two stations indicated average airborne lead concentrations of 0.505 and 0.185 microg/m3. Enhanced levels of lead were measured at a maximum of 4.075 microg/m3 at station 1 and 4.000 microg/m3 at station 2. PM < 2.5 and PM > 100 were found to constitute the local atmosphere in comparable proportions. A comparison of the lead levels is made with the existing permissible levels of this element laid down by different international agencies.     

Assessing the potential ecological risk of Co,Cr, Cu,Fe and Zn in the sediments of Hooghly–Matla estuarine system,India

Environmental Geochemistry and Health - Hooghly–Matla estuarine system along with the Sundarbans mangroves forms one of the most diverse and vulnerable ecosystems in the world. We have...     

Comparative distribution of the scalp hair trace metal contents in the benign tumour patients and normal donors

The scalp hair samples of benign tumour patients (n = 77) and normal donors (n = 86) were analysed for selected trace metal contents using atomic absorption spectrophotometry. In the scalp hair of benign tumour patients, highest average levels were found for Ca (1,401 microg/g), followed by Na (476.9 microg/g), Mg (441.6 microg/g), Zn (438.3 microg/g), K (119.2 microg/g) and Fe (96.38 microg/g) while in comparison, the maximum mean levels in the scalp hair of normal donors were shown by Ca (556.5 microg/g), followed by Zn (154.2 microg/g), Mg (153.4 microg/g), Na (97.45 microg/g) and Fe (81.68 microg/g). Almost all metal levels revealed higher dispersion and asymmetry in the scalp hair of benign tumour patients compared with the normal donors. The average concentrations of Ca, Cd, Co, K, Mg, Mn, Na, Ni, Pb, Sb, Sr and Zn were significantly higher in the hair of benign tumour patients compared with the normal donors. Significant gender-based differences were also observed in the scalp hair metal contents of benign tumour patients. Strong positive correlations were found between Cd-Cr (0.547) and Cd-Co (0.507) in the hair of benign tumour patients whereas Ca-Mg, Mg-Sr, Co-Cd, Cr-Cd, Li-Cr, Li-Co, Li-Cd, Na-Cd, Na-Co and Na-Li exhibited strong relationships (r > 0.50) in the hair of normal donors. Cluster analysis (CA) and principal component analysis (PCA) were used for the source identification and apportionment of scalp hair trace metals in the two donor groups. The scalp hair of benign tumour patients and normal donors revealed six and five main clusters of trace metals, respectively. PCA extracted seven principal components of trace metals in the scalp hair of benign tumour patients while six principal components were observed in the case of normal donors. The study evidenced significantly different patterns of metal distribution in the hair of benign tumour patients in comparison with normal donors.     

Statistical source identification of metals in groundwater exposed to industrial contamination

Levels of selected metals Na, Ca, Mg, K, Fe, Mn, Cr, Co, Ni, Cd, Pb and Mn were estimated by flame atomic absorption spectrophotometry in groundwater samples from Kasur, a significant industrial city of Pakistan. Salient mean concentration levels were recorded for: Na (211 mg/l), Ca (187 mg/l), Mg (122 mg/l), K (87.7 mg/l), Fe (2.57 mg/l) and Cr (2.12 mg/l). Overall, the decreasing metal concentration order was: Na > Ca > Mg > K > Fe > Cr > Zn > Co > Pb > Mn > Ni > Cd. Significantly positive correlations were found between Na–Cr (r = 0.553), Na–Mn (r = 0.543), Mg–Fe (r = 0.519), Mg–Cr (r = 0.535), Pb–K (r = 0.506) and Pb–Ni (r = 0.611). Principal Component Analysis and Cluster Analysis identified tannery effluents as the main source of metal contamination of the groundwater. The present metal data showed that Cr, Pb and Fe levels were several times higher than those recommended for water quality by WHO, US-EPA, EU and Japan. The elevated levels of Cr, recorded as 21–42 fold higher compared with the recommended quality values, were believed to originate from the tanning industry of Kasur.     

Female CEO succession and corporate social disclosure in China: unveiling the significance of ownership status and firm performance

Environmental Science and Pollution Research - This study intends to examine the effect of CEO succession with gender change from male to female (i.e., female CEO succession) on corporate social...     

Multivariate analysis of trace metal levels in tannery effluents in relation to soil and water: a case study from Peshawar, Pakistan

Tannery effluents and relevant ground water and soil samples collected from various tanning industries of Peshawar were analyzed for Na, Ca, K, Mg, Fe, Mn, Cr, Co, Cd, Ni, Pb and Zn by the AAS method. The metal concentration data for the three media are reported in terms of basic statistical parameters, metal-to-metal correlations and linear regression analyses. Metal distributions in the three media were quite divergent and showed non-normal distributions with high standard deviation and skewness parameters. Sodium exhibited the highest mean levels of 1,277mg/L, 881mg/L and 12,912mg/kg in the effluent, ground water and soil samples, respectively. Among other metals, Cr concentrations were 410mg/L, 0.145mg/L, 100mg/kg and Ca, 278mg/L, 64.8mg/L, and 2,285mg/kg in the effluent, ground water and soil samples, respectively. Some significant correlations were observed between effluent and soils in terms of Na, Cr, Ni, Co and Pb. The ground water-soil interrelationship suggested that Na levels in the soil and ground water were significantly correlated with each other (r=0.486, P<0.01). Similarly, Cr in the soil is strongly correlated with Ca in ground water (r=0.486, P<0.01). These results were duly supported by the linear regression analysis of data. The source identification studies conducted using Principal Component Analysis (PCA) and Cluster Analysis (CA) evidenced that ground water and soil were being contaminated by the toxic metals emanating from the tannery effluents.     

Efficient removal of heavy metals from electroplating wastewater using polymer ligands

Poly(hydroxamic acid)-poly(amidoxime) chelating ligands were synthesized from poly(methyl acrylate-co-acrylonitrile) grafted acacia cellulose for removing toxic metal ions from industrial wastewaters. These ligands showed higher adsorption capacity to copper (2.80 mmol?g⁻¹) at pH 6. In addition, sorption capacities to other metal ions such as iron, zinc, chromium, and nickel were also found high at pH 6. The metal ions sorption rate (t_1/2) was very fast. The rate of adsorption of copper, iron, zinc, chromium, nickel, cobalt, cadmium and lead were 4, 5, 7, 5, 5, 8, 9 and 11 min, respectively. Therefore, these ligands have an advantage to the metal ions removal using the column technique. We have successfully investigated the known concentration of metal ions using various parameters, which is essential for designing a fixed bed column with ligands. The wastewater from electroplating plants used in this study, having chromium, zinc, nickel, copper and iron, etc. For chromium wastewater, ICP analysis showed that the Cr removal was 99.8% and other metal ions such as Cu, Ni, Fe, Zn, Cd, Pb, Co and Mn removal were 94.7%, 99.2%, 99.9%, 99.9%, 99.5%, 99.9%, 95.6% and 97.6%, respectively. In case of cyanide wastewater, the metal removal, especially Ni and Zn removal were 96.5 and 95.2% at higher initial concentration. For acid/alkali wastewater, metal ions removing for Cd, Cr and Fe were 99.2%, 99.5% and 99.9%, respectively. Overall, these ligands are useful for metal removal by column method from industrial wastewater especially plating wastewater.     

Investigation on the role of graphene-based composites for in photocatalytic degradation of phenol-based compounds in wastewater: a review

Environmental Science and Pollution Research - The ineptitude of conventional water management systems to eradicate noxious compounds leads to the development of advanced treatment systems. The...     

Detection of Norovirus and Hepatitis A Virus in Strawberry and Green Leafy Vegetables by Using RT-qPCR in Egypt

Food and Environmental Virology - There is an upward trend of consumption of organic fresh vegetables due to consumer demand for healthy foods without chemical additives. On the other hand, the...